Configuration :: Parse Error When Using Inherits?

Mar 24, 2011

I just uploaded files to my website and am getting a parser error when it comes to the Inherits word. If the exact error , you can look at [URL] the required dll is located at [URL] if it i got the web host godaddy sells. Also I thought it would be worth noting that if I remove the Inherits from the page there is no error.

View 1 Replies


Similar Messages:

C# - Source File Parse Error - Could Not Load Inherits Type File

Mar 10, 2011

How do I fix this error?

I'm running .NET Framework v4.0.30319 so the Framework shouldn't be an issue. I'm not using any DLL files or bin directories. How do I setup the IIS/Virtual Directory if I'm using Forms Authentication for the whole website using VS2010?

Description: An error occurred during the parsing of a resource required to service this request. review the following specific parse error details and modify your source file appropriately.

Parser Error Message: Could not load type 'ACAWebApplication.Pages.State_Carrier_Search'.

Source Error:

[code]....

[code]....

View 3 Replies

Configuration :: Project Build On Web Server / Parse Error : Could Not Load Type 'Namespace.PageName'

Mar 17, 2010

I have an ASP.NET 3.5 website application using C# and SQL 2005 running on a web server. Now the application has the ability to create new aspx pages with content and the relative aspx.cs and design.cs pages needed on the fly and store them in the base directory on the server. Think of it as a crued Visual Studio website on the server for admin to click a few options on a page then the new pages are created for them without the need of a web developer. This all works fine and the code is working 100% (for the moment).

My problem now is the following: When i now navigate to this newly created page i get the following error - Parse Error : Could not load type 'Namespace.PageName'

I've looked into the reasoning and microsoft say "These errors occur if the .aspx page contains a reference to a code-behind module and if the application has not been built." Which now makes sense the application does not realise that these new pages are part of its system even though i can navigate to them.How do i get the system to recognise these new pages and rebuild itself accordingly?Now i cannot rebuild the system localy then reupload to the server, this needs to be accomplished on the server by the system, because the site cannot afford to have down time everytime admin decide to add new pages.

View 3 Replies

Error About "Inherits" Attribute Even Though It's Correct?

Sep 23, 2010

Having a really strange issue at the moment with an ASP.NET site I'm currently building. At the moment, I'm writting the HTML and CSS for a page called Dashboard.aspx. But when I go to view the page in a browser, half the time it throws up this error: ASPNET: Make sure that the class defined in this code file matches the 'inherits' attribute, and that it extends the correct base class (e.g. Page or UserControl). I've checked the Inherits attribute on the .aspx page, and it matches the Partial Class held in the VB code of Dashboard.aspx.vb file.

When I refresh, it will always come up with this error. Then after a minute or two, it will load fine with no problems. I had a quick look on Google and I couldn't find an answer to this issue. I have also changed the name of the partial class (and the content placeholder on the .aspx file, thinking that may have caused a conflict) and nothing I do seems to fix it. Could anyone shed any light on what's going on?

View 1 Replies

Convert To Web Application Error - Could Not Parse Aspx File?

Oct 13, 2010

I occasionally get errors in my aspx files which are caused by problems with the designer file. When this happens I delete the designer file, right click on the aspx file and select "Convert to Web Application".

Usually regenerating the designer file works perfectly, however sometimes I get an error which simply says "Could not parse the file pathToFile.aspx". When this happens there are no useful errors displayed in the error panel which would indicate what the problem is. I got this error a little while ago, did some searching and found a blog which explains how to get round this problem. It suggests closing the file, cleaning the project, rebuilding then tring again. VS should now give you a more useful error message which pinpoints the problem. This has worked for me in the past, but doesn't work all the time.Has anyone found a better way of identifying the problem in the aspx file when the "Could not parse file" error is displayed?

View 1 Replies

Configuration :: When Access The Second Url, Got The Following Error.Description: An Error Occurred During The Processing Of A Configuration File Required To Service This Request

Mar 31, 2010

We have created a new cname for our subdomain website. The new website is working properly with cname. We do have .net application inside the webiste which is not working with cname. For eg,1. http://servername/_folder1/app/mypage.aspx (Accessing .net application (App) website without cname)2. http://NewDomian.xxxx/app/mypage.aspx (Accessing .net application (App) website with cname)The first case is working perfectly, but when I access the second url, I got the following error.Description:
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.Source Error:

[Code]....

View 3 Replies

Configuration :: Configuration Error / Unrecognized Configuration Section System.serviceModel?

Mar 10, 2010

I am getting this error on a website. does that mean the server is not competible with asp.net 3.5

Configuration Error
Description:An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.

Parser Error Message: Unrecognized configuration section system.serviceModel.

Source Error: [Code]....

Line 236: </assemblyBinding>Line 237: </runtime>Line 238: <system.serviceModel>Line 239: <serviceHostingEnvironment aspNetCompatibilityEnabled="true" />Line 240: </system.serviceModel>

Source File: D:Inetpubvhostsmuratmalli.comhttpdocsweb.config Line:
238

View 2 Replies

Web Forms :: MasterPage Inherits?

Dec 1, 2010

I had a problem with my website caused by using a masterpage built with a previous version of Visual Web Developer. So I created a new masterpage and renamed it to the same as the old one. It works locally but when I upload onto the host site I get the following error message: error ASPNET: Make sure that the class defined in this code file matches the 'inherits' attribute, and that it extends the correct base class (e.g. Page or UserControl).How do I get it to also work on the host site?

View 3 Replies

Configuration :: Error Occurred Loading Configuration File - Failed To Map Path

Mar 1, 2010

An exception of type 'System.Configuration.ConfigurationErrorsException' occurred in System.Configuration.dll but was not handled in user code

Additional information: An error occurred loading a configuration file: Failed to map the path '/'.

It started when i installed silverlight 3.0 Is there any fix for this. im getting error in this code:

rootWebConfig = WebConfigurationManager.OpenWebConfiguration("~/");

Configuration

View 5 Replies

Configuration :: Error Occurred Creating The Configuration Section Handler?

Jun 4, 2010

Excuse me this common error. I´ve found a lot of info in Google but I´ve not found my error. I´m trying to read some data from a custom section in web.config and I don´t know which is my error?

[Code].....

View 1 Replies

Configuration :: Web.config Deploy Time Configuration Error Assemblies

Jun 4, 2010

I built my ASP.NET website using vs2008 professional.

Now I have purchased vs2010 professional edition.

I do format my computer and then installed vs2010.

Now I want to deploy my website in vs2010, but it is giving configuration error in <add assemblies...

Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.

Parser Error Message: Could not load file or assembly 'System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'

View 2 Replies

Web Forms :: Multiple Pages With The Same Inherits Value?

Oct 7, 2010

This maybe bad practice but it's the way things are currently done here. We have a template .aspx file and when someone creates a new page they take a copy of this page and rename it and it's .vb counterpart, as well as changing the CodeFile attribute in the .aspx page. What doesn't change is the Inherits attribute, this is always 'template_file'. Recently I had an issue where I uploaded a new web.config you out testing server and all the pages started erroring, I can't remember the exact error but it was because all the pages had the same Inherits value. I changed all the pages so they had unique Inherits values and all was good again.

View 5 Replies

Configuration :: Report Viewer Configuration Error - Changes In Web Config

Jan 26, 2011

I keep getting the all-too-familiar Report Viewer Configuration error, even after double-checking changes in web.config.It worked fine yesterday morning. Then by late afternoon, after I uploaded some site changes, it reverted to throwing the error.Report Viewer Configuration Error
The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0

View 1 Replies

Configuration :: Configuration Error In Web.config [when Uploading To Hosting]?

Nov 2, 2010

when developing in my pc , all is fine , but when upload to hosting , it show error ~

[img]http://image.love9cube.net/images/sadsadcgc.jpg[/img]

View 2 Replies

How A Web Form Automatically Inherits System.Web.UI.Page

Apr 9, 2010

I wants to know, How a web form automatically inherits System.Web.UI.Page when creating a new webform.

View 2 Replies

How To Create A Custom Class That Inherits From System

Apr 22, 2010

I wanted to create a custom class that inherits from System.Exception and adds a few properties and methods specific to the project.

The issue I'm seeing is that a standard try/catch block catches generic Exception class and the compiler thinks that converting that to my custom class is OK. However, at runtime if the actual error is something else like a a System.Net.WebException for instance, then at runtime it will not convert to my custom class. Then my own error catch throws an InvalidCastException.

Obviously the one thing I don't want to happen is to have my error logging methods throw errors on their own...

So, how can I convert ANY exception to something that my custom class can use?

Here's a code example:

Csharp Code:

[code]....

Now, this code builds just fine... VS2008 and VS2010 have no issue with converting an "Exception" to "MyErrorClass", but at runtime it certainly doesn't like converting a "WebException" to "MyErrorClass"...

View 9 Replies

Web Forms :: ASPX Page Inherits From Two Classes?

Sep 14, 2010

i have found the following code in one of the web applications. Is it possible to have an aspx page inherits from two different classes?

<%@ page language="C#" masterpagefile="~/email/EmailMasterPage.master" inherits="email_PassReset, App_Web_klsfx623" stylesheettheme="email" %>

i dont see any class declared for App_Web_klsfx623 in the code behind. dont know what is this?

View 2 Replies

AJAX :: Type: 'DataSetConverter' Does Not Inherits From JavaScriptConverter?

Mar 9, 2010

<asp:ScriptManager ID="ScriptManager1" EnablePageMethods="true" runat="server">

View 1 Replies

Mvc Views With CLR Generics Syntax In Inherits Attribute?

Oct 18, 2010

For reasons I won't go into I need to use CLR generics syntax in an ASP.NET MVC view.

I.E. NOT this:

System.Web.Mvc.ViewUserControl<someobject>

but this:

System.Web.Mvc.ViewUserControl`1[[someobject]]

When I run the application I get

Parser Error: could not load type `System.Web.Mvc.ViewUserControl`1[[someobject]]

View 2 Replies

Configuration :: Configuration Error In Event Viewer

Jun 15, 2010

Sometimes my website falls and when I check the Event Viewer I see the next error: Event message: A configuration error has occurred. Exception type: ConfigurationErrorsException Exception message: An error occurred creating the configuration section handler for ClientConfig: Item has already been added. Key in dictionary: 'category' Key being added: 'category. But I'm sure it appears only once.

View 3 Replies

Configuration :: Error Handling - Crendentials To Send Email When Server Error Occurs?

Nov 14, 2010

When a server error occurs for whatever reasons (YSOD), the server will send a message via SMTP class. In my case, my company employs microsoft exchange and uses NTLM authentication for all domain users. I am authenticating users via NTLA windows integrated authentication. My question is, is it possible to utilize this authentication data, and pass it to the system.web SMTP username/password authentication scheme to send an email to me (the web developer) when the error occurs? I am pretty sure my company requires a username/pwd to send emails via SMPT on the ms exchange server.

View 1 Replies

Configuration :: Error With Writing To DB On Web Server. A Network-related Or Instance-specific Error

May 25, 2010

I am REALLY stuck with this and need a solution in the next 24 hours .i I have uploaded my asp.net web application to the web and have the database and connection strings functioning and reading the data from the database. But when I try to write to the DB

I get the following error :

Server Error in '/' Application.

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.

(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that
SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

The wierd thing about this is the connection strings work from the local machine when I run from Visual Studio and I can write to the DB there, I just cannot write to the DB from the URL.

I am pretty new to asp.net but I am sure it has to be something to do with the web.config.

View 5 Replies

Configuration :: Request Time Out Error And Maximum Length Exceeded Error

Aug 12, 2010

I am trying to Upload data from Excel file. Transfer data from Excel file to XML file and passed it to Store procedure. And insert the record into database.I also set the timeout for command to zero. when i upload 1 to 500 rows its working fine and when I upload the 10000 rows than its takes time but upload all the users successfully at localhost. But when I upload the code to remote srever,than its only upload upto 300 or 400 rows.After uploading these users it will gives the error of Request Time Out . Even more if I tried to upload 50000 rows its give me the error of 'Maximum Length Exceeded'. Can anyone tell me what the maximum size of Excel sheet to upload the users. How I can get rid of the Request Time Out Issue. How I can Increase the server response time.

View 4 Replies

Visual Studio :: Browsing The Website Error - An Error Occurred During The Processing Of A Configuration File

Jun 9, 2010

I have a website on visual studio 2008 on my local machine. When I run through the debugger I get the following error, however when I browse the same website through the IIS manager (running IIS7.5), I can browse it. What do I need to fix to run it through debugger? The website is set as an application.

Error:

Configuration Error

Description:

An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.

[Code]....

View 2 Replies

Configuration :: Getting An Error "Parser Error Message: Could Not Load File Or Assembly 'System.Web, Version=4.0?

Aug 25, 2010

I have created an application which runs fine in VS2010.Now i am trying to host that application using inetmgr.When i try to browse the page from inetmgr content view then i get the "Parser Error Message: Could not load file or assembly 'System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified".If i browse the page from VS i am able to do it.I am not able to host the app. may be the reason is the above stated error.

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved