I have dropped a wizard control on the index page of an asp.net mvc 2 project. The button Next and Previous don't work.
Is the wizard control tailored for ASP.NET MVC2 ? If not can it be fixed and how ?
i am using wizard control in content page.if i use it in normal aspx it works.but not in content page.i use same code for aspx and content pages
View 1 Replieswhen i am trying to use a repeater to display data in a wizard control, everything seems worked as expected before i change the value of wizard's DisplaySideBar, here is my demo code:Test.aspx:
[Code]....
Test.aspx.cs:
[Code]....
guys who intrest on this you can copy this code and test it on your pc, when we click the link button in repeater's item will do nothing at the first time but it will work when we click it again.i have debug this and found that when the page is not in post back, the linkbutton's id will be "MainWizard_rpMain_ctl01 _lbEdit" in prerender method but after render it will change to "MainWizard_rpMain_ctl04 _lbEdit", but when page have been post back, the clientid will be correct as "MainWizard_rpMain_ctl01_lbEdit" and then event can be fired correctly.i thought this is a bug of .net framework, when i set the value of wizard's DisplaySideBar, it will ask to re-create controls but repeater haven't clean the item's count and then recreate item will use wrong item index, i hope this message can be post to .net framework team and they can find out what's the matter on it.
I have a MasterPage (MasterPage.master) with 2 child MasterPages (specialMaster.master and standardMaster.master). From the MasterPage.master I need to get at some of the controls in one of the children, specialMaster.master, say for example to hide certain
content if a session variable is not null.
I have an issue with my asp:Wizard, where basically I am calling the MoveTo function and it is not moving to the desired step. I have used the MoveTo function elsewhere in my wizard, but I only have the problem with this specific location.
[Code]....
In the above code, ValidateSelectModelStep() returns false, and so the block of code is entered. urchaseWizard.MoveTo(this.SelectModelStep) is called, and yet the Wizard just continues on to the YourDetailsStep. This however is not he case for the other steps. When the validation fails on the other steps, and purchaseWizard.MoveTo(currentStep) is called, the Wizard correctly goes to the current step and displays the errorText. What is really bizarre, is that if I change the step that we want to go to when ValidateSelectModelStep() fails, the Wizard will correctly go to the specified step. So it seems as though there is only the problem with when you are on the first step, trying to MoveTo the first step. Even more so, is the fact that if I try to call purchaseWizard.MoveTo(this.SelectModelStep) from some other step in the wizard, it correctly brings you to the first step. Note: In the first step I have a repeater, which for the validation I need to loop through all of the items and find if one is selected. My Validation function for that works fine, and the MoveTo function does get called. (I checked it through debugging) Does anyone have any ideas why this is happening and how to stop it so my validation restricts progression through the wizard correctly?
Ive been using visual studio to make a site and i was planning on using the wizard to create a contact us however the buttons dont seem to be working. They seem to take the data in then display the same page again. Does anyone know any reason for this?
View 1 RepliesI put common(for all my content pages) js to head section at my masterpage.
<head runat="server">
<script type="text/javascript" src="../Scripts/jquery-1.4.1.js"></script>
<script type="text/javascript" src="../Scripts/jquery.corner.js?v2.11"></script>
<script type="text/javascript" src="../Scripts/jquery.timers.js"></script>
<script type="text/javascript" language="javascript">
[code]...
I have a series of LinkButtons on my masterpage as follows:
<div id="mainNav" runat="server" class="mainnavigation">
<ul>
<li>
<asp:LinkButton ID="lnkHome"
[Code].....
I have simple click events defined for them, like this:
protected void lnkReports_Click(object sender, EventArgs e)
{
Response.Redirect("~/Administrators/Reports.aspx");
}
On any page that uses this masterpage, whether it is in a subfolder or directly at root level with the masterpage, these links don't work in any browser I have except for IE (Firefox, Chrome, Opera, and Safari). By that, I mean:
1. When I mouse over them, the cursor doesn't change to a hand.
2. When I click, nothing happens visually.
3. When I click, nothing happens in code. i.e., I set a breakpoint on the click events for the buttons, and they don't get hit.
In IE, everything works as it should.
In addition, I have subnavigation on some of my child pages, implemented the same way, and it works for all browsers.
<div id="mainNav" runat="server">
Platform: VS 2010, .NET 3.5, ASP.NET, Silverlight
I am working on an ASP.NET app that uses a Master Page. The master page uses the "blendTrans" attribute to prevent flicker between page loads during navigation.
Here is a code snippet:
<head id="Head1" runat="server">
<meta http-equiv="Page-Enter" content="blendTrans(Duration=0)" />
<meta http-equiv="Page-Exit" content="blendTrans(Duration=0)" />
....
</head>
In one of the content pages I create a Silverlight 3 app. Here is the code:
<asp:content>
<div id="silverlightControlHost" style="height:100%; width:100%; text-align:center;">
<object data="data:application/x-silverlight-2," type="application/x-silverlight-2" width="100%" height="100%">
<param name="source" value="ClientBin/DataMapperCtrl.xap"/>
<param name="onError" value="onSilverlightError" />
<param name="background" value="white" />
<param name="minRuntimeVersion" value="3.0.40818.0" />
<param name="autoUpgrade" value="true" />
<a href="http://go.microsoft.com/fwlink/?LinkID=149156&v=3.0.40818.0" style="text-decoration:none">
<img src="http://go.microsoft.com/fwlink/?LinkId=161376" alt="Get Microsoft Silverlight" style="border-style:none"/>
</a>
</object><iframe id="_sl_historyFrame" style="visibility:hidden;height:0px;width:0px;border:0px"></iframe>
</div>
</asp:content>
The Silverlight app works fine, but since adding the Silverlight app the navigation between the main pages on the app is very slow and gray is displayed between the page loads.
Has anybody else had this problem?
I have Master Page with 2 ContentPlaceHolds , called "left" and "right"
[Code]....
I have a page override 2 ContentPlaceHolds of Master Page
In this page, i have 2 WebUserControls called WUCLeft is put into "left" and WUCRight put into "right"
[Code]....
WUCLeft has a button to load WUCRight into "right" ContentPlaceHold
[Code]....
[Code]....
WUCRight has one TextBox, one Button and one Label, when I click Button, the text of TextBox is assigned to Label
[Code]....
[Code]....
The problem occurs after I press Button on "left" ContentPlaceHold to load WUCRight.
In the first, I click on Button on "right" ContentPlaceHold, nothing happens (the Text of TextBox is not assigned to Label). In the second, i click on Button, page is submitted and all control in "right" ContentPlaceHole are cleared.
What did i do something wrong?
I have webpage and a master page.In master page I defined a Label and ContentPlaceHolder :
[Code]....
In my webpage I have an updatepanel and a button that updates the Label.[Code]....
[Code]....
If the button is inside updapanel, nothing happens when I click the button (Label is not displayed), but if I move button outside the panel it works. (Button must be inside updatepanel and ofcourse no PostBackTrigger)
i have a masterpage and other pages. i want to use findcontrol method to find a textbox (not on the master page) to check whether it is empty or not.
my code is as folows;
Dim myContentPlaceHolder As ContentPlaceHolder = CType(Master.FindControl("MainContent"), ContentPlaceHolder)
Dim UpdatePanel1 As UpdatePanel = CType(myContentPlaceHolder.FindControl("UP1"), UpdatePanel)
I am porting my simple Role Based Auth to ASP.NET. It requires this check on each page:
[Code]....
If put in each page's OnLoad, it works fine. But when I add it to the masterpage, it doesn't work. Is there something about the ServerVariables or Session Object that would prevent using those in a masterpage? Is it an issue calling my class from a materpage?
I have an UpdatePanel on the page which I'd like to trigger using javascript.First of all my code perfectly works if it's in a website not being inheriting from a masterpage. Now when you put exactly the same code into a website which inherits from a masterpage, the UpdatePanel wouldn't get fired anymore.
Here's the code (.aspx) [Code]....
Here's the code (.cs) [Code]....
i have my NEWS BAR script code in my home Page which inherits from masterpage like this :
<asp:Content ID="content1" runat="server" ContentPlaceHolderID="mainholder" >
How can I get all the textboxes inside a create user wizard control using getElementsByTagName().
Below is my JQuery code:
[Code]....
The above code isn't displaying hint text when the textbox retreives focus.
I think there is something wrong with this getElementsByTagName("asp:TextBox"); , I have also tried getElementsByTagName("TextBox"); , getElementsByTagName(":textbox"); and getElementsByTagName("input"); .
But no one of them gets the textboxes array.
Can anyone tell what will be the correct syntax for getting all the textboxes inside a create user wizard control using getElementsByTagName()?
I have a wizard control and I have defined a custom header template for it and I have put a label control inside that header template and I need to access it programaticly at runtime.
How do I get reference to it in the 'ActiveStepChanged' event of the wiard?
I am trying to use wizard in an update panel but the wizard is disappearing when I click for the next or prev step button. I only want to close wizard , when I click the finish button. How can I do this ?
View 1 Repliescan you give me the example of asp.net wizard control?
View 1 Replieshow to i can use listview control with ado.net(without wizard),and insert image in itemTemplate when nothing is present in html code section....(i use an sql query to retrieve data,and i have image name in db,but i dont know howto show it in listview)
View 1 RepliesCode-behind:
[code]....
The step show at the left bar with the Title, but the HTML (fieldset and the paragraph) is not displayed in the step. It requires to be a TemplatedWizardStep too because we use Template for the layout. How do I add a Step dynamically?
I have a wizard control and in one of the steps, I checked the input box if it's blank or not. By doing this, now the sidebar link and other steps all cause validation = true. How can I resolve this problem so that the cause validations for sidebars and other steps are false?
View 6 RepliesI have a Wizard server control to collect data and send it as an Email in the last step the problem i think that the page post back and clear the fields:
[Code]....
My Job wants me to create a popup with an updatepanel inside of it. The updatepanel would have a wizard control that would take you through some steps. Would it be better to use and Iframe to simulate an updatepanel between steps or just use an updatepanel?
View 1 RepliesSay I have this entity with a lot of attributes. In the input form I have decided to implement a wizard control so I can collect information about this entity in several steps. The problem is that I need to collect information that has been modeled has many to many relationships. I am planning to use a telerik gridview to manage this (add/edit/delete), the problem is where do I store that data since the entity in a insert form is not created on the database yet. OK so I can store all that info in temporary lists residing in the viewstate, waiting for the final submit where I dump all that in the DB, but one of the steps I am collecting files...now storing files in the viewstate is out of the question, same as as storing them in the session...I have been thinking of implementing in a way that the user has to submit some info first (say first 3 steps), commit the data to the database creating the parent entity and then start inserting all the childs entities...but this will get weird as it's confusing since on the first steps you not saving the data to the DB and on the next ones you are commiting directly...
View 1 Replies