given below is the simple update string am using to update my database...
string q = "update register set fname='" + TextBox1.Text +
"',lname='" + TextBox2.Text +
"',gender='" + gender +
"',edu='" + TextBox3.Text +
"' where username='"+check +"'";
cmd.ExecuteNonQuery();
SqlCommand cmd =
new
SqlCommand(q, cn);
but it is not working...database is not getting updated...why?
I have the below code in my project..however its giving me an error on the update(bolded line)..please help me on this..
Private Sub ChangePassword1_ChangedPassword(ByVal sender As Object, ByVal e As System.EventArgs) Handles ChangePassword1.ChangedPassword
lblTempPassword.Text = ChangePassword1.NewPassword.ToString
CustomerName.Text = CType(Session("UserName"), String)
Dim FV1Updobjconn As Data.SqlClient.SqlConnection
FV1Updobjconn = New Data.SqlClient.SqlConnection()
FV1Updobjconn.ConnectionString = ConfigurationManager.ConnectionStrings("ASPNETDBconnectionString1").ConnectionString
FV1Updobjconn.Open()
Dim dtUpdating As New Data.DataTable()
Dim sqlUpdating As String = "UPDATE [SuperAdmin] SET [TempPasswd]= @SU2TempPasswd, [TempPwd]=@CU2TempPwd WHERE ([CustomerName] = [@CU2CustomerName])"
Dim cmdUpdating As New Data.SqlClient.SqlCommand(sqlUpdating, FV1Updobjconn)
cmdUpdating.Parameters.AddWithValue("@SU2UserId", UserIDValue.Text)
cmdUpdating.Parameters.AddWithValue("@SU2TempPasswd", lblTempPassword.Text)
cmdUpdating.Parameters.AddWithValue("@CU2TempPwd", False)
cmdUpdating.ExecuteNonQuery().... I get an error here saying..INVALID COLUMN "CU2CustomerName"
' Dim adUpdating As New Data.SqlClient.SqlDataAdapter(cmdUpdating)
' adUpdating.Fill(dtUpdating)
' Get the values needed to be passed on
' CtSUCompanyName.Text = dtUpdating.Rows(0)("CompanyName").ToString()
' CtSUCatPurch.Text = dtUpdating.Rows(0)("CategoriesPurchases").ToString()
FV1Updobjconn.Close()
End Sub
how would i do my Gridview delete command like a update command?
im using a datasource... and my delete command is like my update command... so i can change the status into "INACTIVE"...
DeleteCommand="UPDATE ACCOUNT_MAINTENANCE SET am_status = 'INACTIVE' WHERE (accmain_no = @accmain_no)"
UpdateCommand="UPDATE [ACCOUNT_MAINTENANCE] SET [account_type] = UPPER(@account_type), [min_deposit] = @min_deposit, [min_capital] = @min_capital WHERE [accmain_no] = @accmain_no"
when i press my delete command at gridview... the status changed into "INACTIVE" but when i refresh or press f5... it automatically update the status into "INACTIVE" also...
I have a detailsview which I am populating using a SQLDATASOURCE, which is bound to a table in a SQL db. Because the number of columns in the table will change, I am using SELECT * from [TABLENAME] to populate the view, this works fine.
My problem is that I need to also be able to update the table and I thought the best way was to generate the updatecommand in the code behind. This is no problem, code is as follows:
[Code]....
But the next stage is to create the relevant parameters for the update command. Does anybody have any thoughts on this? All of the information I have found for the updateParamater reference knowing the final value.
What I really need to do is the code behind equivalent of
<asp:Parameter Name="PARAMETERNAME" Type="Int32" />
Not sure whether this is possible.
Is it possible to perform an update command which performs addition using a value from a textbox? For example: User inputs a number into TextBox1 (I use regular expression validation to ensure this is an integer).
[Code]....
Basically if the user inputs 5 into TextBox1, I want the update command to subtract 5 from that user's ballance.
we have a AutoGenerateColumns-enabled WmxDataGrid in which we are able to update table rows in a DataBase connected with a SqlDataSource.
Each time we clear a field an empty string is written to the database where we want to write DBNull values.
At the moment we generate the update string via UPDATE... SET.. and the SQL Server function NULLIF(value, '').
Works proper but when I want to add the values to e.NewValues in BeginUpdate event I'm not able to read the values from the auto generated text boxes. How do I do that? Is there an easier way to automatically convert empty strings to NULL values?
I want to issue an INSERT command for an SQL Server table using DataAdapter without first issuing a SELECT command. Could anybody send me lines of code to handle this? Also how do i manage INSERT into selective table columns (I have 10 columns but i only want to update 2 of them)?
View 2 RepliesI am not sure if I am in the right spot here because this really doesn't have to do any datacontrol but hopefully somone can give me a hand with this.
Basically I have a bunch of TextBox controls on a page that are displaying the data I want but when I try to run an UPDATE query on the record I get nothing. The record values don't update and I don't appear to get any exceptions.....I am actually kinda really baffled on this one, here is what I have for the update code: [Code]....
Btw, if there is an easier way to do this with a control I am up for suggestions as I am just going off of some of my old VB6 ways
I have a sproc that updates data in the table but I'm having difilulties with one of the params that is of type datetime. In the sproc, a decision is made based on this date such as if the date is null/blank/emplty, update data, else delete data. I've tried things like
if(@Date_returned IS NOT NULL)
if(NOT @Date_returned = '')
if(@Date_returned = '')
if(@Date_returned > '01/01/0001')
but it always defaults to the "else" part where it deletes my data. The date is passed to the sproc from a .net calendar form object via a bll/dal and I can track the variable with its value. When I actually pick a date it has the date I've picked, otherwise it has a devault value of "01/01/0001 ....".
How should ckeck for this condition?
The users of my webapplication are validated using database connection. This requires each user is a sql server database user. While logging their validity is checking by trying to create a connection using userid and password entered by the user. If connection opens successfully, it is a valid user. I also have a page in application to change the password, where sp_password is used to updated database password.
string connectionString = ConfigurationManager.AppSettings["DBServerName"];
//try to create a new connection dynamically using user id and password
connectionString = connectionString + User ID=" + userId + ";Password=" + password;
using (SqlConnection connection = new SqlConnection(connectionString))
{
connection.Open();
}
The problem is after i change password, and logout and try to login, i am able to login using old passwd also. The line of code which creates and open connection succeeds with both old and new password. If i stop and run the application again this works.
Here is the "Update" method which is not updating.
It works if I remove "@original_UnitPrice" and "@original_OnHand" parameters from the "WHERE" clause.
[Code]....
I have a form that gets populated by LINQ and I want to be able to update the database using that same form. The form is populated by grabbing a querystring (for example, "edit=10") and searching the primary key for that record. So far so good. I have a button attached to the function below which is supposed to use LINQ to update the database with data from the form. I get no errors, but for some reason, it is only updating one field (Last_Updated) instead of all of them.
[Code]....
I am working with odbcCommand class, in one case I got error that QueryTimeout Expired. Even though this SP is taking only 3-4 secs in DB to execute these specific values, When I set the CommandTimeout=0, then it worked fine.
1)Is it necessary to always use this property while working with Command Class.
2)If it is not suggested to use, but still if I use it then how it will impact the performance.
Below is my code sample.
OdbcConnection conObj;
OdbcCommand cmdObj;
OdbcDataAdapter daObj = new OdbcDataAdapter();
public DataTable GetIFAContractNoteData(string RecipientIDIFACN, DateTime BatchDateIFACN, int TransmittalReportIDIFACN) {
conObj = new OdbcConnection(GlobalVariables.strDsnName + ";" + GlobalVariables.strDsnDataBase + ";" + GlobalVariables.strDsnUserID + ";" + GlobalVariables.strDsnPassword);
[code]....
Since I was not able to figure out my previous problem I decided to go ahead and make my own update statements and change the update command on a datasource I have. So I have a few textboxes and whatnot that allow you to change data and then click an update button. When I click that update button the page seems to refresh as if it was updating the record but the data in the boxes reverts back to what it was. I also created a ONUpdated sub and the label text change does not show.
View 4 RepliesI've recently started working in ASP.NET and RDBMS.I'm making a test form where I can do basic add,update,delete operations.I'm using OracleDataClient to do the DB operations.I was able to populate a listbox using OracleDataAdapter.
Now after clicking on update button,I intend to Update in DB.I've Dataadapter with it's update property.But the update query is not happening.The examples I saw over net all have Select command before Update.Is it actually like that or am I missing some point.
How does Oracle DataClient work with Insert,Update,Delete Commands.
I'm trying to update a date field to the system date but it's not working. Could someone please help with the syntax?
[Code]....
[code]...
This query works perfectly on the query analyser.
But when configuring the Table adapter ,I try executing the query and i get 0 rows affected.
What could I be getting wrong in this case.
NB:Existing GalleryID has been supplied.
I have a gridview. Every time i click on the Edit command, it caused the Delete command fired. This gridview works fine on the test site, but it does not work on the live site.
Do you know what causes this issue?
I am trying to use an Update Command within my GridView. I need to find the "FindControl" for the Edit Command textboxes.
Ie. When the user clicks the Edit button, the row is populated with dropdown boxes, textboxes, etc for editting. Then when the user clicks on Update (button) and the GridView1_RowCommand function is activated with 'if (e.CommandName == "Update")' statement with my FindControl. etc. and my sql UPDATE command statements are used. How do I convert my FooterRow info to my Edit FINDCONTROL info?
This is what I have:
[Code]....
i am using edit,update,cancel command in gridview, i need to update value in bound field how to retreive that value.
View 7 RepliesI have this code that hides a column in a gridview. (The column houses another nested gridview).
[Code]....
The trouble is that if I click the select link on one row that action to hide is carried out on all rows. How can I set this up so that it only hides the row that is selected?
I have a page that binds data from DB to a DetailsView.I want to use the auto-generated Update command.
Everything went OK, and also updating was successful, but if I remove any field that I don't want to have chance to update, then the Update command doesn't update! the old values retain!
I mean: if all of the fields are present in the detailsView, the update will be OK, otherwise, the update will NOT update any thing.I've tried to mark the fields that I don't want to view as "Visible = 'false'" but with no good results!
I'm trying to create a ShoutBox for my site, and for those of you who are not familiar with shoutboxes, they are chat boxes on websites that users can post live messages on, and the other uses will see their message and be able to respond. I didn't find any good ones online, so I started to write my own. I'm doing it with an XML, but I want the user to be able to post messages using a textbox I added (txtMessage) and the button (cmdPostMessage), which should add a new item to the XML file, and all the other uses will receive that message (their xmlDataSource and the DataList will PostBack every second or something like that). It is able to read messages, but not send.I am however facing three problems:
1- I need to find a way for the user's input to be added to the XML.
2- I need to find a way for the current logged-in username to be found, and added to the XML, and also detect if no user is logged in, in which case the user wil receive an alert saying "Please log in to post messages to the ShoutBox" and redirect them to the login page.
Here is the text in the XML
[Code]....
I am using asp.net(C#) as platform for building my application. I want to update the values in the database for the particular user & using the following code:
[Code]....
when I run this code, it works perfectly fine & there's no error, but when I check into the database, the values do not change & remains same. The default value in the database is NULL.
Kindly check into the matter & revert ASAP.
I'm a novice programmer and I have this situation: I have a nested Gridview, and I want to be able to DELETE the records in the nested Gridview. I have no problem inserting new records with the nested gridview, but it does not execute the DELETE Command on the SQL Datasource. I checked that the DATAKEYNAME on the nested gridview includes the the parameter that is used in the DELETE SQL Command on the SQL Datasource for that Gridview. But it seems to me that the parameter value is not being passed to the SQL Datasource by the nested gridview. Maybe I need to use a difference approach to execute this on a nested gridview compared to a regular gridview.
View 4 Replies