I working with vs2010 and ajaxtoolkit version 40412.
In the previously version of toolkit I successed to debugging the built-in file script of the toolkit like ComboBox.debug.js but in current version the architecture is change and I don't success to drill down by debug (set breakpoint or debugger label) the script file
I want to debug EditPanel.debug.js file of HTML Editor, but it never shows in VS 08 and Im sure it executes to that line.What I did to enable debuggingUnchecked both 2 checkboxes for disabling the debugging
Set ScriptMode="Debug"
Change following line
[ClientScriptResource("AjaxControlToolkit.HTMLEditor.EditPanel", "AjaxControlToolkit.HTMLEditor.EditPanel.js")]
to
[ClientScriptResource("AjaxControlToolkit.HTMLEditor.EditPanel", "AjaxControlToolkit.HTMLEditor.EditPanel.debug.js")]
I would like to restrict what they see in the file upload dialog, which is set to "All Files" by default. I understand how to validate that they only uploaded a certain file type, that is not the question here. I would just like to know how to default the file type in the file selection dialog.
Is there any way to change this to "PNG only" or "*.png"?This is using AsyncFileUpload in the ASP.NET AJAX Control Toolkit.
When iam try to add ajax control dll file to my ajax toolkit given in visualstudio express edition 2005, i am getting the following error.
"There are no components in 'C:ProgramFilesMicrosoft ASP.NETASP.NET 2.0 Ajax Extensionsv1.0.61025AJAXExtensionsToolbox.dll' that can be placed on the toolbox." what is the error in this?
I've been dealing with an AJAX issue for some time now and I can't seem to find an answer anywhere. When I'm debugging and stepping thru my code it will jump into disassembly looking for a toolkit file. If I fit f5 I can continue debugging, but this happens often.
The latest one is:
Address: AjaxControlToolkit.ExtenderControlBase.ExtenderControlBase()
--- c:UsersswaltherprojectsaspNetAjaxReleases30930AjaxControlToolkitSourceAjaxControlToolkitExtenderBaseExtenderControlBase.cs
I setup the toolkit by adding a reference to AjaxControlToolkit.dll There's a line at the beginning of the markup...and everything appears to work outside of the debug issue.
[Code]....
I am using quite a few AJAX toolkit extenders e.g. RoudnedCorners extender, Watermark extender, etc. in my webpage. The problem is that these extendersadd a lot of script code to my webpage causing performance issue. Also, the presence of these extenders works against search engine as the actual content gets pushed down the page, thereby being risked skipped by search engines.
Is there any way where I can move these AJAX control extenders and/or their generated scripts to a different file ?
I have come to love this ToolKit massively;I wouldn't dream of completing a project without it now however I have come across a bug since the introduction of the WebKit Jscript rendering engine into Chrome and Safari3+. Therefore I have had to edit the source files of the ToolKit. I only made a simple change to accommodate for the lack of scrollTop offset changes within the HoverMenuExtender control. My question is how do I recompile the source so that it uses the HoverMenuBehavior.debug.js?
View 3 Repliesam trying to use the AsyncFileUpload control in ajax toolkit to upload a picture file, save the file on a location on the server's filesystem and display the picture file back to the client system. I have both the image and AsyncFileUpload controls inside an updatepanel but its seems the UploadedComplete server code is not firing when the file upload completes any clue?
View 3 RepliesWhen selecting an image for an item in file upload control of ajax toolkit (AsyncFileUpload), the only files that should be displayed are ".jpg, .jpeg, .gif, .bmp, or .png".
I currently can see every type of file.
When I format an accordion control using a skin file (as opposed to entering the formatting as attributes on each <asp:Accordion> tag), the control renders as expected when the website is run. However, in the VS2010 designer, the control won't display but instead shows the generic "Error Rendering Control" box which hasthe exception, "Collection was modified; enumeration operation may not execute."
View 1 RepliesWhat is available in .NET 3.5 that is AJAX but does not require the toolkit?
View 5 RepliesI'm trying to use the AsyncFileUpload control from the Asp.net Ajax Control Toolkit (Sept 30, 2009 stable build: 30930) . I've created a demo application and the control works fine. Files upload and all is well. When I try to use the control in my real application, I'm always receiving an error stating "The file attached is invalid". The AsyncFileUpload control returns this when the file uploaded is null.
To isolate the problem, I created a new master page exactly like the master page in my demo app. I also created an aspx page exactly like the page in my demo app. The upload still fails with a "The file attached is invalid" error. I also compared the web.config for the real app and the demo app and couldn't identify any differences that should matter. The code below is the test code in my real app. This code is exactly the same as the functioning code in the demo app with the exception of having different class names and file names. The web.config listed below is from the real app with the appsettings and connectionstrings removed. Real App Test Master Page:
<%@ Master Language="C#" AutoEventWireup="true" CodeFile="aaaMasterPage.master.cs" Inherits="L1Admin.aaaMasterPage" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Untitled Page</title>
<script type="text/javascript" src="js/jquery-1.3.2.min.js"></script>
<asp:ContentPlaceHolder id="head" runat="server">
</asp:ContentPlaceHolder>
</head>
<body>
<form id="form1" runat="server">
<asp:ScriptManager ID="scriptManager" EnablePartialRendering="true" runat="server" AsyncPostBackTimeout="180" />
<div>
<asp:ContentPlaceHolder id="content" runat="server">
</asp:ContentPlaceHolder>
</div>
</form>
</body>
</html>
Test Page:
<%@ Page Language="C#" MasterPageFile="~/aaaMasterPage.master" AutoEventWireup="true" CodeFile="aaaFileUploadTest2.aspx.cs" Inherits="aaaFileUploadTest2" Title="Untitled Page" %>
<%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="ajax" %>
<asp:Content ID="Content1" ContentPlaceHolderID="head" Runat="Server">
<script type="text/javascript">
function pageLoad(sender, args) {
}
function startUpload(sender,args)
{
$('#uploadMessage p').html();
$('#uploadMessage').hide();
}
function uploadComplete(sender,args)
{
showUploadMessage(args.get_fileName() + " uploaded succesfully - " + + args.get_length() + " bytes", '');
}
function uploadError(sender, args)
{
showUploadMessage("An error occurred during uploading. " + args.get_errorMessage(), '#ff0000');
}
function showUploadMessage(text, color)
{
$('#uploadMessage p').html(text).css('color', color);
$('#uploadMessage').show();
}
</script>
</asp:Content>
<asp:Content ID="Content2" ContentPlaceHolderID="content" Runat="Server">
<div id="uploadMessage"><p></p></div>
<ajax:AsyncFileUpload ID="pageBannerUpload"
CssClass="file_upload"
OnClientUploadError="uploadError"
OnClientUploadStarted="startUpload"
OnClientUploadComplete="uploadComplete"
onuploadedcomplete="upload_UploadedComplete"
runat="server" />
</asp:Content>
Real App Test Page Code Behind:
using System;
using System.IO;
using System.Collections;
using System.Configuration;
using System.Data;
using System.Linq;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.HtmlControls;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Xml.Linq;
public partial class aaaFileUploadTest2 : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
}
protected void upload_UploadedComplete(object sender, AjaxControlToolkit.AsyncFileUploadEventArgs e)
{
if (pageBannerUpload.HasFile)
{
string path = MapPath("~/") + Path.GetFileName(e.filename);
pageBannerUpload.SaveAs(path);
}
}
}
Real App Test Web.config:
<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
WindowsMicrosoft.NetFrameworkv2.xConfig
-->
<configuration>
<configSections>
<sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/>
<sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere"/>
<section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/>
<section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/>
<section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/>
</sectionGroup>
</sectionGroup>
</sectionGroup>
</configSections>
<appSettings>
</appSettings>
<connectionStrings>
</connectionStrings>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
-->
<compilation debug="true">
<assemblies>
<add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Transactions, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Data.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
</assemblies>
<codeSubDirectories>
<add directoryName="CSCode"/>
<add directoryName="VBCode"/>
</codeSubDirectories>
</compilation>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Windows"/>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
<pages>
<controls>
<add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add tagPrefix="Annsa" namespace="Annsa.Controls" assembly="Annsa.Controls"/>
</controls>
<namespaces>
<add namespace="Microsoft.VisualBasic"/>
<add namespace="System.Data"/>
<add namespace="System.Drawing"/>
</namespaces>
</pages>
<httpHandlers>
<remove verb="*" path="*.asmx"/>
<add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add verb="GET,HEAD" path="ScriptResource.axd" validate="false" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
</httpHandlers>
<httpModules>
<add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
</httpModules>
<identity impersonate="true"/>
<trace enabled="false" requestLimit="10" pageOutput="false" traceMode="SortByTime" localOnly="true"/>
<!-- SESSION STATE SETTINGS
mode="Off|InProc|StateServer|SqlServer"
By default ASP.NET uses cookies to identify which requests belong to a particular session.
If cookies are not available, a session can be tracked by adding a session identifier to the URL.
To disable cookies, set sessionState cookieless="true".
-->
<sessionState mode="InProc" stateConnectionString="tcpip=127.0.0.1:42424" sqlConnectionString="data source=127.0.0.1;user id=sa;password=" cookieless="false" timeout="20"/>
<!-- GLOBALIZATION
This section sets the globalization settings of the application.
-->
<xhtmlConformance mode="Legacy"/>
</system.web>
<location path="Pages">
<system.web>
<xhtmlConformance mode="Transitional"></xhtmlConformance>
</system.web>
</location>
<system.codedom>
<compilers>
<compiler language="c#;cs;csharp" extension=".cs" type="Microsoft.CSharp.CSharpCodeProvider,System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" warningLevel="4">
<providerOption name="CompilerVersion" value="v3.5"/>
<providerOption name="WarnAsError" value="false"/>
</compiler>
<compiler language="vb;vbs;visualbasic;vbscript" extension=".vb" type="Microsoft.VisualBasic.VBCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" warningLevel="4">
<providerOption name="CompilerVersion" value="v3.5"/>
<providerOption name="OptionInfer" value="true"/>
<providerOption name="WarnAsError" value="false"/>
</compiler>
</compilers>
</system.codedom>
<system.webServer>
<validation validateIntegratedModeConfiguration="false"/>
<modules>
<remove name="ScriptModule"/>
<add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
</modules>
<handlers>
<remove name="WebServiceHandlerFactory-Integrated"/>
<remove name="ScriptHandlerFactory"/>
<remove name="ScriptHandlerFactoryAppServices"/>
<remove name="ScriptResource"/>
<add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add name="ScriptResource" verb="GET,HEAD" path="ScriptResource.axd" preCondition="integratedMode" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
</handlers>
</system.webServer>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="System.Web.Extensions" publicKeyToken="31bf3856ad364e35"/>
<bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/>
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.Extensions.Design" publicKeyToken="31bf3856ad364e35"/>
<bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/>
</dependentAssembly>
</assemblyBinding>
</runtime>
</configuration>
I am Getting the following error using the Numeric UpDown Control from Ajax Control Toolkit.
Assembly 'AjaxControlToolkit, Version=3.0.30512.20315, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e' contains a Web resource with name 'AjaxControlToolkit.NumericUpDown.NumericUpDownBehavior.debug.js', but does not contain an embedded resource with name 'AjaxControlToolkit.NumericUpDown.NumericUpDownBehavior.debug.js'.
I have web project and window project.Web project reference from window project and I want to debug from web project to source code in window project. Where do I setup to look for debug source code in window project.
I copied all source code from another computer. but on another computer can debug just fine.All that different is where the source file is located. so I think it should have some config in studio that tell where the source file is.
I am tring to use Jquery autocomplete into my asp.net 2.0 application, I have all necessary file in place, I tried to worked on , but it seems like this is not working,can some one tell me that is asp.net 2.0 application without using AJAX toolkit works with Jquery autocomplete or it does not work?Note: this is plain asp.net 2.0 web application, it is not using AJAX.
View 6 Repliesi have used ajax control toolkit masked editor extender.i want to remove "_" from masking pattern and want to replace it with space. for ex. want " - - " instead of this
<
asp:MaskedEditExtender
ID="MEETxbPhone"
TargetControlID="txbPhone"
Mask="999-999-9999"
[code]...
How i can create collapsible textbox with jquery or ajax control toolkit.
View 1 Repliesi found that for X & Y co-ordinates value of the Ajax toolkit dragPanel is very easily calculated from this article
Retain position of a DragPanel Extender after postback using ASP.NET AJAX
but i need to store the value in database and while page_load() i need to render the control as per the Co-ordinate values from the database .
From the above solution everything is fine except that i need to do it with code behind(from server side).
and i don't know a JavaScript a lot .
I'm using AJAX Control Toolkit HTMLEditor.
I have a sample Microsoft Word document which has several paragraphs.
When I click the button "Paste from MS Word (with cleanup)" on the Editor, <br/> is inserted as the HTML instead of <p></p> i.e. HTML paragraphs.
I would like the MS Word paragraphs to retain their meaning and have a <p> instead of <br />.
(By the way, they are kept if I do a standard Paste, but then a lot of other obscure characters are inserted into the HTML)
Can I use the latest AJAX Control Toolkit on a .net 2.0 project which will be deployed to a server with framework 2.0 only? If not, where can I download the latest AJAX Control Toolkit for framework 2.0?
View 4 RepliesBecause I have VS 2005, I need to download and install AJAX Toolkit version 1.0.20229, but I an't find it anywhere. Does anyone have a link I could use for this download?
View 2 RepliesAt present we are using <ajax:TabContainer> to load tabs. I have 5 user controls inside <ajax:TabPanel>.
The problem is that all the data on these 5 pages gets loaded at once and increases the loading time as well as it is very hard to debug. Can we do lazy loading uisng TabContainer control? so that only the data of the current tab is loaded and when we click on the other tab then that's control data gets loaded.
I am trying to use tab control with Ajax toolkit. I want to use my master page which is plain page and I want to show the tab function of gridview. I want to give the tab control only the gridview page partically on master page. If it is possible, I am going to put other gridview at this page. That means tab control ONLY gridview. Is it possible?
[Code]....
I am wondering if it is possible to create AJAX Toolkit control using JavaScript/JQuery or not. I know that I can create controls at server (at design or code-behind) and interact with its properties using JavaScript but I would rather want to initalize and create controls at client side using JavaScript/JQuery.
View 3 RepliesI have solution that has two projects in it. One is an ASP.net project and the other is a class library for the ASP.net project. I get this error but don't understand why or how to correct it.
Error 1
Metadata file 'C:UsersxDocumentsVisual Studio 2008ProjectsWeb AppsVet ClinicClassLibraryinDebugClassLibrary.dll' could not be found
Vet Clinic