Trying To Add Functionality To Take In Data From A Serial Port And Then Put The Parsed Info Into A Series Of Textboxes?

Feb 1, 2010

I'm new here and I've run into a problem with my first asp project. I've taken over this webpage and am currently trying to add functionality to take in data from a serial port and then put the parsed info into a series of textboxes. Right now I can get the data from the serial ports but the text boxes refuse to show the data.

[Code]....

NOTE: These are System.Web.UI textboxes, so I can't use text delgate and Invokes (which is the usual solution I have seen)

View 7 Replies


Similar Messages:

Reading Data From Client Computer Serial Port Using Web Application?

Jan 2, 2010

Is it possible to read data from serial port of client system using asp.net web site. Here is my scenario

I will be having computers connected in LAN and a web application which resides on server. Each client computer will be connected to a external machine using serial port and is ready for reading data, external machine measures equipment details and sends through serial port.Now I need to read the same data using my web page, is it possible?

Like when we do video chatting our web page reads data from web cam and sends the stream to web page. this way how can I read data from client machine to web page.

View 1 Replies

Visual Studio :: Serial Port With Portable Data Terminal?

Aug 30, 2010

I am making application with portable data terminal which connected to serial port. User will go with portable data terminal and scan data with it than we will connect it to PC and read all the data from it.

View 2 Replies

Is It Possible To Use A Serial Port Like Session In C#

Jun 17, 2010

I am using serial port communication in my asp.net webform application...

[code]....

This method works when i send i single message... But when want to send sms in bulk opening and closing port everytime is not a good idea... So my question is it possible to use a serial port like session in c#?... When i open a port i want it to be open for 1 hour and then if my time expires i want to close the port and open it the next time...

View 1 Replies

C# - Display A Table With Various Info (names, Dates, Serial Numbers, Notes)?

Jul 28, 2010

I need to display a table with various info (names, dates, serial numbers, notes). In addition, there is one field I need to be one of three specified values (Raise, Lower, Release). What view would be the best/easiest to implement which would let me add/edit/delete entries as well as provide a drop down option for the Raise, Lower, Release options?

View 3 Replies

Web Forms :: Populate A Series Of Textboxes From An SQL Database Query?

Apr 6, 2010

I have a page of several textboxes, which I would essentially like to populate from a single query. However, to begin with, I find myself unable to even populate one textbox from one query!

I have based the following on a query previously advised to me for use with drop-down lists (hence the use of DataTable). I have adapted this as follows:

AddData.aspx:

<asp:TextBox ID="tbNewDataNum" runat="server"></asp:TextBox>

AddData.aspx.vb:

Partial Public Class AddData
Inherits System.Web.UI.Page
Dim CommonFunctions As New CommonFunctions
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load

[Code]....

I would like the Page_Load event to populate the textbox with this query, so that the value is present as soon as the page is presented. Also, how would you advise populating many different textboxes in one go, with one query? Is this possible too?

View 5 Replies

C# - How To Control A COM Port Parallel Port From Web Application

Jan 16, 2011

i can control a LPT port or COM port or any other hardware of server using ASP.Net with C#. I haven't found any clue in the internet.

I want to control a COM port Parallel port from web application.

View 2 Replies

Forms Data Controls :: Repeater Textboxes - Unable To Fetch The Values Of Textboxes

Aug 11, 2010

I have a repeater which is binded using a Collection of Entity Data Framework.

Once the repeater is binded using the datasource, the user can control the no of rows present in the repeater using a Dropdown list on the page. For ex: if datasource has 2 rows, user want to add 3 more rows, user selects 5 from dropdown, which adds 3 additional rows to the Repeater. I am able to do this.

The repeater has textbox controls in each row. Now once the user enter the values in this textbox of the newly generated rows, the user can save the values entered with the no of rows specified.

I have a button which is outside the repeater and on click of this i need to validate all the textbox values and save them into dB accordingly.

Here is my code

Repeater.aspx

[Code]....

[Code]....

Repeater.aspx.cs

[Code]....

Right now the problem is im not able to fetch the values of the textboxes present in the newly generated rows.

[URL]

View 1 Replies

Forms Data Controls :: Generating Serial Number In Gridview?

Jan 11, 2011

I want to generate serial number in gridview but the serial number should be equal to the count of records for a particular column(in my case No. of Villages).

I know how to generate serial number but i am unable to generate number of rows equal to the number of records of my datatable column(Village_Name---say for example 45 rows--- any no. of rows)

View 4 Replies

Forms Data Controls :: How To Generate A Serial Number Dynamically In Listview?

Sep 20, 2010

my listview having 3 columns:SI.No,HallticketNo,Name.

I bind data to listview but the "SI.No" column in listview showing Empty data.

So,how to generate serial number in listview ?

View 5 Replies

Forms Data Controls :: Creating Auto Serial No's In Datalist Control?

Sep 23, 2010

i have a data list control and i have bind it dynamically now i want to add a new serial no column and also display serial no's

View 1 Replies

C# - Transferring Info In A ViewModel Between Views And Controllers In MVC 2 Site Without Allowing Modification Of Info?

Jul 22, 2010

I'm building an ASP.NET MVC 2 site where I'm currently implementing an OpenID sign-up form. Unfortunately, I'm foreseeing a possible security bug/vulnerability inside my architecture.

Here's how I want OpenID login to work:

User requests /Account/Login, Controller sends back OpenIDLogin View. User enters their OpenID into the View, then OpenID authorization takes place, and finally the OpenID is returned to the Controller.The Controller checks whether the OpenID is currently in use by a user in the system or not. If it is, the user is logged in to that account. If not, the registration process begins.

And now, the OpenID registration process:

The OpenID identifier, as well as any other information provided by the OpenID provider (such as email address or name), is put into my custom ViewModel and sent to my OpenIDRegistrationForm View.The RegistrationForm View stores the OpenID in a hidden field to make sure that it gets sent back to the Controller.The user fills in the RegistrationForm View and sends it back to the Controller.The Controller creates the user account and puts the OpenID into the database.


The bug that I see within my architecture is that a user could modify the hidden value in the RegistrationForm View. Thus, they could spoof their OpenID! I will make sure to add another round of checking to the final Registration Controller Action to make sure that the OpenID that is provided doesn't exist yet, but there is still a possibility for spoofing. Can my architecture be improved somehow? I don't want this to end badly...

One solution I'm considering is encrypting the OpenID before I send it to the View and then decrypting it when it reaches the Controller. Should I try this?

View 1 Replies

.net - User Control's Contents Not Created Or Even Parsed?

Sep 1, 2010

I have an ASP.NET 4.0 application with some simple user controls. The user controls work fine on the design surface (VS.NET 2010), but when they're loaded during application execution, nothing shows up.

Furthermore, the various child controls of the user controls are null when referenced inside the code behind for the user control.

The code behind for the user control executes as expected, but any reference to child controls are null.

It's like ASP.NET is never parsing the .ascx to create the instances of the child controls.

View 1 Replies

Web Forms :: The Message Received From The Server Could Not Be Parsed?

Aug 16, 2010

I have used asp.net wizard inside update panel. Well in this, i have used combo box in second wizard and i have assigned integer character to combo. This gives an error while i press next button. But this works in 1st wizard page fine if i load it for the first time. For this code is as below:

<%@ Page Language="C#" AutoEventWireup="true" CodeFile="WizardTest.aspx.cs" Inherits="WizardTest" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

[code]...

View 7 Replies

Sys.WebForms.PageRequestManagerParserErrorException: The Message Received From The Server Could Not Be Parsed?

Mar 20, 2011

I am getting the following error using an update panel with a gridview.
Microsoft JScript runtime error:Sys.WebForms.PageRequestManagerParserErrorException:
The message received from the server could not be parsed.Common causes for this error are when the response is modified by calls to Response.Write(),response filters,HttpModules,or server trace is enabled.

I have looked at all the "fixes" for this and none of them seem to be working.It works just fine on page load but when I click my async button,One row of the grid processes(I can look in the javascript debug) but after the firstrow is processed,I get the above error at this line.

try {
_this._webRequest.completed(Sys.EventArgs.Empty);
}
finally {
if (_this._xmlHttpRequest != null) {
_this._xmlHttpRequest.onreadystatechange = Function.emptyMethod;

[code]...

I am completely stumped here,
Here is my AJAX Response from FireBug

14008|updatePanel|ctl00_ContentPlaceHolder_UpdatePanel1|
<table border="0" cellpadding="2" cellspacing="0" width="100%" id="Table3">
<tr>

[code]...

What I do in this code is convert a BLOB value from a database and store it in a string in a custom object.What seems to be happening is that there are odd characters being put at the end of the string.Here is what I am doing to convert the data

byteBLOBData = (Byte[])(row[3]);
row["data"] = System.Text.Encoding.UTF8.GetString(byteBLOBData);

[code]...

View 1 Replies

AJAX :: Sys.WebForms.PageRequestManagerParserErrorException: The Message Received From The Server Could Not Be Parsed

Jul 27, 2010

The error is this:

Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled.Details: Error parsing near '<!DOCTYPE html P'.

It appears in both FF and IE so far, and only happens on the live servers.

It occurs within partial (or attempted partial as they stop working and don't update) postbacks within an update panel on a form that is on every page. It doesn't always do it, but once it's broken, it's consistent. I have a suspicion that it kicks in after the pages in question have been posted back to by another page, but I'm not 100% about this. This form is absolutely integral to the function of the site.

View 3 Replies

Forms Data Controls :: Collecting Data In A Time Series?

Sep 9, 2010

I just wanted to get some ideas of what you would think be the best way to collect data/numbers that are part of a time series? Let's say I'm collecting monthly data from the users, related to some product and I'd like to be able to provide them a simple and efficient way of entering these numbers based on some month end period. So for instance on 6/30/2009, they could enter some numbers for a set of data points that pertain to that product. Would one of the data controls (such as GridView or DetailsView) be sufficient to do this? I know the GridView isn't so much able to save data but I believe the DetailsView has some functionality for that. In the end, I'd really like to provide a seemless way to do show this and ability to enter and save this.

View 2 Replies

Error While Opening A Document In Custom Grid / The Message Received From The Server Could Not Be Parsed

Apr 1, 2010

I have a grid within another grid. In the detail grid I have image button for which I am giving the URL of documents in the source itself. On clicking on Image button, document can be opened for which I am using a Handler. The code for opening the document is written in the handler.This code is as below:

[code]....

The document can be opened when clicked on Image Button. but, the problem is taht after opening the document, I am unable to perform any other action in the grids.... Other actions like...selection in checkboxes(master grid contains few check boxes),other link buttons in detail grid....etc etc...I am getting the following errr:

PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled

This is because after opening any document,for any action again Handler is being called.

View 1 Replies

AJAX :: Runtime Error: Ys.WebForms.PageRequestManagerParserErrorException: The Message Received From The Server Could Not Be Parsed?

Nov 11, 2010

I have the following source code, but it is not working properly. All 3 panels popup OK. but in Panel3 I have a RadioButtonList that changes the date in the BeginDate and EndDate dropdowns. But what happens is that when the posback happens Panel 2 Reappeals overlapping Panel3 just a little. When I click on continue I get the following error.Microsoft JScript runtime error: ys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled.
Details: Error parsing near '<script>window.open('.Can anyone help me figure out this error. My coding might not be right? Here is my code.

[Code]....

View 16 Replies

VS 2008 Chart Series - Fill From Data Table

Jul 13, 2012

I am using Chart control to loop through and fill from GridView and it works fine.

Code:
myProductSeries.Points.AddXY(GridView1.HeaderRow.Cells(i).Text.ToString, GridView1.Rows(0).Cells(i).Text.ToString)

My question: How would I do that using a DataTable instead, is that possible. Does DataTable have a "Header" like GridView so do I fill the X value?

View 5 Replies

HttpHandlers / Modules :: Acessing Data Through Port?

May 7, 2010

I am supposed to extract the data which will be pushed through a dedicated port to the given Static IP address of a system / Server. The service that pushes the data is NOT a web service. This service supports SMTP, HTTP GET, HTTP POST, UDP and TCP protocols and the data format is XML. How can this data be accessed using dotnet platform??? Please provide any pointers on the same.

View 2 Replies

Forms Data Controls :: How To Generate An Automatic Series In Sql Server

Aug 13, 2010

i want to generate a unique number into a textbox from sql server table everytime when i click a submit or save button ...

View 3 Replies

Forms Data Controls :: Displaying Chart With Broken Series

Jul 14, 2010

I am using the Chart control that is part of the newest version of ASP.NET. In this Chart, I have 3 Spline series. Each series consists of a nullable in array (int?[]). If the element in the array is a number, I wants it point plotted. However, in the case that the value is null, I do not want it plotted. Is there a way to do this? If so, how?

View 1 Replies

Forms Data Controls :: Missing Points In Chart Series?

Aug 30, 2010

so I have 3 series that are created from Cross Table Data Bind. Unfortunately some of the points are missing. Is there an algorithm I can use to cycle through the datapoints for each series and insert empty points to the correct spots so that my data is displayed correctly?

View 2 Replies

Vb.net - Chart Labels To Display At The Data Points On Multiple Series?

Mar 9, 2011

I have an ASP Chart (v4) which displays the data I need perfectly. I want it to show labels at the top of the data points and I am having some difficulty with it.

Here is my code that works for both series but does not display the labels:

[code]....

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved