When a create a web project ( ex webapplication) and when we publish it. We have Two folders created ( App_data and Bin) and have one file Default.aspx and web.config file.
My question.
1. Where is Default.aspx.cs file?
2. When a request will comes for example ( http://Mywebsite/default.aspx)
Does it goes to default.aspx page? or it goes to the webapplication.dll file which is under bin folder?
I've got a Silverlight app that has to accept some initial data when it fires up. That data, unfortunately, MUST come from XML input. In addition, I can't just pass it through the URL because the actual request is coming from a server external to my own.
So the basic setup is this: Remote server needs to launch my app. Remote server pops open a window on the user's PC with a URL directed at a CGI application that can accept the XML input. The CGI app parses the input and spits out an HTML page containing the Silverlight app with all of the init params set. Long story short: When the Silverlight app is opened this way I can't debug it. I attach to the process, but none of the break points can be hit.
I tried every way in the world to get the ASP.NET page that would normally host the Silverlight app to accept the XML in the URL but it would get stripped by ASP.NET because of security reasons and no amount of modifying the config file would fix it (since it was stemming from the other web server presumably).
<PagerStyle HorizontalAlign="Right" CssClass="paging"/>
<PagerTemplate>
<table width="100%">
<tr>
<td style="text-align:left; width:50%">
<asp:LinkButton ID="lnkPrv" Visible="false" CommandName="Page" CommandArgument="Prev" runat="server">Previous</asp:LinkButton>
</td>
<td style="text-align:right; width:50%;padding-left:50%;">
<asp:LinkButton ID="lnkNext" CommandName="Page" CommandArgument="Next" runat="server">Next</asp:LinkButton>
</td>
</tr>
</table>
</PagerTemplate>
Code behind is below
protected void gvProduct_PageIndexChanging(object sender, GridViewPageEventArgs e)
{
Literal1.Visible = gvProduct.PageIndex == 0;
LinkButton lnkPrv = (LinkButton)gvProduct.BottomPagerRow.FindControl("lnkPrv");
LinkButton lnkNext = (LinkButton)gvProduct.BottomPagerRow.FindControl("lnkNext");
lnkPrv.Visible = e.NewPageIndex > 0;
lnkNext.Visible = e.NewPageIndex < gvProduct.PageCount - 1;
gvProduct.PageIndex = e.NewPageIndex;
FillGrid();
}
The code does not give any error. I can see it set the visible property to true/false. But actual control on page remain same (always visible on every page).
I am a bit confused about these two sequence of events or processes happening in conjunction to each other. Does the page handler executes first or does the somepage.aspx get execute first or do they happen simultaneously?
View 2 RepliesI have a basic webform (method="POST") which I would like to "hide" in codebehind by using <asp:LinkButton> and using the OnClick-value to generate the form in C# & doing the http-request. So basically the form looks like this:
[Code]....
Now what I want is to have something like this:
[Code]....
Now my problem is that if i use the normal <form> it displays correctly and works correctly but if I try using <asp:LinkButton> I can't see anything on the actual page.
I had a page page url www.abc.com/AboutColors.aspx. I did url routing and changed it into url www.abc.com/About Colors. If I want to get the page name AboutColors.aspx then how i will get it on the page load.
If I have changed the url www.abc.com/ColorGallery.aspx to www.abbc.com/Colors/Colors Gallery then how i will get it. I am using asp.net 4.0.
The ASP.net 3.5 SiteMapPath Control shows the site map but not necessarily the path thru a site. If a user links from one page to another using a hyperlink, the Site Map does not seem to show the actual path, only the site Map. If this is incorrect, please let me know.If it is correct, do you know of another control that will show the actual path thru the site in a session?
View 8 Repliesis there any way how to highlight the actual number of page where I am ? .... somethink like this: < 1 2 3 4 5
6 7 8 >
I am wondering if there is anyway to grab the html that is generated from an ASP page.I am trying to pull a table from the page,and I foolishly used a static html page so I would not have to be constantly querying the server where this page resides while I tested out my code.The javascript code I wrote to grab to unlabeled table from the page works.Then when I put it into practice with the real page and found that the ASP page does not generate a viewable page with a jquery .get request on the URL.
Is there any way to query the page for the table I need so that the ASP page returns a valid page on request?(I am also limited to using javascript and perl for this,the server where this will reside will not run php and I have no desire to learn ASP.NET to solve this by adding to the issue of proprietary software)
My application is simple, I have 2 pages:
RSSProducer.aspx: A page that generates RSS (XML) feeds
RssConsumer.aspx: A page that retrieves the RSS feeds and displays it to the user in a repeater control. To do this I am using the System.Xml.XmlTextReader to fill a DataSet with tables based on the RSS-XML retrieved from the RSSProducePage. A table within the DataSet is bound to the repeater control.
For example, this is what I have in my RssConsumer.aspx page:
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Session("permittedToViewSomeDetail") = True
Dim url = "http://localhost/DevSite/RSSProducer.aspx"
Dim reader As New System.Xml.XmlTextReader(url)
Dim ds As New DataSet()
ds.ReadXml(reader)
myRssRepeater.DataSource = ds.Tables(2)
myRssRepeater.DataBind()
End Sub
My problem is that user-authorization details are stored in Session in the RssConsumer page that need to be accessed in the RSSProducer page (in this example it would be Session("permittedToViewSomeDetail") that I need to access in the RSSProducer page); however, the Session identifier is not common between the two. This means that I cannot access the authorization details in the RSSProducer page.
The reason for why is fairly clear to me:
User's browser makes a request to the RssConsumer page Server generates a Session ID (which is stored in a cookie) if there is no existing Session Identifer The RSSConsumer requests the RSSProducer page...which generates a new Session ID every time because no session identifier is ever going to be found.
I tried using cookieless session so that I could pass the SessionID via the URL to the RSSProducer page as an experiment but for some reason the XmlTextReader doesn't work well with this method (but the desired shared session does work). I've hit a brick wall here. Does anyone know how to share session between pages when one page makes a request to the other?
How could I get the url from the address bar. Im using c# for this. for example: if I type [URL]in my address bar, then i would get "[URL]" caption.
View 2 RepliesI need to set up routing in global.asax so that anybody going to a certain page with an actual tilde in the URL (due to a bug a tilde ended up in a shared link) is redirected to the proper place using routing. How can I set up a route for a URL with an ACTUAL tilde ("~") in it, e.g. www.example.com/~/something/somethingelse to go to the same place as www.example.com/something/somethingelse - it never seems to work!
View 2 RepliesI would like to take my usercontrols that are loaded dynamically and stick them into a list that references the actual object that has been loaded. So I can go into the list and pull results from the usercontrol. I would like to use mycontrol.GetResult() and it will then reference the control and grab the results from the form that has been filled out, which the results will be returned as a string. I do not want it to initialize a new control of the same type because I will not be able to receive my results then.
View 3 RepliesNormally we have to use scriptmanager control on our page whenever there is a need for update panel and other ajax controls. I want to know about actual function of scriptmanager.
View 2 Repliesany body have IPAddress and port for actual server that i can test my Client UDP?
i can't test it in local host
Our app uses session to keep track of users. We stuff their user id into session on logon. If the browser cache is cleared any refresh to the page is done then the user will see the log out sign - as the app cant get theuser id from session as the aspnet_session cookie wont be present in the request.Firefox works correctly but when I clear the cache on i.e. the session is maintained. The session ID's are the same for multiple requests.how I can debug the app to see what cookies its getting. How do I look at the actual cookie that is passed to .net?
View 2 RepliesI'm creating composite control, which has two other components that rely on each other.
In component A (image), I access component's B (input) UniqueID which equals
MyTextBox1$BoldTextBox
I use it in onclick JavaScript code...
But in rendered HTML input element has following id
MyTextBox1_BoldTextBox
So my javascript code , generated inside composite control has something like this:
onclick=$('#MyTextBox1$BoldTextBox').....
instead of:
onclick=$('#MyTextBox1_BoldTextBox').....
I have a website that hosts video files. Some are small around 5mb and some are up to 200mb. This site is not live yet, but when I try to do a test download, it doesnt show the total file size, it just shows how much it has downloaded and the speed.
I tried downloading a 5mb file and once it completed it had actually downloaded 15.2mb. The file worked fine but why was it so large when the actual file is not that size at all. The type of files that are donwloaded are FLV's and MOV's.
I have tested this on IE 6, IE 8, Chrome, Safari, and Firefox, all with the same results.
I am developing an ASP.NET web page with C#. I have a sitemap document but I want to hide certain nodes based on the user's credentials. However, I am having problems with my code removing the actual node. Visual Studio runs the program with no errors. However, the node is still there. Below is the code I have developed for this. The node changes text to "it worked" as I hope written. However, it will not remove itself. I can get the item to be disabled, change enablement, but I need to hide it completely from the viewers view - not the document.
[Code]....
I am trying to get a number returned from a webservice that executes a stored procedure and gets the record count from SQL. I then want to display an alert with the record count to the users, When they click on 'Check records' button. For now I am just using the alert to see if I could get a number back, here the code I am using:
$.ajax({
type: "POST",
url: "/WebserviceName.asmx/MethodName",[code]....
It just returns [object] rather than the actual data in the alert box in IE 7.0 however it works fine in Firefox and displays the valid record counts like 0, 10, 36 etc...So there some thing else I need to do to handle the JSON data in IE but
I have a situation where I need to display an actual error/exception that happened during processing after the OnFailure event of the AjaxOptions class fires. Is this possible? I know the OnFailure allows me to write a method that can display a custom error message. Instead of this error message, I'd like to display the actual exception.
Here is my code for the ajax form init.:
[Code]....
And then here is my Javascript method:
[Code]....
As you can see, I am currently displaying an errorMessageDiv which has the code:
[Code]....
I would love it though if I could show them the actual Exception message (which i have wrapped) so I can tell them the exact cause of error.
Is it possible to insert information into the gridview's pager, like "Showing 10 of 55 items (You are on page 3)" and bind that information accordingly to the actual PageCount and PageSize properties?
I can only think of doing it outside the pager, even outside the GridView.
I have more or less zero .asp knowledge but i'm hoping this will be quick and easy. Bots have been spamming our web form. I have a simple .php form that submits with an .asp script. The .asp checks for valid email address etc. but i need to check andilter the actual body content.
Body = Request("Body")
f Body = "" Then
I have a variable element in which I am passing a div and replacing object {0} with the actual control string I am getting. Here is my code.
[Code]....
string.Format(element, entities.ThumbnailImage);
In entities.ThumbNailImage I get the following image control string which I am trying to pasre, here is the string.
<img src='http://edgesuite.net/image/media/150_SOAK594002518_3000.jpg' id='imgrichFx8483' alt='' class='productClass' runat='server'/>
But string.Format gives me error, Input string was not in a correct format.
I want to embed a silverlight app into a web page and have the height/width of the div that contains the silverlight control match the dimensions of the actual size of the silverlight control.
I essentially want the div to stretch to accommodate the size of the silverlight control. I do not know what size the silverlight control will be before it loads as it is pulling in data and adding controls dynamically. I want to avoid dueling scroll bars and use only the browser scroll bars.
I need this to work in both IE and Firefox.Is there a way to accomplish this?