I am using a Telerik combobox and using jquery to make a clone of it.
the control is being rendered correctly, however the dropdown is not working I believe due to the fact the javascript has not been initialized on the control.
Is there a way to do this or a better way to make a duplicate of the control?
I may have to resort to making an ajax request but would ideally like to keep it all clientside.
I have the following items bound to my combobox:
Value: 1, Text: SNS
Value: 2, Text: ING
Value: 3, Text: ING
Choosing value 1 results in a SelectedValue of 1
Choosing value 2 results in a SelectedValue of 2
Choosing value 3 results in a SelectedValue of 2
does the combobox has as a disadvantage that the Text has to be unique?
I'm try to add a combobox to my form which i have done and populate it with the infomation i need but i want to stop the user from being able to edit the first 5 character in the textbox part of the combo box( 1 is this possible 2 am i going about it in the right way).
I have 3 columns fro a db to enter ips ie 123.456.7.89 at the start if each number i want (SE1)(SE2)(SE3) which i can do at the momment . So I get in the combobox list 3 items with (SE1)123.456.7.89 OR just (SE1) depending of i a result is returned from the DB. However i don't want the user to be able to edit out the (SE?) part of the sting in the textbox. When editing i've tried used the text change event to try and capture the change and make sure the string.length > 5 , but the event does not fire also when i leave the combobox it it adds to the combox list. If I refersh it goes back to how it should be with only the 3 items.
I have a problem with CascadingDropDown... I have two related comboboxes, where the second is a slave of the first (e.g. country the first, cities the second). What I want is that if I select one country from combobox 1 then the second must be "filtered" by that selection (it should display all the cities inside the selected country, and the actual CascadingDropDown implementation is OK), but if I leave the combobox 1 in the default option (e.g. "Please select a country") I want the second to display all the cities I have in the database. The problem is that when selecting default option for combobox 1 the second combobox is disabled and a postback to my webservice never occurs.
View 3 Repliesin aspx i written as follows
<ajaxToolkit:ComboBox ID="cmbAddressAlias" runat="server" DropDownStyle="Simple" AutoCompleteMode="Suggest" CaseSensitive="false" AutoPostBack="true" RenderMode="Inline" Width="170px" CssClass="cmbProvince" OnSelectedIndexChanged="cmbAddressAlias_SelectedIndexChanged"> </ajaxToolkit:ComboBox>
it binding correctly(datasource dynamically binded) and it raises event too while changing index but it is not raising event when we manually clearing the combobox text..if currently combobox having text "ASP" then i manually select that entire text and using del key i am deleting but it is not raising event for me.. when i change index it automatically raising event...i need to raise event while combobox is empty...
How do you refresh a combo box from clicking on something from another Combobox (using Visual Basic).
I don't want to use a button for this as i know it works that way by using .Databind() on the other combobox.
In access it is so easy by using the click event on a combo box but visual studio does not seem to use it.
i create a web part in the code behind page and i didn't nkjow how to
initializes
[Code]....
I want to create my own naming convention for page events rather than AutoEventWireUp but I couldn't find Component Initialize methods any where ? Should I override it ? But in which class it is defined ?
Edit :
For example : I don't want to use Page_Load but LoadThisPage naming. So It should be like
Load += new LoadThisPage(sender,e);
I was expecting a InitializeComponent method where I can initialize page,controls etc. events handlers...But it turned out to be Constructor function :
So what confused me is I thought there should have been a method like InitializeComponent which does things for me already created by Designer itself so I thought I could define my own event handler names within this method by overriding it in the say Default.aspx.cs .
I have - for instance - an asp:FormView which supports Read, Insert, Update, Delete and is bound to a DataSource:
[code]....
If I am in Read-Mode or Edit-Mode the control is initialized with the property MyText of the current object which is bound to the FormView.
But when I go to Insert-Mode I do not have a "current object" (FormView1.DataItem is indeed null) and the controls are empty.
If I want to have my TextBox control initialized with a specific value how can I do that? In which event can I hook in to set default values to the controls in the InsertItemTemplate?
Especially I have in mind using an ObjectDataSource. I was expecting that the InsertItemTemplate is initialized with a business object which underlies my ObjectDataSource and which is created by the ASP.NET framework simply by using its default constructor when the InsertItemTemplate gets activated. In the default constructor I would init the class members to the default values I'd like to have in my controls of the InsertItemTemplate. But unfortunately that's not the case: No "default" object is created and bound to the FormView. So it seems I have to initialize all controls separately or to create the default object manually and bind it to the InsertItemTemplate of the FormView. But how and where can I do that?
see this code:
[Code]....
While in constructor i am gettine error, Aobj(0).type is not initialized, it says that Object reference not set to an instance of an object. how to initialize my objects?
I was looking for a custom membership/role provider and came across The Altairis Web Security Toolkit Looked at the source and this is just perfect for what I had in mind. So I implemented it in my project, created a database and tables and configured it in my web.config. Everything compiles fine, but seems I'm being stupid in how to actually use it. (Looking at the source code here might be useful in helping me out) Just to see it work, I'm making a call like this:
Code:
private readonly KrokSqlMembershipProvider_membershipService;
_membershipService = new KrokSqlMembershipProvider();
MembershipCreateStatus status;
_membershipService.CreateUser("krok", "password", "[URL], "", "", true, null, out status);
However when I debug the code, I realize that in the MembershipProvider class the configuration settings to be loaded from the web.config are empty, so it fail when trying to connect to my database (empty connection string). I notice the settings are retrieved in the Initialize method, but I'm not sure if I'm suppose to call that, and if so, how. (The sample application that comes with the source code have no code in it. It's asp.net, while I'm using asp.net mvc)
I am getting the error Configuration System Failed to Initialize , i have two projects inside my solution and Listed belwo is the app.config for each of them
Project-1 Data Layer App.config
[Code]....
I have a site that uses ActiveRecord. I'm getting an exception that says "An ActiveRecord class () was used but the framework seems not properly initialized. Did you forget about ActiveRecordStarter.Initialize() ?" This is a web application, and the Initialize() method is called by the Application_Start event handler.
I created a new page that also calls the initialize() method. If I visit that page once, then the rest of the site works. If I visit it a second time, I get an exception stating that the Initialize() method can only be called once.
I've tried modifying the web.config and resetting the application pool to force Application_Start to run.
This only happens in production; dev, my stage, and client stage are fine. Production is the only load-balanced environment--I'm not sure if that comes into play.
Edit: We have another site deployed in the same environment which successfully uses ActiveRecord with the same initialization code. One difference is that the site that is working has only the ActiveRecord code in Application_Start; the site that doesn't also sets up some URL routing in Application_Start.
Can i initialize var with null or some empty variable.
View 7 RepliesI'm having a hard time with the page cycles when using masterpages and contentpages. My masterpage has two linkbuttons that are used to select a language (using resources). When these buttons are clicked I create Session["language"]. The goal I have is to 'translate' my masterpage after the buttons are clicked AND to translate the content page.I've been trying all kinds of different methods (Page_Load etc) based on this url: http://msdn.microsoft.com/en-us/library/dct97kc3.aspx but it never works like it should. Usually the content page only gets translated after two clicks. I can't figure out the cycle problem between the masterpage and the content page combined with the click-events.
View 1 RepliesI have an automatic property
public int GearCount { get; set; }
when i try to initialize it like this-
Tandem t = new Tandem(GearCount = 5);
It gives an error as below
The name 'GearCount' does not exist in the current context
Whats wrong here ? Also if i do normal intantiation it works fine.
Tandem t = new Tandem();
How can I write the C# code (aspx) to initialize the user control with some default property values? I mean where/which event? I have a user control with a gridview that I bind on container page. On page load of the container page I bind the data. I tried writing the initialization code in initproperties but it didn't work. Please suggest where can I set the default values for my usercontrol?
Edited:As suggested by DOK.. I already have a property and I change width of one of the DIVs. Here is the code that is not working.
public int CollapsiblePanelWidth
{
set[code]....
this works only if I set the width on calling program. Otherwise the default value of style="width: 105px;" is not added.
I am getting asp.net development server error.Though I have formatted my machine and there is no virus in the machine still I am not able to run asp.net in file system and could not work with asp.net website administration tool. some memery related error message such as:The application failed to initialize properly(0xc000007b)click to terminate application. Pls give me proper solution for this.I have tried to copy fresh webserver.exe file from another machine and pasted in c:programmfilescoomomfilesmicrosoftshareddevserver9.0webdev.webserver.exe file.still issue persists.what could be wrong.
View 2 RepliesI'm overriding the Controller.Initialize method to set some stuff before each ActionResult is executed, however I'm finding that the method is being called multiple times for each request (anywhere between 2 - 10 times). I'm running in Cassini.
My hunch is that it is running for all static files (images, css etc) as well as the requested action - although I may be wrong? I thought maybe something was wrong in my web.config but it all looks right to me.
in my controller I have code that validates URL. if not valid I want it to 301 redirect:
[code]....
but this still goes continues on and executes any code after. how would i simply 301 redirect? and NOT continue to process any code after break;?
I designed a user control. It contains a public property "CurrentValue". When I try to initialize the property using an Eval expression, a null value is assigned.
// In below code, label assignment is OK, RatingNull user control assignment get null
<asp:TemplateField>
<ItemTemplate>
<asp:Label ID="Label1" runat="server" Text='<%# Eval("Difficulty") %>'
<uc1:RatingNull ID="RatingNull1" runat="server" CurrentValue='<%# Eval("Difficulty") %>' />
</ItemTemplate>
If I directly assigned a value (ie, CurrentValue="5"), user control works fine.
public partial class RatingNull : System.Web.UI.UserControl
{
private string _CurrentValue;
public string CurrentValue
{
get { return _CurrentValue; }
set { _CurrentValue = value; }
}
(...)
I have my owned siteMapProvider, I need phisical file path to initialize it but I can't use HttpContext to do that, because IIS 7 will thrown exception:
fileName = HttpContext.Current.Server.MapPath(fileName);
How can I do MapPath without HttpContext?
I have two class
e.g
List Class
Value Class
And List Class is inherits from Value Class
e.g
Public Class List
Inherits List(of Value)
Question:
I have Master Page and in master page i have user control, where i want to keep adding value in mention list class and i want to use this list class values in other pages.
How can i adding value in list class without intializing with new??
I want some drag and drop stuff on my website. I found some javascript that works when using it with a simple html page, but when I tried to put it in my asp site it doesn't.
In site.master (between the head tags):
Code:
<script type="text/javascript" src="~/Scripts/Javscriptfile.js"></script>
and then:
Code:
<body onload="redips.drag.init()">
And the error is:
Microsoft JScript runtime error: 'redips' is undefined
My page is using the Master page. I am using TabContainer ajax control in my aspx page and have a TabPanel that contains a RadioButtonList control and a text box. I want to show/hide populate the text box based on on the selected value of RadioButtonList. I am able to populate values of all the controls on Page_load() but onlclick()event dos not get triggered. How can force onclick() JavaScript event to trigger for the default selected value of RadioButtonList?
View 1 Replies