The project converts fine, but I'm getting this error and i've done both. Project worked fine in 1.1. Anywhere else I can look?
Session state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. make sure that System.Web.SessionStateModule or a custom session state module is included in the <configuration><system.web><httpModules> section in the application configuration.
I would like to understand if it is possible to convert a windows application project written in vb.net into an ASP.net website. I'm editing the code of a project, and I want to integrate the code into my WEBSITE written in vb.net I have a solution which when I open, it contains a class library and a windows application. There are only 3 files viewable under each of two folders. The folder Charlotte with Myproject, Assemblyinfo.vb and Charlotte.vb and the folder TestCharlotte with Myproject, AssemblyInfo.vb and frmTest.vb. How do I go about taking this thing and integrating the pages into my website application? WHen I look in the folders on my hard drive, I can see other things including a bin folder and an object folder.
View 4 RepliesI have finished a project in VB/asp.net and would like to know if there's some way to convert a project to a web control (ascx)?
View 2 RepliesIs there a fast way to convert an entire VB.Net project to C# .Net?
View 2 RepliesHow to convert full C# project to vb.net ?
View 2 RepliesI need to migrate a ASP.NET application from 1.1 to 3.5. I have gone through the answers on this forum already, but still have some questions
should I convert the application from 1.1 to 3.5 directly? OR convert it to 2.0 first and then to 3.5 and the reasons for doing so.Is there any article that walks through the whole conversion process from 1.1 to 3.5 with solutions for any typical issues encountered during the conversion process?Is it possible to convert a ASP.NET 1.1 project to ASP.NET 2.0 using VS2008 OR do I need to use VS2005 IDE for doing so?
How convert a project created in asp.net MVC to Asp.Net MVC Razor?
View 2 RepliesI created a ASP.NET project which calls a DAL class I wrote, to retrieve data to display on the page, most of the heavy lifting is in the DAL class. As you can see, it pretty straightforward, although I do have some minor validation code in my aspx page. how can I convert this project into a MVC pattern?
View 2 RepliesI have a project made in visual c#, how can i convert it to vb.net.
Onlly page by page or exist another way ?
I am working with globalization project to convert website into french.In ProductData.cs page I have function called GetProductDetails as below.
public static Product GetProductDetails(int productId)
{
Product product = null; [code]...
All this work fine when CountryCode is 'US' and language culture is 'en-US'.But when I change to language culture to 'fr-FR' through internet explorer it shows error in ProductDetails.cs page that ''object instance not set to reference"
DataAccess.cs used in above code is as follow.
public static product GetProducgDetails(int productId)
{
Product product = ProductData.GetProductDetails(productId);
return product;
}
.How can I remove error I am getting in Productdetails.cs page
My website uses a single project solution. Each web page file consists of C# code along with the markup. I now have to separate the code from each page into code-behind files that must be combined with many different versions of the markup. I assume this means that I will need a solution with a common project of code-behind files that is merged with a project of each version of the markup files in order to create different websites. I need to know how to organize the solution for debugging and building each website and where to place each file.
View 1 RepliesI have three folders , which original is build by vistual 2003 , recent ly I install vistuall 2005 on Win 7 and succesful covert one folder from vistual 2003 t0 2005 ( I forget how , I am new on win 7) , when I deat with my second folder I always get Test2( unviable) under the Solution Exporer ( vistual 2005) But I can access this folder by brows( when I try http://localhost/test2/) I get all the files under this folder , why I can see them on my vistual studio 2005???
View 6 RepliesI have a Visual Studio 2003 web service project that I have to upgrade to Visual Studio 2008. After I have run the conversion wizard, I get this message: You have completed the first step in converting your Visual Studio .NET 2003 web project. To complete the conversion, please select your projectin the Solution Explorer and choose the 'Convert to Web Application'context menu item.I got this message with another project, which was originally a "web site", rather than an ASP.NET "web application". It made sense to in that case (sort of). Why, however, would I not just want to have this project remain a web service project?Additionally, when I follow the instructions and select "Convert to Web Application" from the context menu, I don't get any feedback that anything has changed. Should it have?
View 1 RepliesWhen I turn on Code Coverage in my test settings, on a project that references the Unity DI container I get the following error:
Cannot initialize the ASP.NET project'{Project Name}'.
The event log specifies the following reason:
Could not load file or assembly 'Microsoft.Practices.Unity, Version=2.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. Strong name signature could not be verified.
I have a project that I developed in VS2005 and that has been put into VSS. I am trying to "get" it on a new machine and convert it to VS2008 because that is what is installed on the new machine. I am having problems with it that I think originate in its working folder. So my basic question is, when you try to work with a solution that's in VSS should you maintain the same folder structure that it had when it was originally checked in? I'm not particularly happy with its original structure because it goes on and on seven levels deep, and I wanted to just cut it down to C:ProjectsResNew, but if that's what it takes to get it to work, I'll do it.
View 10 RepliesI have downloaded a project from the internet called the SMS Source example. I wanted to open this project in VS2010, so a conversion wizard has popped up prompting for the conversion. But it has errors in converting.
Error msg:
Conversion Report - SMSSend.csproj:
Error converting project file. MSB0001: Internal MSBuild Error: Missing resource 'MissingAttribute'
On the Timelog page, I want to put 2 dropdown list: 1 Manufacturing Project, 1 Engineer Project. However, users can choose either Manufacturing project dropdown or Engineer project dropdown (not both).
View 4 RepliesI'm trying create unit testing for an existing website project (not web application project). I cannot access my under test classes unless I use accessor. However, if I use accessor, I have problem to initiate an object with passing arguments. I only want to create unit tetsing for App_Code. After searching web, and I found that I'd better to create a web application project using my current existing website project. From solution explorer, add new project ->using existing website. My questions is: what impact will have for my current website to create the new project? Should I just convert my current website to web application? If do that, will it cuase problems on my website? I am new on asp.net, still learning..
View 1 RepliesWe are upgrading .Net 2.0 Framework Web service project to .Net 3.5 Project. We are not changing any methods. Will there be any change in the proxy because of this Framework Upgrade.My requirement is to all the existing clients consuming this webservice should not have any impact due to this framework upgrade.
View 1 RepliesApproximate cost of the project Duration of the project ( There are 2 Developers ) Can I charge the client for software license ( like Visual Studio license since I have purchased it by paying a hefty amount)
My profile as a developer is as follows:
I am a C#, .net, ASP.net developer with 3 years experience in enterprise class web and desktop projects. I can work 20 hours a week
The brief requirements of the project are as follows::
I have to develop an Ecommerce website. The website is meant for buyers, sellers, advertisers and bidders ( I would say it is Business to Business and also Business to Customer site ) The HTML's will be given by the client. The website will have all the features of any Ecommerce site like buying products, selling them, searching products, sorting them,etc The website should conform to W3C standards
I just converted an ASP.NET Web Site Project to a Web Application Project in VS 2010. After I run the application though it seems that my class polymorphism broke. I don't have a clue as to why this could occur.
So in the following code when I call base.OnLoad(e) I am getting errors in the base class because the variable myString is null. In fact all the variables for the Base class are null. I can do
[code]....
Let's say I have a Visual Studio solution with a Web project, a BLL project, and a DAL project. I'm trying to follow the repository pattern keeping my SQL code in the DAL with an interface that is referenced by the BLL.
I have a handful of common solutions for things such as error handling, usage logging, and other things that can be considered utility functions (i.e. not in the business spec). I'm keeping these in a Common project.
Here are a few ideas I've had with regards to structuring the Common project...
Bundle SQL with logic in a given class
Create a layered solution within the Common project
Discard the Common project and put utility functions in with BLL/DAL
Is one of these ideas better/worse than the other? Does anyone have a better solution?
It's worth noting that these utility functions will be reused in a variety of other applications.
Taken from http://msdn.microsoft.com/en-us/library/dd410597(VS.100).aspx ...
If you are using the Standard or Express editions of Visual Studio, the Create Unit Test Project dialog box is not displayed. Instead, the new MVC application project is generated without a test project.
I have created 2 projects in a solution. One project contains Asp.net classes with login page and different other pages.
Another project contains a web service.
When I launch the solution(click F6 in visual studio 2008) the login page can access to the method of the webservice. Both projects are launched.
However when i added this 2 projects into IIS and deploy them (with create command) the login page cannot contact the method of the web service. Even though the web service is running because i can acces it manually. But they cannot communicate each other.
I recently updated my VS2010 website project from .NET 3.5 to 4.0. Everything was working fine in the website project. Today I decided to migrate the website to a web application project as I have learned this is the best way to work in .NET. I split out all my class files into a separate class library and copied all my other content into my new project. Then I updated all the references and web.config.
When I build the class library, everything works great. The problem is happening when I try to build/debug the web application project. It is acting like all the controls are missing and it is also throwing a bunch of compile errors about the public properties I have in my master pages.
Control errors: "The name 'INSERT CONTROL NAME HERE' does not exist in the current context"
Master page errors:'System.Web.UI.MasterPage' does not contain a definition....
It is giving these errors for every single control and master page property in my entire solution.I notice when I add a new web.form to this project, it also adds a filename.aspx.designer.cs file in addition to the .aspx and .aspx.cs file. My existing files do not have these extra files since they were created in a different .NET version.
UPDATE: It seems I was missing the step where I need to right click on the new application folder and select "Convert to web application". I just did that and it seems to be a little bit better...
Now it is choking on Literals that are inside single quotes:
<div class='<asp:Literal ID="CssClassLiteral" runat="server"></asp:Literal>'>
It doesn't see this literal when it does the conversion... Is the above valid code or should I implement that functionality another way?