I want put custom error page in my website so I wrote below code in web.config
<httpErrors errorMode="Custom">
<remove statusCode="404" subStatusCode="-1" />
<error statusCode="404" subStatusCode="-1" prefixLanguageFilePath="" path="error-404.aspx" responseMode="ExecuteURL" />
</httpErrors>
is it correct?
or I should put other code?
Here's my Application_OnError event sink in global.asax.vb:
Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Dim fourOhThree As Integer = DirectCast(HttpStatusCode.Forbidden, Integer)
Throw New HttpException(fourOhThree, innerMostException.Message, innerMostException)
End If
End Sub
You'll see that if we've got an innermost Exception of type AccessDeniedException we throw a new HTTPExcpetion with a status code of 403 AKA 'forbidden'
Here's the relevant web.config entry:
<customErrors defaultRedirect="~/Application/ServerError.aspx" mode="On">
<error statusCode="403" redirect="~/Secure/AccessDenied.aspx" />
</customErrors>
So what we're expecting is a redirect to the AccessDenied.aspx page. What we get is a redirect to the ServerError.aspx page.
We've also tried this:
Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Context.Response.StatusCode = DirectCast(HttpStatusCode.Forbidden, Integer)
End If
End Sub
Which unsuprisingly doesn't work either.
I am a more than a little confussled, my build succeeds with no errors but when I run without debugging only my error page shows up? I tried switching the custom errors to "Off" but it still shows up the error page.
View 5 Repliesif I am redirecting to an error page from global.asax file, can I get hold of the page in which the error had originally occurred?
View 3 RepliesI'm trying to set up custom errors for asp.net in webconfig/global.asax on Server 2003, IIS 6. Got it working find for .aspx pages but not for any htm or html pages. So I found the article describing how to open IIS manager, click configuration, copy path for .aspx extension and add one for .htm Did that.
Restarted website: Now I get the blank white page explaining there's a problem but not the 404 page not found
Restarted web services: same thing
I am using asp.net 3.5 web.config to limit access and it works great.
<authentication mode="Windows">
<authorization>
<allow users="Bill, John"/>
<deny users="*"/>
</authorization>
Unauthorized (but authenticated) users will be blocked by a system error message saying that:
Server Error in '/' Application Access is denied.
Description: An error occurred while Error message 401.2: Unauthorized: Logon failed due to server configuration.
In order to make the message more friendly, I uncomment the customErrors flag and create a GenericErrorPage.htm in the root path of my project.
<customErrors mode="On" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
However, it just doesn't work. I still get the system error message rather than my custom error page.
I have a C# web forms ASP.NET 4.0 web application that uses Routing for URLs for some reason custom errors defined in the system.web section of my web.config is entirely ignored and it will fall back the IIS errors.
This gets entirely ignored
[code]....
This would be a minor inconvenience except that by the fact it falls back to IIS native instead of my application it completely circumvents Elmah logging my 404 exceptions correctly.
I was wondering if someone could point me in the right direction:
How do I generate a custom error page with the error message and get it to mail me that error message?
Is there a good tutorial out there that someone could point me 2.
Hope this is the correct forum for this question. I am using VWD 2010 an have a web project and get the following error upon execution:
Parser Error Message: Unknown server tag 'custom:AjaxValidator'.
My code is as follows in the .cs file:
[Code]....
[Code]....
I have created a custom control from scratch and it works fine as in you can build the project that uses it and it works fine at runtime. Problem is when you go to design view the control shows an error in the place of where the control should be rendered.
Error: '<SomeValue>' Could not be set to '<SomeProperty>'
This shows up on all my custom set properties. These properties are created as basic as possible. I can give the properties values in Source view and run the app just fine. I can even add a Onclick event. If I don't set any custom properties the control will render fine in Design view. It's only when I set a value to a custom property.
Property Code Example:
[Code]....
I've even removed the Category and Description tags with no difference.
I don't know if what I said makes sens, but I hope it does.
I was referred here by MSDN forums hope this is the right place - I have a custom control (:WebControl) that renders web.sitemap in a specific way. While it runs error free and produces the expected result, at Design-Time it complains
[Code]....
and have tried the SiteMapDataProvider Tag with and without the SiteMapProvider
attribute.Does anybody have (a) any experience with this, or (b) any suggestions as to how to track down the problem?
To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
I got this error at time of running ma published website but only for 1page this error occurred how it can be solved.
I'm having a wicked time trying to redirect the different error scenarios to a custom error page. Basically, I have put some code in Application_Error in global.asax, and done the necessary web.config settings to use Custom Errors.
In global.asax on Application_Error, I stored the Server.GetLastError in Session. The reason I have to store it in Session is because (as far as I know) you lose the exception when using "ResponseRedirect". And the reason I have to use ResponseRedirect is because I am using an UpdatePanel with AJAX calls, and any exception during the AJAX call shows up as a JavaScript error, and doesn't get handled using the custom error page (see this post).
void Application_Error(object sender, EventArgs e){ ////must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { Session["LastException"] = Server.GetLastError(); } else { // (I think this happens when there are compile-time errors) Server.Transfer("~/Oops.aspx"); }}void Session_Start(object sender, EventArgs e){ //must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { //initialize the session (http://forums.asp.net/t/1405077.aspx) Session["LastException"] = ""; }}
I am trying to handle the unhandled exceptions in my project.I tried with this following code in my web.config filebut it is not at all redirecting to an error page which i have created instead of that it is throwing an exception in my code itselef. How to print the error description over therein my custom error page.
---------------------------------------------------------------------------------------------------
<sys.web>......<customErrors mode="On" defaultRedirect="~/Error.aspx"></customErrors>...</sys.web>
---------------------------------------------------------------------------------------------------
And even i tried in Global.asax page in Application_Error() method like below
Exception ex = Server.GetLastError();Response.Redirect("~/Error.aspx?errmsg="+ex.message);Server.ClearError();
And in my Error.aspx.cs page i have placed a label and i have written code like this
protected void Page_Load(object sender, EventArgs e) {
Label1.Text=Request["errmsg"];
}
But it is not getting redirected my error page and not displaying anything on it.
For certain parts of the site the allow inserting and updating of data we have some try / catch logic in place.. Now we would like to display a custom error page explaining what didnt happen. Instead of just a generic message that says error occurred. Here is 1 error that is generated due to Primary Key constraints, we woudl like to redirect them to our error.aspx page which is already setup and configured in the web.config but within that page display a more user friendly detail message of why they got the error. In the example below, we may want to say, "There was an error with the "Access Insert" please make sure that the values you entered on the previous page are unique" thats just an example, but gives an idea of what we are trying to do.
[Code]....
I am showing Custom Error in my page.if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page.I am attching the Screen shot.Can any body help me out how to show the Error page on entire page if something happend in any where submaster or other page.Here is the code that I am using in web config file to show custom Error page..
[CODE]...
Here I know the issue what's going on.This issue is occurring because i am using AJAX to partially load the contents of the tabs after the initial page load so the error is occurring AFTER my master page has been loaded.What I need to do is provide a javascript function to handle the error after the ajax call has returned and redirect to the error page.How to write this Javascript and where Do I need to write this?
I have developed .net web application. When i change the page name(Which is not exist) in URL, it throws following error msg. I could not redirect the error page for respected error no(401.2..) Through IIS Admin and web config. Could anybody give appropriate solution. It is urgent. Access is denied. Description:
An error occurred while accessing the resources required to serve this request. The server may not be configured for access to the requested URL. Error message 401.2.: You do not have permission to view this directory or page using the credentials you supplied. Version Information: Microsoft .NET Framework Version:1.1.4322.2470; ASP.NET Version:1.1.4322.2470
I have created a custom error page to redirect whenever any error occurs. I made the following changes to the web.config file
<customErrors mode="On">
<error statusCode="403" redirect="~/Error.aspx" />
<error statusCode="404" redirect="~/Error.aspx" />
</customErrors>
Suppose my url is in the following way: http://MyTestSite/Posts/Post1.aspx
If I remove the .aspx at the end manually then it is not displaying my customm error page instead it is dispalying default 404 error page : Page cannot be found.
Also, if I give http://MyTestSite/Posts the same 404 error message is displaying. Even the Application_Error event in global.aspx is unable to handle this error.
How can I redirect these type of cases to my custom error Page? Do I need to make any changes in IIS default errors or can I able to acheive only using web.config?
I've a got an Asp.Net site that is using Forms authentication, I've also got custom errors configured in the web.config. One of these is a special error page for 403's (access denied). My question is how do I get Forms authentication to work smarter?
I would like Forms authentication to send users to login page only if they are not authenticated. If they are I want it to defer to the custom error pages that i've defined in the web.config. This seems like something very basic, how can this be achieved?
[code]....
I want to create a custom control where I define several specifically named DIV sections. The code-behind logic of the custom control will perform operations on these named DIV sections. The page where the custom control is hosted needs to be able to add named controls to the DIV sections and perform operations on these named controls added to the DIV sections.
Let me explain a little further. In the custom control, I want to have code behind logic that fires the following Page Event and uses a condition to make one or another specifically named DIV section visible or not:
< _
ToolboxData("<{0}:BaseDetails runat=""server""></{0}:BaseDetails>") _
> _
Public Class BaseDetails
[code]...
how can I create a custom control which is able to generate the named DIV sections "DetailsNameDiv1" and "DetailsNameDiv2" where my custom control can check a condition and make one or the other visible. Also, I need to be able to add controls to these named DIV sections when I host the custom control and the control that I add to the named DIV section needs to let me set values of these controls from the code behind logic of the page (or usercontrol) where the custom control is being hosted (in my example, I am adding TextBox controls that I want to set the Text property from a SQL Data Reader).
I am trying to passing Exception info tpa custom error page that I have created, and I'm looking for the best way to do so.I ended up creating a session object on my Global.asax page, and I pass the error data to the session object during the Application_Error event, but it throws it's own exception prior to working.
[Code]....
I have also updated my web.config with my error page that I would like to pass session object data to:
[Code]....
I am trying out some code which enables me in creating a page with extension .asp2
The tags included will also be custom, something like:
[code]....
I have done the necessary changes so that ASP.NET identifies the extension. I have also kept a mapping of custom tags and asp.net/html tags with myself. With this I am able to render the page on browser. But how can we do event handling(usually done by page postbacks and code) in such a scenario?
[Code]....
Custom errors only working with file name
Being A C++ programmer this is fairly new to me - I am working on a formview and have been facing a problem- The issue is simple - I want to display a success page after I insert a row successfully and a custom error page if the insertion fails (due to datatype or format mismatch with table in database).
To achieve this I am doing as follows -
1. Defining a custom error page in ASP.NET configuration tool (webconfig)
>> This page never works if I enter an incorrect format in formview. It would rather display the ugly page with Server Error information (for example) -
The string was not recognized as a valid DateTime. There is a unknown word starting at index 0.
question - Why my default page is not getting displayed? Is it because I am testing from same development machine or is it because the error page doesnt work for "Server Error" pages?
2. In the "iteminserted" event I am redirecting it to Response.Redirect("~/newitemconfirm.aspx")
>> If I do this, irrespective of whether the row insertion was successful or not, this confirmation page always gets displayed! I want it to be displayed only on successful insertion.
I have a problem, its completely i dont why this happening.say i have site its workign most of places.but when i'm check some place its going to custom error pagei'm using url rewriting handler, is it may be?
View 1 Replies