DataSource Controls :: How To Merge Two Table Based On SQL Query
Jun 7, 2010
This is my table stucture...
This is first table...
ItemNo refno Process Name Qty
001 1 A John 50
001 2 A Jon 150
002 3 B
Kalis 100
003 4 A
Bob 300
Second Table
ItemNo Newrefno Process Name Qty
001 001 ZZ peter 50
001 001/a ZkZ Joe 70
002 002 Ab Ray 100
Result Set
001 A John 200 001/a ZZ ZkZ peter joe 50 70
002 B
Kalis 100 002 Ab Null Ray Null 100 Null
003 A
Bob 300 null null null null null null null
Here first row of the result set explanation:
up to this 001 A John 200 based on first table sum...
and 001/a zz ZkZ peter joe 50 70
here 001/a newrefno of 001 so i need to show all the ItemNo 001 record in one row like the above resultset.
I'm trying to update one my my tables from a field in another table.
I have Address fields on both tables and the old table has some addresses I need to copy over (I dont want to copy/paste or type them all in obviously). I basically need to:
This was asked during one of my interview.I was not able to answer could someone help me out to write a query for this With the above table.We should have a qry written so that it shows the following result
I am having a staff table which contain staff information on it. To search staff information from the table, I want to prefer filter style. For example in the select query I want to display staff information according to three criterias. Select staff information from all sections, Select staff information from a given section, select staff information by a given Name. All these selects must be performed in a single select statement. Suppose,
SELECT * FROM StaffDetailsTbl WHERE SectionID = CASE WHEN @SectionFilter IS NULL THEN [SELECT ALL] ELSE SectionID = @SectionFilter and Name = CASE WHEN @NameFilter IS NULL THEN [SELECT ALL] ELSE Name Like '%@NameFilter%'
Where Declared variables are parameterized stored procedure values retrieved from the user.
I have an application that populates a gridview based on criteria in a table. I have another table that holds data to be omitted. I will post the current LINQ code and also the end result SQL code that I need to figure out in LINQ. Below is my code:
Current LINQ Code: Dim TestType = (From test In db.Table _ Where test.TypeId = TypeID _ Select test.Id, test.Title)
I am developing a module for insert watermark in pdf file in asp.net with c# and I want to insert this module in existing application which is based on MVC architecture. I am new in mvc architecture. Can I merge asp.net based module in MVC based application.
I have a button click event that adds a record to a table based on the userid and threadid the user is viewing. I am a bit new to entity so I am stumbling around. I have to where conditions
ThreadID == threadid UserId == userIdPosts
I have this query but do not know how to execute it and if I have it as is I get this in the yellow screen of death Both the theadid and userIdPosts have data in them.
Line 90: // find is user has already tracked this thread. Line 91: var query = context.TrackLists.First(t => t.ThreadID == threadid); Line 92: context.TrackLists.First(t => t.UserId == userIdPosts);
<asp:sqldatasource id="SqlDataSourceX" runat="server" connectionstring="<%$ ConnectionStrings:MyConn%>" providername="System.Data.SqlClient" selectcommand="SELECT ItemNum, MIN(DateAdded) as [DateAdded] FROM Items WITH (NOLOCK) WHERE [DateAdded] between @DateFrom AND @DateTo
[Code]....
When I call select in codebehind, after 30sec it throws timeout expired SqlException:
[Code]....
again , this select took up to 3 sec to be executed. In application I tried to use SqlConnection and SqlTableAdapter instead of SqlDataSource, with the same query, and again it took up to 3 sec.
If I choose tighter interval (e.g '2011-01-20 00:00:00' - '2011-01-21 00:00:00') , there is no timeout exception, so I know that sqldatasource select is executed correctly. So the conclusion is that sql server is not using index while executing query sent from sqldatasource, but is using index whenever else. I have also checked the index statistics on sql server and it is like that. In profiler i can see slight difference between this two cases. As for SqlDataSource, in events table, in first column "EventClass" after 30 sec, there is this: "RPC:Completed" and application throws timeout. If i use SqlConnection and SqlTableAdapter then at the same place there is this: "SQL:BatchStarting" and "SQL:BatchCompleted" and application does not throws timeout(the index has been used).
what is so special on SqlDataSource connection, that Sql Server performs differently compared to other types of connections?
I have 2 Tables , OrderDetails and Requests In my LINQ to SQL dbml file. OrderDetailsID is a foreign key in Requests Table. I want to write the query to get the sum of UnitCost from OrderDetails based on OrderId. And If there is a row in Requests Table for each OrderDetailsID, and the Requests.Last.RequestType="Refund" I want to reduce the total refund amount from the main sum otherwise If there is no row based on OrderDetailsID, add to sum. Here is the way I implement that. I am looking to prevent using "For each".
iRefund = (From od1 In dc.OrderDetails _ Where od1.OrderID =1 _ Select od1.UnitCost).Sum Dim objOrderDetails = (From od1 In dc.OrderDetails _ Where od1.OrderID =1 _ Select od1) For Each OrderDetail As ORM.Entities.OrderDetail In objOrderDetails If Not OrderDetail.Requests Is Nothing Then IF OrderDetail.Requests.Last.RequestType="Refund" Then iRefund -= OrderDetail.UnitCost End If End If Next
I have a insert into statement thats inserting my numbers from a numeric text box on my aspx page. I am choosing the Amount Type then putting in a a number.
So i have a drop down that i select example Direct Charge then i enter 600.00 and click add it puts that in to the databse for me woot..
I then put in say Misc Credit and enter 200.00 it inserts in that into the database woot.
The look up table that has my amount types has a field called numeric opperator which is either + or - the Credit being a - and the Charge being a + then my stored procedure takes all my + numbers and adds them up and subtracts all the - numbers.
I want to change that so that it actuall be inserted into the table as a - number form the start. So I want choose Misc Credit enter 200.00 and click add then my event says o yea thats a credit insert 200.00 as -200.00
I am trying to update my table ARTICLES and it has a field COUNTER, Everytime a user enter this ARTICLES, the page_load event runs a LINQ to SQL query taking the QueryString as parameter, increasing the COUNTER field in 1.
I have a table that contains image data type and has more than 20,000 records.I want to change its file group to the new file group. I tried to change it using table designer, but everytime I wanted to save it, it occured an error with this message:
[Code]....
Does anyone know how to change file group using Alter Table query? I'm using SQL Server 2005.
I have tried to query a table with an xml column by using XQuery and I can't get the Select to work.
All my knowledge/understanding of the subject comes from this MSDN article:
[URL]
so I am probably overlooking something minor:
I tried this query Select col1, Phone.Query('element CellPhone {I am not sure about what goes here} I tried {data('Phone/cellPhone} from aTable Where Phone.Exist('/Phone/cellPhone/text()[contains.,"412-8977"]') = 1 This syntax is definitely not fun.
i posted a question yesterday but it got taken off by moderator mbanavige with the reason indicating it was a duplicate post. i know for sure it was the first time i was asking that question. i will have to ask it again NOW because it was deleted. hope THIS one does not duplicate the one i made yesterday. so here goes:
I need to query a products table based on categories selected by the user. The selection of the categories is a checkbox list, and user can select any number of categories (including none at all). I only know how to compare one parameter at a time. Like this:
I'm implementing a BLL layer and have a few questions. First, in my DAL, there is a contacts table, the select method is a sql query against a sql server 2000 database. The preview data returns everyting as expected. The query is
[Code]....
The BLL method is built like so
[Code]....
When using the BLL method to a gridview, the results of the subquery are not displayed. There are also other methods, each having a different where clause for ContactRole_ID and each is having the same issue of not displaying the subquery reult in the gridview. No error, but no data is displayed for the subquery either. Here is the templatefield of the gridview
[Code]....
Another item that is causing an error is in trying to update a record. Here is the DAL update method
[Code]....
And the BLL update method
[Code]....
The error says i have extra parameters, but have no clue where the extra parameters are being picked up. The error isObjectDataSource 'odsContacts' could not find a non-generic method 'UpdateContact' that has parameters: _ContactID, _Active, _ContactName, _Office, _VirtualOffice, _Pager, _Fax, _Home, _Cellular, _Email, _ContactRole_ID, Active, ContactRole_ID, ContactName, Office, Email, VirtualOffice, Pager, FAX, Home, Cellular.And the objectdatasource
