Does The Regasm And Regsvr32 Update The Dlls With Newer Version
Aug 16, 2010
I have been developing my first setup program and for that It needs few dlls to be registered using the Regasm and also Regsvr32. I have used vsdraCOM and vsdrfCOM registering options for the dlls to register in VS2008 for Regasm and Regsvr32 respectively.
1) Are the registering options that I have used correct?
2) Also if there is a new version of the dll then it should install the newer version of it. How am I supposed to do this? And the fact which is running in my mind is where does(I mean the location) the Setup project will look for the newer versions of the dlls while installing the program?
View 1 Replies
Similar Messages:
Jun 22, 2010
I have 3 dll's compiled and put inside the bin dir of a website. They were referenced some time ago on a different computer with their respective source code.
I don't have the original source code for this version (all 3 dlls are like one app. They use each other functions) but I do have a newer version.
What I wanted to do was to completely remove any reference for the old version and just add a reference to the new version dlls. I tried:
Rightclick on dll---> delete , tried: look inside project file,sln, anywhere - web.config etc. to find the reference ..... Nothing. The old dlls come back after I recompile.
One of the new dlls has a different name than the same one in the older version. When I replace the older versions with the new ones and add the third dll with the different name and delete the older one and recompile. The older one just comes back from nowhere, and I get an error that I have some functions running both on the older dll and the newer one and it won't compile.
How do I completly remove the older version so I can start over with the new one?
View 2 Replies
Jun 25, 2010
My Exe had a reference to a older version of a dll in the GAC both old & new versions are present in the config file i have given the binding redirect setting to refer the new version of the dll , thouhg when exe is running it is still refering to the old version , could some one shed some light here.
View 1 Replies
Mar 25, 2011
There is an existing asp.net 2.0 app on an IIS 6 server. I need to add a feature/page to this site (third party app, don't have source code). I'm creating my tool in VS targeting dotnet 4. For end user convenience I need my tool to be available within the same url namespace as this .net 2.0 app. I assumed I would just create a new virtual directory within this existing app to put my app. But I hadn't thought about the different framework versions.... the web server does have v 4 installed. So can I create my virtual directory and host my v4 tool there, within the v2 website?
anything I should be aware of to make that work?
View 13 Replies
Jan 17, 2011
Trying to get the "Product Version" attribute from loaded DLLs.
For example, my System.Web.dll has a product version of 2.0.50727.4955 if you click File > Properties from explorer.
However I have the following code:
[Code]....
The ImageRuntimeVersion returns v2.0.50727, is there any way I can get the last 4 digits of the product version also?
View 2 Replies
Jun 7, 2010
I noticed that the DLLs in the bin folder for asp.net websites do not seem to be getting saved. When I goto a new computer and get latest I am missing the DLLs.What is the correct way to fix this ? Should I create a seperate folder to contains all DLLs ? And then can I somehow tell my bin references to goto that folder to get the DLLs?
View 2 Replies
Feb 25, 2011
We have an application that is already deployed in the production environment. And currently it is using Dundas evaluation version. We tried updating it to the licensed version by simply pasting the dll file. but we got the error message as "The file has not been pre-compiled and cannot be requested".
View 1 Replies
Mar 2, 2010
I wrote a web project in VS 2005 using the AJAX Control Toolkit, now I'm resuming this project in a new machine and some AJAX components such as Cascade drop down doesn't works in none page.if I start a new project it works fine, so i think the problem is in the project I wrote years ago. when I try to include new ajax components I get an error message like "Attemted to read or write protected memory. this is often an indication that other memory is corrupt." and in the status bar keep saying, "adding reference to 'AjaxControlToolkit.dll'..."
View 5 Replies
Apr 4, 2011
I update my freetextbox version into 3.3.0.22838. I don't know how to update it. i just copy paste my new version in bin.
And I get this error: Could not load file or assembly 'FreeTextBox, Version=3.1.5.21298, Culture=neutral, PublicKeyToken=5962a4e684a48b87' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Line 1: <%@ page language="C#" masterpagefile="~/Template/BackendTemplate.master" autoeventwireup="true" validaterequest="false" inherits="Backend_Modules_BookManagement, App_Web_wplihlju" title="Untitled Page" %>
View 4 Replies
Jan 13, 2011
i have created a pluIn(setup) for IE. this plugin add in IE addOns.this pluIn(setup) installation and uninstallation is working perfect. now i want use a webservise that check version of my computer plugin and server computer plugIn(setup).if both version are different then ask for updation of PlugIn(setUp).if i click on yes then it update my end PlugIn(setup).
View 1 Replies
Jan 5, 2011
I am using update progress but it is not showing with "<!DOCTYPE
[code]...
Is there any solution to show it with the earlier doctype?
View 2 Replies
Mar 27, 2010
I'm trying to take some pages from one of our newer web apps and put them into an older web site we created several years ago.The newer pages uses the membership provider and has proper roles that allow users access to folders that pages reside in.The older pages do not use the membership provider.It seems to want to access ASPNETDB.mdb - which we do not have in the older site.Where are references to the ASPNETDB.mdb made - I can't seem to find them and I need to turn them off.
View 8 Replies
Jan 26, 2010
I have a code that runs correctly when compiled with Compaq Visual Fortran 6.1; however, when compiled with Visual Studio 2003 (w/ intel fortran compiler), it crashes due to a convergence issue. Since the input deck that the code reads from is exactly the same in both cases, I assume this has to be a configuration issue between the two compilers.
View 2 Replies
Oct 3, 2010
Two websites that are being developed by me is online in my office network. Our IT department has updated Internet Explorer and the view my websites is completely disturbed. Now we have Internet Explorer 8.0.6001.18702 In most of my pages the setting is that from top to bottom, in top there is a panel holding dropdown, textboxes and just under this panel there is another panel with gridview. When the pages load the first panel with the search controls are ok.
When i supplied search parameters then gridview resulted overlaping the above panel and it scrolls behind the above panel. When there is one record populates to gridview the whole gridview would not be seen but the count label shows one record.
View 15 Replies
Nov 12, 2010
Are the Crystal Reports objects within Visual Studio (I'm using 2005) the full version or is it a trial version that is missing features?
View 1 Replies
Sep 26, 2010
I'm try to get my site to detect what browser someone is using to ensure they're using one that is compliant with our site. Everything works, except Firefox seems to post the wrong version in the Request.Browser variables.I'm on Firefox 3.6.10, but Request.Browser shows Mozilla 1.9.2.10. It's correct in the HTTP_USER_AGENT string:
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.10) Gecko/20100914 YFF35 Firefox/3.6.10 ( .NET CLR 3.5.30729)
Is there a way to detect it better without having to parse through the HTTP_USER_AGENT string?
View 3 Replies
Mar 8, 2011
Is there any limit on the size/numbers in the version number of the FormsAuthenticationTicket.
I tried to create an ASP.NET cookie using forms authentication, with a large version number(ex: 1234567 need this number for identification purposes). But when I decrypt the cookie I get 135 as the version number.
Initially the old forms authentication cookie was removed, in order to add new information.
Response.Cookies.Remove(FormsAuthentication.FormsCookieName);
Following is the code I used to create the FormsAuthentication cookie.
FormsAuthenticationTicket newAuthTicket = new FormsAuthenticationTicket(1234567, un, DateTime.Now, DateTime.Now.AddHours(5F), false, user_data);
HttpCookie newauthCookie = new HttpCookie(FormsAuthentication.FormsCookieName, FormsAuthentication.Encrypt(newAuthTicket));
Response.Cookies.Add(newauthCookie);
After retrieving the cookie, the version number I got was 135. This number varies with different version numbers.
string cookieName = FormsAuthentication.FormsCookieName;
HttpCookie authCookie = Context.Request.Cookies[cookieName];
if (authCookie == null)
{
return;
}
FormsAuthenticationTicket authTkt = null;
authTkt = FormsAuthentication.Decrypt(authCookie.Value);
if (authTkt == null)
{
return;
}
int versionID = authTkt.Version;
Can someone let me know if it's a bad idea to use such big version numbers, or am I missing something in this.
View 1 Replies
May 22, 2010
I have Visual Studio 2008 installed on this workstation with SQL 2000, 2005 Express, 2008 Express and I think 2008 R2 (not sure if that is a version itselve or not)
I will call that workstation HOME
I created some tables in SQLEXPRESS through VS2008.
I worked on this project on another workstation that I just installed VS2008 annd SQLEXPRESS 2008 and I know that was R2
Installed Visual Studio 2010 trial edition between the thiem I made the tables on HOME and tonight for the first time since that install
I am now getting the "cannot be opened becuase it is version Version 661. This Server supports version 655..."
What to do now?
I can opened SQLExpress 2008 management studio and it is running.
So is my SQL 2000. The problem seems to be that after the VS2010 install neither VS2008 or VS2010 can connect to the SQLExpress 2008
What do I do now?
I can't remove sql 2000 because it is tied to several 3+ gig databases that will not work in Express.
View 2 Replies
Jan 5, 2011
i am working in webapplication in asp.net using c#.I have a problem that currently i am using ajaxcontroltoolkit version 3.0.20820.0 but in this toolkit i don't have Editor Ajax control so i want to upgrade it with new version ajaxcontroltoolkit version 3.5.40412.2
When i upgrade it then my old ajax control is not working like validatorcalloutextender and requiredfieldvalidator etc.
so please tell me how can i upgrade ajaxcontroltoolkit version from 3.0.20820.0 to version 3.5.40412.2
i also use in web.config file but not successfull.
View 1 Replies
Feb 28, 2011
I have downloaded published (code behind files are no there, combined with dll in bin folder) web application from window server 2008 where it is hosted, & open it with visual studio when i debug that application it shows following error: "Colud not load assembly because this assembly is built by a runtime newer than the currently loaded runtime" I don't know how can i solve this problem and test application locally.
View 2 Replies
Aug 11, 2010
I have a solution I'm working on in VS2010 Professional, using ASP.NET 4.0 with the AJAX Toolkit.This has been working fine, but when I started it up today, I got the runtime exception shown above. This exception occurs on any page with a control from the toolkit.Sometimes when I load a page, I get an exception "Could not load file or assembly 'System.Windows, Version=2.0.5.0, Culture=neutral, ublicKeyToken=7cec85d7bea7798e' or one of its dependencies. The system cannot find the file specified." If I then reload the page (without making any changes), I then get the exception shown in the subject line.I tried dragging an AJAX Toolkit control from the toolbox onto a page, and then deleting it, and that worked - once. The next time I tried the page (or any other), I got the exception again. Dragging a control out didn't help this time.
View 5 Replies
Jan 13, 2010
I have an ASP.NET project under source control (Subversion). For various reasons, I don't want to add the Bin directory or its contents to source control, so I have it svn:ignored. DLLs are loaded into here during a Visual Studio build, and I can start with a clean directory and/or delete all the contents of this directory and still have a successful build.
View 5 Replies
Nov 13, 2010
The server is 64 bit, but the app pool is configured to run as 32 bit. Do i need to publish 64 bit dlls? The rapid fail recovery sometimes recycles the app pool and someone suggested that it may be because i am not using 64 bit dlls. Doesn't sound likely... but you never know.I switched the publish settings to release and any cpu. But it spits out in the bin folder /bin/x64 as well. Do i copy over everything in the bin folder or do i just copy over the x64 dlls?? kinda confused on that. And why are pdb files being spit out with the dlls as well? I thought this was a debug thing only.
View 2 Replies
Jul 22, 2010
Adding dlls to projects
View 3 Replies
May 10, 2010
I have two 3rd party unmanaged c++ dll and one C++ project which uses these dlls. In my asp.net project i added c++ project as reference but in runtime it fails with that error:
Exception from HRESULT: 0x8007007E
Visual studio puts c++ project's dll into /bin folder auto. Even if i put other dlls into bin folder, it fails.
View 1 Replies
