We've just upgraded to IE8 and for some reason only a portion of an .aspx page, created using VS05, is displayed. All of my Labels and TextBoxes are in an UpdatePanel. If the site is run locally on my PC, everything is fine. Has anyone else experienced this and is there a fix?
View 8 RepliesI have included 5 tables in my crystal reports as follows
I have added the first four fields in patientdetails table in the header of report, which is displayed properely.
when I add the fields from bloodinfo table I can view only the fields of the 1 st patient, that too 4 times.
almost every patient has the data under bloodinfo but I can view only of one.
In my application, there is only a login page and a report page. When the user enters his login credentials he will be redirected from the login page to the reports page. I am using forms authentication for this purpose.
On the reports page I will be displaying various reports (using Telerik reporting) based on user inputs for various fields.
Now here is the funnier part; My application works correctly in all browsers (including Safari on windows platform). But when I open it in an Ipad I am getting the below error,
"Potentially dangerous request.form value was detected from the client " This error occurs when the forms authentication redirection happens from the login page to the reports page.
I tried a variety of solutions like setting ValidateRequest="false" & requestValidationMode="2.0" , but none of them helped. I also tried removing the forms authentication and that also didn't
I have a sql database and want to store the image format into the database. I want to then display the image in a gridview. For the database I have entered the location of the image and not sure if this is the right thing to do. I'm not very good at this stuff so could you make it as simple as possible.
View 3 RepliesI've got an issue where I'm unable to view Ajax controls within the Visual Studio toolbox section What makes this issue even more bizzare is that I'm able to view the controls of the .dll (AjaxControlToolkit.dll) in a test website. I can see Visual Studio iterate through the controls and add them to the tab in one project and absolutely nothing in the other. I've already checked to see if another tab has my controls and done multiple Toolbox resets. Obviously, I need consistency with this and for me to be able to easily add controls to my target website...Does anyone know why one VS2008 project displays controls correctly in one place but not in another project?
View 4 Replies I have a sql data souce that returns several columns of data, and they are displayed in a DetailsView on a pretty simple vb.net page. I'm stuggling with one field though for the details view.
It's a template field, and if ClientType=1 (this value is determined else where on the page), then the label in the template field should have Text='<%# Bind("ClientName") %>', but if the ClientType = 0, then the label in the template field should have Text='<%# Bind("ClientTemporaryName") %>'
How do I tell the details view to set the text for ClientName to one or the other?
[Code]....
I have a relatively complex dataset (numerous tables, some with multiple records) generated from reading in an XML file. I need to connect said dataset fields to an ASP form. At the moment I'm assigning them manually, like so in the pageload:
txt_first_init.Text = formData.ds.Tables["phrmHdrKey"].Rows[0]["first_init"].ToString();
txt_last_name.Text = formData.ds.Tables["phrmHdrKey"].Rows[0]["last_name"].ToString();
ddl_pregnancy_flag.SelectedValue = formData.ds.Tables["pPhrm"].Rows[0]["pregnancy_flag"].ToString();
And conversely when it's time to submit.
formData.ds.Tables["phrmHdrKey"].Rows[0]["first_init"] = txt_first_init.Text;
formData.ds.Tables["phrmHdrKey"].Rows[0]["last_name"] = txt_last_name.Text;
formData.ds.Tables["pPhrm"].Rows[0]["pregnancy_flag"] = ddl_pregnancy_flag.SelectedValue.ToString();
I did some looking into binding the textboxes (and dropdownlists, and checkboxes, and and and...) directly, but it seemed to be too many formats to use.
So this works fine, but as the number of fields increases, those load and unload lists are going to get unwieldy.
I am using TempleteFields for all columns in my GridView. In that columns I am using only some fields for customization but not all.
Is there any performance issue with Databound Fields vs Templete Fields in a GridView...?
Do I need to replace the remaining columns with Databound Columns instead of TempletField columns...?
I am working on Crystal Reports 8.5 and SQL Server 2000 as backend. I have a stored procedure which has been added to the Crystal Report. So that fields are visible in the Fields object section from where i can drag and drop the fields on the report and display it. But now as they want more fields i have written two select statements for displaying required fields. But these newly added fields are not visible in the Fields object section in the Crystal Reports. I have done verify database, removed and again attached the SP but the problem is not solved.
View 1 RepliesI have quite a problem with a form that contains an autocomplete function. The page is an aspx page with c# codebehind.
On the form there is an address field that the user can type in any string address. This field is using an Ajax autocomplete extender, which roadnames to the user. This works fine. Furthermore the user has the option to add multiple address fields when clicking a button. This works fine now with Jquery. Jquery copies the table which contains, besides other fields, the address field, and "paste" it underneath the existing adress field.
Problem is, how do I attach the Ajax autocomplete extender to the address fields that gets added? Or is there another workaround to make all these fields have this autocomplete function?
Here is my simplfied code:
aspx page:
[Code]....
Jquery code that copies the address field:
[Code]....
I am putting a FormView together with three AJAX Calendar Control extenders in the FormView.The Form itself works fine. When I click on the Textbox or the ImageButton next to it, the Calaendar pup comes up. Some times it only shows the first two weeks. I often have to move to another tab on the form and go back to that tab in order for it to show the full calendar.Is there something I can do to fix this without having to move to another tab?Update;I figured out what it was. The form was cutting off the edges of the popup so that it was not allowing the popup to display completely.
View 1 RepliesI have multiple update panels with inside one or more text fields. Now I found out that when I update one update panel (with button inside update panel) all text fields are submitted, even them outside the update palen (and outside the validation group).
Is this correct behavior of the update panel?
How can I prevent submitting of all data? I only need the data of within the validation group.
This can be a huge performance issue when having an update panel in each tab (when using the tab panel).
I have an CONTACTS page.It has the 4 textboxes, the SEND button and the validation control for the 4 textboxes.How can i use an update panel, so when the user clicks on the SEND BUTTON, it does not do a postback ?
View 2 RepliesI have a formview in one of my pages and I need to use a collapsible panel extender for the FormView fields so as to get better navigation , classification of the fields. How can I achieve this.
View 2 RepliesMy problem is that I want to display a watermark on password field i..e Enter Password. But it is appearing as **********. I have seen it on facebook that when i see it first time text is appearing 'Enter Password' and when i enter my password it appears as *****. I know that with some dirty workarounds I can fix it. Is there any good solution for this here is the code which I am using
[Code]....
Q1: I have an Asp.net page , one textarea there the user can enter all his details like name age gender; how do get the get name, age, gender in seperate fields(text fields). how can i split?
Q:
dawn barric 25 male
answer:
text1: dawn barric
text2: 25
text3: male
How to validate HTML input fields using jQuery inside Ajax.BeginForm?
[Code]....
I have a user control which has a gridview with hidden fields in some of the template columns. The grid columns are created and bound by code dynamically in each postback and not in design mode. The gridview is placed in an update panel. In my aspx page where i use the user control , there is a dropdown which fires postback and based on the selected value of the dropdown the grid data gets filtered. The dropdown in aspx is not part of any update panel.
After the postback of dropdown, the grid data gets filtered and the grid is rebound with fresh values. The values in the controls like label, button or link button are bound correctly. But the values in the hidden fields are not refreshed and always points to the values of the rows that was generated before the postback of the page (initial page load).
I have a RadTabStrip that just refuses to show on page load or reload. WHen My page load, the control is supposed to be loaded in the back with data and then displayed on the page. That isn't happening. The process runs through as expected in the server side but the rabtab is not displayed at all. Below is my code. I did notice that every so often,when I click F5 the tabs display, only the only way I get them to refresh is to refresh the Page using F6 again.
[Code]....
I have two InlineEditBox.NET controls in a template field inside a GridView. When displayed in the GridView, the first row is OK, but starting with the second row, the controls are automatically displayed in edit mode when the page loads, and I can't figure out why.
[Code]....
I have a user control I created in asp.net 3.5. The user control has some buttons and a modal popup extender inside of it. I have added the control to one of the columns of my gridview. The propblem I am having is when I click on any other button in my control, then click on the button that displays the modal popup(client side), the grayed out modal popup area appears behind the grid, and I cant see nor access my panel. Here is my source for my user control.(I have tried playing with the z-index and other things, but nothing seems to work).
<%@ Control Language="C#" AutoEventWireup="true" CodeFile="ucParcels.ascx.cs" Inherits="UserControls_ucParcels"</textarea></p>
<input type='hidden' name='ID[7]' value='79140' />
<input type='hidden' name='URL[7]' value='http://forums.asp.net/t/1438592.aspx' />
<input type='hidden' name='CAT[7]' value='Visual Studio' />
[code]...
This is wot my page has...
<Updatepanel>
<datalist>
<panel>
<table>
<checkboxlist></checkboxlist>
[Code]....
I have created one multiselect drop using listbox.Its working fine.I used this multiselect dropdown in content page .The content page is too small to show the entire dropdown items.Need to scroll the content page to see all items.So i need to show the entire listbox item.or need to display the listbox like dropdown extender in Ajax.I am using asp.net 2.0
View 1 RepliesI am trying to use the modal pop up extender. I found this source, through a tutorial:
testpage.aspx:[Code]....
The problem is that nothing seems to happen. This should make Panel1 into a modal box and display it. Instead, it just reloads the page, displaying nothing. I'm working in visual studio 2010. My project is an asp.net project, using .net 4.0. The AjaxControlToolkit.dll is V 3.5.40412.2. I have no code behind the code. I did add a reference to AjaxControlToolkit in my project.
I have an Accordion control with the following markup:
[Code]....
Here is how it displays...IE8:FireFox:As you can see, in IE it acts as if I've set the AutoSize to "Limit". I know there is this known issue with IE6 and IE7:The AutoSize "Limit" mode works exactly the same as the "Fill" mode for Internet Explorer 6 and 7 because they do not support the max-height CSS
property. Does this also extend to IE8? If not, what is the problem?