Convert A Asp 1.1 Project To Asp 2.0 Using VS2008

Jul 29, 2010

I need to migrate a ASP.NET application from 1.1 to 3.5. I have gone through the answers on this forum already, but still have some questions

should I convert the application from 1.1 to 3.5 directly? OR convert it to 2.0 first and then to 3.5 and the reasons for doing so.Is there any article that walks through the whole conversion process from 1.1 to 3.5 with solutions for any typical issues encountered during the conversion process?Is it possible to convert a ASP.NET 1.1 project to ASP.NET 2.0 using VS2008 OR do I need to use VS2005 IDE for doing so?

View 3 Replies


Similar Messages:

C# - Using Embedded File In VS2008 Project?

Aug 19, 2010

I have an ASP.NET project and want to include an XML file inside the project to store some relatively static data. To do this I selected "Add File" from the solution context menu and picked my XML file. Having added this to my project, I then wanted to load the XML from within code. I tried the following:

XmlDocument xmlDoc = new XmlDocument();
xmlDoc.Load("MyData.xml");

I also tried:

XmlDocument xmlDoc = new XmlDocument();
xmlDoc.Load("~/MyData.xml");

But it seems to be looking in the current directory (i.e. my VS2008 directory) and not the project. Am I going about this wrongly? Is there a way to simply reference a resource that's embedded in the project like this?

View 2 Replies

Web Forms :: Uplaod Photo In VS2008 Project?

Jan 10, 2011

I need to uplaod photo in my VS2008 project. Can I use FileUpload control or link button is the better option. Also, how to do the upload using both controls.

View 13 Replies

Installation :: Set Project To.NET 3.5 Version - Using VS2008 Under WINXP?

Apr 23, 2010

I am using VS2008 under WINXP, I have a project which the ASP.NET version is set to 3.5.

The code: Response.Write(System.Environment.Version.ToString) prints out 2.0.50727.3603

After checking in http://en.wikipedia.org/wiki/List_of_.NET_Framework_versions I found out that the ASP.NET version is 2.0 SP2.

How can I set my project to ASP.NET 3.5 ?

View 9 Replies

Configuration :: Difference Between Web Site Deployment And Web Project In VS2008?

Jun 7, 2010

Is there a difference between the Web Setup Project in VS2008 and the Web Deployment Project that I keep reading about on this site? More importantly, how much of a help is the deployment project over just using the setup project?

View 1 Replies

Visual Studio :: Upgrade Vs2005 Web Application Project To Vs2008

Jan 20, 2011

I have a vs2005 web application project,I upgraded my machine from xp to Windows 7, the web application project not working in vs2005 anymore, does anybody know why windows 7 not support web application project for vs2005? if i upgrade vs2005 web application project to vs2008, will that work in windows 7? and after upgrade, will the original web application project still a web application project or it upgrade to website project?

View 3 Replies

Visual Studio :: Concerns In Converting VS2008 Project To VS2010?

Nov 3, 2010

I have been working on this project for a few months in VS2008.. now that we are getting closer to the end, one of the other programmers has been working and doing his in VS2010, so when i try to open his projects in VS2008 it just shows up as XML.. so i have to open in VS2010.. thats fine..

But if i try to open my project in 2010, it prompts to use the conversion wizard.. Should i be concerned or are there any issues with doing the conversion? Being the end of the project, i dont want to cause issues at this point.. So would like to know if converting the project file at this stage in our project a good idea? Will there be any issues using his code with mine since they were developed in 2 different versions..

View 1 Replies

Databases :: Vs2008 Website Project Cannot Add Reference To Oracle.DataAccess.dll

Feb 28, 2011

I have a vs2008 Website project(it was converted from vs2005), when i right click the Website node in the solution and open the property page, i select the references link, then click add reference to Oracle.DataAccess.dll(11g, 64bits), Version=2.112.2.0 in the website BIN directory, it doesn't work, i don't see the Oracle.DataAccess.dll is added, Can you give me any advice why the website project can not add the Oracle.DataAccess.dll ? And I can add rOracle.DataAccess.dll to my other Web Application project, what difference between Website project and Web applicatoin project caused the issue? Since i can not add the Oracle.DataAccess.dll , when i compile, it gave the error:

Could not load file or assembly 'Oracle.DataAccess, Version=2.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. An attempt was made to load a program with an incorrect format.

View 4 Replies

Visual Studio :: VS2008 - F5 Starts Web Browser But Project Does Not Open In Debug?

Nov 29, 2010

F5 builds the web project and the opens the web site but the project is not in debug.

This has happened over the last week but I was not aware of making any relavent configuration changes or updates.

View 2 Replies

Visual Studio :: Convert Vs2003 To Vs2008 Error - Unable To Open The Web Site?

Jan 12, 2011

I got this error while converting

Unable to open the Web site 'http://localhost/America/Tranxfer3.4/TxfReport/TxfReport.vbproj'.

The Web site 'http://localhost/America/Tranxfer3.4/TxfReport/TxfReport.vbproj' does not exist.

if you know anyother suggestions for converting vs2003 to vs2008 project

View 1 Replies

Visual Studio 2008 - How To Manually Override The IIS Directory For An .Net Project Opened By VS2008 But Created On Another Machine

Feb 25, 2011

I have an ASP.Net project created by a team member on another computer. The project references a virtual directory that exists on my computer but under a different localhost location.Currently, the following error occurs when I try to open the project:

The local IIS URL http://localhost/foo/default.aspx specified for Web project foobar has not been configured. In order to open this project the virtual directory needs to be configured. Would you like to create the virtual directory now?[Yes] [No]

So, there are two options: select yes: It creates the virtual directory that it thinks I need, which I don't want to do. I already have a virtual directory somewhere else.

select no: This isn't an option, as the project opens, but without all the bells and whistles I know and love.


Where is the virtual directory location (in my case http://localhost/foo/default.aspx) specified within the project? Can I change this manually, say in a configuration file within the project, either before or after I open it? A configuration change seems more ideal than manually opening IIS to override a virtual directory path.

EDIT (solution): Buried in the comments below is the following answer (Thanks @Thyamine)This can be configured in the foo.csproj file for the project. Look for the lines:

<ProjectExtensions>
<VisualStudio>
<FlavorProperties GUID="{F00-000-000}"> [code]....

View 1 Replies

Web Forms :: Using C# Classes Vb Classes Together In VS2008 / 3.5 Project

Mar 24, 2010

Can I use VB and C# classes together in the same asp.net 3.5 project?

View 3 Replies

Convert Project From 1.1 To 3.5?

Apr 19, 2010

The project converts fine, but I'm getting this error and i've done both. Project worked fine in 1.1. Anywhere else I can look?

Session state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. make sure that System.Web.SessionStateModule or a custom session state module is included in the <configuration><system.web><httpModules> section in the application configuration.

View 3 Replies

Convert Project To Website?

Jul 4, 2010

I would like to understand if it is possible to convert a windows application project written in vb.net into an ASP.net website. I'm editing the code of a project, and I want to integrate the code into my WEBSITE written in vb.net I have a solution which when I open, it contains a class library and a windows application. There are only 3 files viewable under each of two folders. The folder Charlotte with Myproject, Assemblyinfo.vb and Charlotte.vb and the folder TestCharlotte with Myproject, AssemblyInfo.vb and frmTest.vb. How do I go about taking this thing and integrating the pages into my website application? WHen I look in the folders on my hard drive, I can see other things including a bin folder and an object folder.

View 4 Replies

Convert A Project To Web Control?

Jan 17, 2011

I have finished a project in VB/asp.net and would like to know if there's some way to convert a project to a web control (ascx)?

View 2 Replies

Convert Entire VB.Net Project To C# .Net?

Feb 6, 2010

Is there a fast way to convert an entire VB.Net project to C# .Net?

View 2 Replies

Convert Full C# Project To Vb.net?

Dec 30, 2010

How to convert full C# project to vb.net ?

View 2 Replies

MVC :: How To Convert Project Created To Razor

Mar 15, 2011

How convert a project created in asp.net MVC to Asp.Net MVC Razor?

View 2 Replies

Convert An Existing Project Into MVC Pattern?

Jan 4, 2010

I created a ASP.NET project which calls a DAL class I wrote, to retrieve data to display on the page, most of the heavy lifting is in the DAL class. As you can see, it pretty straightforward, although I do have some minor validation code in my aspx page. how can I convert this project into a MVC pattern?

View 2 Replies

Web Forms :: Convert A All Project Made In Visual C# To Vb.net?

Apr 13, 2010

I have a project made in visual c#, how can i convert it to vb.net.

Onlly page by page or exist another way ?

View 6 Replies

Globalization Project To Convert Website Into French?

Jul 23, 2010

I am working with globalization project to convert website into french.In ProductData.cs page I have function called GetProductDetails as below.

public static Product GetProductDetails(int productId)
{
Product product = null; [code]...

All this work fine when CountryCode is 'US' and language culture is 'en-US'.But when I change to language culture to 'fr-FR' through internet explorer it shows error in ProductDetails.cs page that ''object instance not set to reference"

DataAccess.cs used in above code is as follow.

public static product GetProducgDetails(int productId)
{
Product product = ProductData.GetProductDetails(productId);
return product;
}

.How can I remove error I am getting in Productdetails.cs page

View 6 Replies

Visual Studio :: Convert Single Project Website Into Using Multiple?

Jan 9, 2011

My website uses a single project solution. Each web page file consists of C# code along with the markup. I now have to separate the code from each page into code-behind files that must be combined with many different versions of the markup. I assume this means that I will need a solution with a common project of code-behind files that is merged with a project of each version of the markup files in order to create different websites. I need to know how to organize the solution for debugging and building each website and where to place each file.

View 1 Replies

Visual Studio :: Convert 2003 Project - Get Solution Is Unavailable?

Sep 13, 2010

I have three folders , which original is build by vistual 2003 , recent ly I install vistuall 2005 on Win 7 and succesful covert one folder from vistual 2003 t0 2005 ( I forget how , I am new on win 7) , when I deat with my second folder I always get Test2( unviable) under the Solution Exporer ( vistual 2005) But I can access this folder by brows( when I try http://localhost/test2/) I get all the files under this folder , why I can see them on my vistual studio 2005???

View 6 Replies

Upgrading Visual Studio Web Service Project Says To "convert To Web Application."?

May 4, 2010

I have a Visual Studio 2003 web service project that I have to upgrade to Visual Studio 2008. After I have run the conversion wizard, I get this message: You have completed the first step in converting your Visual Studio .NET 2003 web project. To complete the conversion, please select your projectin the Solution Explorer and choose the 'Convert to Web Application'context menu item.I got this message with another project, which was originally a "web site", rather than an ASP.NET "web application". It made sense to in that case (sort of). Why, however, would I not just want to have this project remain a web service project?Additionally, when I follow the instructions and select "Convert to Web Application" from the context menu, I don't get any feedback that anything has changed. Should it have?

View 1 Replies

How To Get Code Coverage Working On A VS 2010 Project/Cannot Initialize The Project 'Project Name'

May 23, 2010

When I turn on Code Coverage in my test settings, on a project that references the Unity DI container I get the following error:

Cannot initialize the ASP.NET project'{Project Name}'.

The event log specifies the following reason:

Could not load file or assembly 'Microsoft.Practices.Unity, Version=2.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. Strong name signature could not be verified.

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved