I've a web project where i've an Tab Container (ajaxtoolkit), and when i run the project it works properly. But when i debug it, it gives me erros in all the controls inside the Tab Container that i'm accessing through .cs code behind (buttons, checkbox, etc).
Visual Studio gives me "The name 'controlname' does not exist in the current context". This happen to all controls inside the Tab Container that i'm accessing in code behind, but the Web project is running with no problems! As it's the first time that i use an Tab Container, i don't know if this is normal or maybe of Visual Studio 2010 RC (or not).
I have a ajax tab container that has a gridview inside one of the tab panels. I set the width of the grid view to less than the width of the tab container, but the gridview is not inside the tab panel. It goes outside the tab panel lines. How do I keep it inside the tab panel and have the horizontal and vertical scrolls bars for when it is larger than the tab panel?
I have a ajax combobox inside a table row which is hidden (display:none) on page load in javascript.
When user clicks a hyperlink, i need to show this row. But when i make this row visible (display:block), the ajax combobox dropdown button and list does not show up.
If I make the row always visible, then the combobox appears fine.
I read about this problem of showing a ajax combobox which was hidden on page load, but not able to get a proper solution.
There has been a couple times now that I have tried to have a panel inside a Tab Page of the Tab Container. Each time I run into the same problem. The extenders drop shadow property wont work. The rounded property of the drop shadow extender works fine but for the life of me I cant get the drop shadow to appear. Every other time this has happened I have just given up the search for the answer and left out the drop shadows because it wasnt a big deal but this time I think it would really make my page look good so I decided it was about time i posted something about this issue. (run-on sentences are my specialty)
The following code will recreate the bug / problem I am having
I am working with asp.net tab control currently with two tabs. The first tab is a list of jobs to be worked. The gridview id is "gvJobs". I call the ScrollableGridPlug via
$(document).ready( function () { $('[id*=gvJobs]').Scrollable({ ScrollHeight: 450
[code]...
When i click at the Equip Tab is get a blank gridview. There is a scrollbar on the left side indicating there is data in the gridview; however there is nothing visible. Additionally is there a way to scrollable function when I click on the appropriate tab?
So I'm trying to implement the delete selected button.. How exactly do i point to the specific checkbox for a particular row from codebehind when all 3 have the same name chkSelected? I know how to do it with a gridview, but not quite sure how if we do it with a for loop..
Can I do something like this inside btnDelete_Click?
I am trying to access the current 'active' top level node from a sitemap repeater from outside of the ASP.NET repeater used to render it, this is for CSS styling purposes as I want to place the child nodes on the subsequent row with different styling horizontally. At present I have the following code which I can't get to display correctly using CSS.
[code]....
I would like to display the child nodes on the next light blue element which I can do perfectly well from a seperate div if this was not rendered using a child repeater. In the image below Blog and Services are top level nodes and their subseqent nodes (2 for each) should be displayed on the light-blue row below. Is this possible?
If i've the button outside an update panel (basically i'm using RadAjaxPanel by Telerik) it is working fine. But when the button is inside an ajax panel, even if i click OK for deleting the records the server side code is not called.
I have added a table to my FormView Edit template for structure and a button that pops up a form for information.
When the button is clicked I want a check box in neighboring cell to become checked. But I am having problems in the VB code behind, establishing the name of the check box to change its state. Its something like this....
accessing a control inside the nested controls. Here is what i want to do. I click on the "add me" link inside the repeater and the ModalPopupExtende pops up with a textbox and the update linkbutton. I type something in the textbox and I click on the linkbutton update notes. My question is how do response.write the text i entered in the textbox?
I keep getting a null reference when I try to access a listbox inside the EditItemTemplate of a formview. I check the mode before accessing the control (Formview1.CurrentMode) to make sure it is in edit mode and even set it manually to edit mode again! But formview1.findcontrol("blah") returns null. Formview1.EditItemTemplate does not have a FindControl method, not sure what else to try.
I have a UserControl inside the ItemTemplate of my FormView and I need to access it in order to get an event fired off. As the UserControl is inside the template, my event cannot see it!
I've been searching all day for a solution to this, but nothing has worked.
Here's my scenario: I'm binding the gridview to a datatable. One of the columns is a textbox that will accept user input.
When a "submit" button is clicked, I need to loop through all the rows, get the textbox's text, and add them all together. Simple, right?
I've tried the following (this is on the "submit" button's click event):
[Code]....
The itemtemplate looks like this:
[Code]....
The txtDays.Text property is ALWAYS empty. UNLESS I assign it a value w/in the control. But then it's ALWAYS that value. I need to get the value of what the user enters.
I created a user control in Asp.Net which I populate with <asp:Table id = "...." /> this table has columns that contain dropdownlists, textfields and other web controls. In the code behind I am not able to access these web controls, is there a way I can access them. or I shouldn't be doing that in the code behind of the user control? here is my ascx code markup:
I know in standard VB.Net development, you can access any form field from within a module class but I'm not sure how to do it using Web Forms.Here is my scenario:I have a Module.vb where I am putting all my Database Functionality. In each of my functions, I'm using a Try Catch construct.
I have a page called Article.aspx that takes content from the database. I would like to use the title of the content as the title of the page for a little SEO I am doing. I setup a literal on the aspx page that must take the value of the content title from the code behind, what is the best way about doing this? I'm guessing I need to open a data base connection to read the record from the table but I am still learning asp.net and not sure how to write it
while creating cascadded dropdown inside the tab container.if i create two these control separately in a page then its work but whenever i plced the cascadded combo inside the tab container it is not worked.
I've been playing with a certain detailsview for most of last week. This particular control is located within a panel that is hidden until a user clicks a linkbutton on a gridview. Then the panel's visible property is set to true and the detailsview is populated based on the commandargument passed through the link button. What I've discovered is that with each postback, the datakey or control parameter, still not sure which or if both, is lost. I've discovered a lot about ViewState and how controls work and am a bit surprised that something as common as using a detailsview within a gridview wouldn't be handled better than it is now. I have been able to get the proper information to build a correct select statement when the user decides to edit a record. I am now working on an update statement, but for some reason while I have the right key to update the right record, I am unable to access the user-generated data that was entered in the details view.
For instance, I select record with ID of 1 in the gridview. It pulls up the detailsview and I can view it. I then click edit. The correct record is still there. (It was previously going to default). When I enter new text in a textbox and click update, the app still knows I am working with record #1 but doesn't seem to be able to find the textbox control. I have currently hard-coded a value into the field just to see if I could actually get the record to update and it did. I am using an OnInit to cause the sub to run and think this might be the problem. However, I have been unable to find a better way around this.
Here is the sub that executes on the OnInit() of the detailsview:
Protected Sub notes_binding() If notesDetail.CurrentMode = DetailsViewMode.Edit Then sqlNotesUpdate.UpdateCommand = "UPDATE [Oilchange_Notes] SET [notes] = '" & CType(notesDetail.FindControl("notes"), Textbox).Text & "' WHERE [vehicle_id] = " & Session("unitNumVal") sqlNotesUpdate.UpdateCommandType = SqlDataSourceCommandType.Text sqlNotesUpdate.Update() End If sqlNotesUpdate.SelectCommand = "SELECT * FROM [Oilchange_Notes] WHERE ([vehicle_id] = " & Session("unitNumVal") & ")" End Sub
And this is the error I get: Object reference not set to an instance of an object. If I'm correct about why it's not pulling the actual value or even acknowledging the control exists and is actually 'notes' (it is), then at would point would be the best to place this code?
Works find on initial page load, but gives me "Object variable or With block variable not set." on this like "ColourHex = e.Item.DataItem("ColourHex")" on postback?
