Installation :: Application Failed To Initialize Properly
May 16, 2010
I am getting asp.net development server error.Though I have formatted my machine and there is no virus in the machine still I am not able to run asp.net in file system and could not work with asp.net website administration tool. some memery related error message such as:The application failed to initialize properly(0xc000007b)click to terminate application. Pls give me proper solution for this.I have tried to copy fresh webserver.exe file from another machine and pasted in c:programmfilescoomomfilesmicrosoftshareddevserver9.0webdev.webserver.exe file.still issue persists.what could be wrong.
View 2 Replies
Similar Messages:
Apr 9, 2010
On Windows XP I installed the .Net Framework 2.0 and my test aspx page worked fine. I then installed the .Net framework Service Pack 2 and then it breaks .Net. I get a Server Unavailable message and when I run aspnet_regiis -i I get a C0000005 error with message 'The Application failed to initialize properly.'
FYI, I have Symantec Endpoint Protection installed on my PC.
View 2 Replies
Jun 12, 2010
SQL Server Express 2008 R2 installation is failed...plese see the error log ...i gave the password "sa"..please guide me Overall summary Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Exit message: The specified sa password does not meet strong password requirements. For more information about strong password requirements, see "Database Engine Configuration - Account Provisioning" in Setup Help or in SQL Server 2008 R2 Books Online.
View 1 Replies
Feb 24, 2011
I am getting the error Configuration System Failed to Initialize , i have two projects inside my solution and Listed belwo is the app.config for each of them
Project-1 Data Layer App.config
[Code]....
View 1 Replies
Feb 22, 2011
I've encountered a problem while installing Visual Studio 2010 on Windows 7, I've tried to modify the privileges of the destination folders to no avail, I've also tried to delete everything related to it with a removal tool. The problem is that the installation is always unsuccessful at the same point, providing me a Blue Screen of Death (twice) and the following error message (infinite amount of occasions):
[Code]....
Does anybody know the cause of the error? Is there an easier and less time consuming solution than reinstalling the whole system?
View 1 Replies
Jun 18, 2010
I have developed website using .NET 2.0 and I am trying to host the same on IIS 5.1. It works on my machine where I am domain user with all the administrator rights on my machine. I can access the website from other machine on the network using IP address of my machine in URL
But it fails when I am trying to host on my clients machine. Here is the list of errors I get.
I already tried using
1. iisreset
2. aspnet_iis -i
Here is the list of the errors that I get
[Code]....
View 2 Replies
Jan 16, 2010
After i finished installing visual stuido 2008 it said SQL sever 2005 express returned an unexpected value, it looks like it didn't install properly
In the folder SQL 2005 express edition there is a folder called configuration tools with has 3 applications, is this normal?
There is no other folder under SQL 2005. I tried to re-install it and the same thing happened
View 5 Replies
Mar 12, 2010
I got the same error on two different machines:
PC 1: Latest Win XP Pro, MS Visual Studio 2008 SP1
PC2: Win Server 2008, Visual Studio 2008 SP1 and Visual Studio 2010 RC.
On both machines near the end of installation process it displayed the same error message
Two log files (links displayed on error message) are as follows:
mvc2_install.txt
webpi.txt
View 7 Replies
Jan 18, 2010
I've just got a new computer and have moved my Web Applications from the old XP over to my new Win 7 machine. When I run my the applicatinos, I get an error that says "Failed to map the path '/'.". Line 130: Line 131: // Get encryption and decryption key information from the configuration. Line 132: Configuration cfg = Line 133: WebConfigurationManager.OpenWebConfiguration(System.Web.Hosting.HostingEnvironment.ApplicationVirtualPath); Line 134: machineKey = (MachineKeySection)cfg.GetSection("system.web/machineKey"); I'v read several answers to this, and they all say that we should run VS as administrator. But my colleague runs the same applications, with the same settings on his similar computer/system, without running it as administrator. So my thought is that it must be possible to solve this withour running VS as administrator. Does anybody know why and perhaps how to solve it
View 4 Replies
Jan 18, 2011
Recently i am getting the follwoing error when i run my application in localhost.
Failed to map the path '/mechano/App_GlobalResources/'. I believe the error is occured after installing sp3.
I have VS2008(3.5) and sqlserver 2005. Recently i have installed SP3 and uninstalled SP3 as it made my pc very slow. Before installing SP3 everything worked well.
I have tried the following to get rid of the error, but none of this steps helped me
1.
"In RegEdit, give ASPNET account full access to:
HKEY_CLASSES_ROOTInterface{70B51430-B6CA-11D0-B9B9-00A0C922E750}"
2.
First step was to delete the ASPNET user account and then run the aspnet_regiis utility in the framework folder:
c:WINNTMicrosoft.NETframeworkv2.0.50727aspnet_regiis -i
This will re-register ASP.NET with IIS and re-create the ASPNET account.
Next you need to give permissions to the (nicely refreshed) ASPNET user account to access this folder with Modify permissions:
C:Documents and SettingsAll Users.WINNTApplication DataMicrosoftCryptoRSAMachineKeys
A quick restart of IIS (quick-tip: simply type iisreset in a run dialog to restart your IIS) and you should be away. It worked for us anyway :)
View 2 Replies
May 7, 2015
I got an error "A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond".when i am sending email when attachment.
protected void lbtn_DownloadForm_Click(object sender, EventArgs e)
{
using (StringWriter sw = new StringWriter())
{
using (HtmlTextWriter hw = new HtmlTextWriter(sw))
{
pnlPerson.RenderControl(hw);
[code]....
View 1 Replies
Mar 23, 2010
I have an application written in VB.NET that sends XML to another server and it takes another XML. I am using HttpWebRequest in sending it but when I get the request stream I got this error. Please note that the application is working on my machine, but on the deployment on server I got this error.
View 4 Replies
Dec 22, 2010
when i try to run a aspx file in the directory that have aspx mapped and running asp.net the follow error occour The process account used to run ASP.NET must have read access to the IIS metabase (e.g.IIS://servername/W3SVC). For information on modifying metabase permissions, please see
[URL]so i use the registration tool with the command -ga Marcelo for the account Marcelo just as say the link provide. But i still have the same error on try to run the page. What is the proprialy procide for this stop to happend?
View 2 Replies
Aug 19, 2010
I'm having a doozy of a problem, and can't find a solution. I have a WFC Web Service installed to a pair of servers, and accessed through a load balancer. I am accessing the service from an ASP.NET client app, also via WCF. The Client is not load balanced.I'm getting an intermittant error:
(Inner Most Exception) System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond x.x.x.x:80(Middle Exception) System.Net.WebException: Unable to connect to the remote server(Outer Exception) System.ServiceModel.EndpointNotFoundException: Could not connect to http://<MYSite>/<MYApp>/<MYService>.svc.TCP error code 10060: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond x.x.x.x:80.
I can reproduce this error with about 20% reliability if I execute the exact same page request on the client from 2 browsers at the same time. When the problem occurs, the successful page request returns in about 5 seconds, and the failed page request returns in about 30 seconds.I'm guessing that there is some additional latency when the load balancer decides to switch my session to another server, and that is making some timeout setting on my client to be exceeded. I need to research this performance characteristic... any thoughtsbut its not my core question.My core question is... Exactly what setting can I tweak to increase the "period of time" the "connected party" is allows to "properly respond".This is the basicHttpBinding configuration I am using on both sides of the communication:
<basicHttpBinding>
<binding name="LongerTimeout"
sendTimeout="03:00:00"
maxReceivedMessageSize="2147483647"
maxBufferPoolSize="2147483647">
<readerQuotas maxArrayLength="2147483647" maxStringContentLength="2147483647"/>
</binding>
</basicHttpBinding>
I've seen some indication that setting the receiveTimeout value on the server may help, but I set this to 1 second in a test environment, and was unable to reproduce the problem, leads me to believe its not worth a production environment change to verify this.
View 3 Replies
Jul 7, 2010
my code
using System;
using System.Collections;
using System.Configuration;
using System.Data;
using System.Linq;
[code]...
A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 74.125.155.109:465Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 74.125.155.109:465Source Error:
[Code]....
Line 34: mailClient.EnableSsl = true;Line 35: mailClient.Timeout = 1000000; Line 36: mailClient.Send(mailMessage);Line 37: mailMessage.DeliveryNotificationOptions = DeliveryNotificationOptions.Delay;Line 38: mailMessage.DeliveryNotificationOptions = DeliveryNotificationOptions.OnFailure;
Source File: d:My
WebsitesBenefitsBenefitsDefault.aspx.cs Line: 36
Stack Trace:
[Code]....
[SocketException (0x274c): A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 74.125.155.109:465] System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) +239 System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP) +35 System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception) +224[WebException: Unable to connect to the remote server] System.Net.ServicePoint.GetConnection(PooledStream PooledStream, Object owner, Boolean async, IPAddress& address, Socket& abortSocket, Socket& abortSocket6, Int32 timeout) +5482743 System.Net.PooledStream.Activate(Object owningObject, Boolean async, Int32 timeout, GeneralAsyncDelegate asyncCallback) +202 System.Net.PooledStream.Activate(Object owningObject, GeneralAsyncDelegate asyncCallback) +21 System.Net.ConnectionPool.GetConnection(Object owningObject, GeneralAsyncDelegate asyncCallback, Int32 creationTimeout) +332 System.Net.Mail.SmtpConnection.GetConnection(String host, Int32 port) +160 System.Net.Mail.SmtpTransport.GetConnection(String host, Int32 port) +159 System.Net.Mail.SmtpClient.GetConnection() +35 System.Net.Mail.SmtpClient.Send(MailMessage message) +1213[SmtpException: Failure sending mail.] System.Net.Mail.SmtpClient.Send(MailMessage message) +1531 Benefits_Default.Page_Load(Object sender, EventArgs e) in d:My WebsitesBenefitsBenefitsDefault.aspx.cs:36 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35 System.Web.UI.Control.OnLoad(EventArgs e) +99 System.Web.UI.Control.LoadRecursive() +50 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927
View 3 Replies
May 7, 2015
I got server error when downloading pdf file from my webpage in asp.net."A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond in asp.net."
Code:
protected void btnPdf_Click(object sender, EventArgs e)
{
imgphoto.Src = "http://localhost:51350/Project/imagesLogin/black.png";
string imgurl = Convert.ToString(imgChart.ImageUrl);
imgurl = imgurl.Replace("~", "");
imgChart.ImageUrl = "D:/Project" + imgurl;
Chart1.Visible = false;
[code]....
View 1 Replies
Feb 2, 2010
I got an "Package load failure" message as below:
Package "Microsoft.visualStudio.ShellConfigPackage..." has failed to load properly.
I uninstall and re-install vs2008 but no luck.
How to fix it?
View 1 Replies
Apr 8, 2010
on desktop start has disappeared, getting above issue on double clicking/running any application.have VS2005 installed with sp1 and all other relevant updates as per MS..., i read some forums which states because of VC++ the system files may be currupted....have not installed VC++can anyone guide me the issue here and its solution...
View 3 Replies
Jan 27, 2011
When clicking on design view button - Received error "Microsoft.VisualStudio.Xaml" has failed to load properly(GUID = {E58C2A8B-BCC4-4559-AD59-D62EB6D58A22}). Possible environment corruption.
View 2 Replies
Jan 11, 2010
While configuring website in IIS "Failed to Access IIS metabase" problem is coming
View 1 Replies
Jun 24, 2010
I have been trying to install VS 2008 profesional in my computer, I am getting this error "Package Visual Web Developer HTML source editor package has failed to loas properly GUID = BFCC0C3C-6F87-4285-A6C8-BB1606180OD Please contact package vendor for assistance, application restart is recomended , due to possible environment corruption.
View 7 Replies
Mar 1, 2011
earlier i had win xp & VS2005 , i had a web application ajax based which was working fine. i changed th eOS to win 2008 , installed & confirgued IIS
now when i am trying to exccute the application the page is not getting displayed even after a long time
when i build the application in this new OS there are no Errors shown but the page of the web application is not displayed
i even tried thr' IIS , selected the first page & clicked browse but that too is not showing
wht chngaes needs to be made ? & where do i debug??
View 3 Replies
Apr 7, 2010
I am using custom menu that internally uses javascrip and css. On my development server it is working fine but when I deploy the web application on windows server 2003 (64bit), the main menu is not showing properly for few hours (same day), however form next day of deployment its showing fine.
I am using VS 2008. Net 3.5.
View 3 Replies
Apr 16, 2010
I'm quite new to ASP and I can't seem to figure out how to get the application/website to work properly on my webserver. The first thing I had done was to build the solution, shortly followed by 'build website' and at last, to 'publish website'. It saved the files to C: -> Documents -> MS VS -> Projects -> My website.
There, the following files are found:
Account [folder]; App_Data [folder]; Scripts [folder]; Styles [folder]; bin [folder]; Web.config; Site.master; Default.aspx; About.aspx and PrecompiledApp.config.
I then uploaded these via FTP to my webserver and accessed the appropriate URL. Seems nothing showed up in root beside "Index of/". When I tried to access /Default.aspx, nothing but text appeared (which would be the code displayed in Default.aspx).
I've also read some tutorials regarding this matter where they instructed me to upload directly from Visual Studio to the FTP server, but I'm kind of afraid that it'll delete everything in said folder, as I don't know what the structure of said direct upload should be like.
View 2 Replies
Sep 19, 2010
I created a simple .NET 4.0 WebSite through VisualStudio 2010 using the Installed Template for ASP.NET Web Site.This brought me to "Choose Location" where I chose Local IIS, then Create New Web Application.This created the template app with all of the local files within IIS.This complies fine, but Im constantly getting the HTTP 403 Error "the website declined to show this webpage"I checked IIS properties for this and its set to 4.0 and the Directory Security has Anonymous Access enabled. Allow IIS to control password is also checked.I just installed VS 2010 on my new computer, and Im trying to get this configured so I can run 4.0 apps through IIS.
View 2 Replies
