Dropdown On Page That Reads A Value From User Session
Sep 13, 2012
I have a dropdown on my page that reads a value from the users session.
ddlMemberGender.SelectedValue = Session("MemberGender")
there are two choices (obviously) : Man and Woman
So when the Session value sets the DropDown to Male it works fine. But if the user changes the DropDown to Woman in my code behind it still reads "Male" as the value... for example:
Response.Redirect("/post.aspx?Gender=" + ddlSearchMemberGender.SelectedValue) will still read the selected value that was set previously instead of the value it was changed to.
View 2 Replies
Similar Messages:
Feb 16, 2010
I have dropdown and I have to bind that dropdown on the basis of user login so that when the page load the drop down should show only one item on the basis of user login and i may have use that dropdown item as a search parameter.I have a objectdatasource named TblFltReg having one of the fields named "Owner" which is the SectionId.
There is a table named TblSections having "SectionId" and "Description".User can be selected in a Session variable.I have another table "Users" having "UserName", "UProfile", "SectionId".Actually I dont know how can I get SectionId from Users table into Session variable.So I have two tasks: one to get SectionId into Session Variable and another is to show dropdown item on the basis of User login.Hope you understand.
How can I perform that task?
View 4 Replies
May 7, 2015
URL.... Still there will be need of url in ajax method if i put javascript in site.master.cs . As what i have understood from that mysite.master.cs will be like this :
protected void Page_Load(object sender, EventArgs e) {
try {
if (Session["Prefix"].ToString().Trim() == "sys_admin") {
UserNameMasterLabel.Text = Session["UserName"].ToString().Trim() + " (ADMIN)";
[code]....
And site.master will be like this :
And I have to put next method in DailyLog.aspx page ? like this
System.Web.Services.WebMethod(EnableSession = true)]
public static int RefreshSession() {
HttpContext.Current.Session["Name"] = "BSD";
Configuration config = WebConfigurationManager.OpenWebConfiguration("~/Web.Config");
SessionStateSection section = (SessionStateSection)config.GetSection("system.web/sessionState");
int timeout = (int)section.Timeout.TotalMinutes * 1000 * 60;
return timeout;
}
But I have several pages in my website , by doing the above story will it work for Builder.aspx ? or any other page rather than dailylog.aspx ?
View 1 Replies
Jun 15, 2010
I have an aspx page that has all its controls inside the scriptmanager and update panel.
I want to send the user to sessionexpired page after 20 mins of inactivity.
For this, I am writing the below code on page_load
Response.AppendHeader(
"Refresh", Convert.ToString((Session.Timeout * 60) + 10) &
"; URL=SessionExpired.aspx")
But the page is going to sessionexpired page after 20 mins even if the user is working on the page.
I think since I have all my controls in an update panel it is not doing a complete postback and hence the session object is not getting refreshed.
View 1 Replies
Sep 10, 2010
Building asp.C# shopping app that is using a hosted payment page to process payments (using posting of data to a hosted payment page). SSL certificate is signed and installed.
Flow:
Prelim) (HTTPS) Users authenticate using asp Login control
1) Users add items to cart.
2) (HTTPS)Users go to checkout page.
3) Users finalize their order, then click pay now after agreeing to T&C.
4) Server gets cart data (from MSSQL2005) and sets a transaction cookie (expiry set to 20 mins).
5) (HTTPS) Server Response.Redirects to an html page (in the same folder as the login protected pages).
6) Html page reads transaction cookie data and generates form fields.
7) (HTTPS) Html page posts data to hosted payment page (php).
8) User enters payment info and clicks pay now.
9) (HTTPS) hosted payment page posts info back to a .aspx page that checks if payment OK.
10a) If payment !OK, redirects to a declined page.
10b) (HTTPS) If payment OK, sets a verification cookie (expiry set to 20 mins). Then redirects to another html page.
11) Html page reads cookie data and generates form fields.
12) (HTTPS) Html page posts data to hosted verification page (php).
13) Verification page verifies (of course), if transaction ok.
14) (HTTPS) verification page posts data to a .aspx page that checks if verification OK.
15) If verification OK, process orders and do receipt stuff.
Issue:
This control flow was tested on an unsigned dev environment. SSL was being enforced, if needed on the unsigned SSL certificate. So we'd get prompts that certificate may be bad, but the control flow worked seamlessly.
However, now live with a signed SSL certificate, going from step 5 to 6, we are encountering a situation where some users (not duplicated every time, but verified that it does occur) when they click pay now and are redirected to the html page, they are forced back to the ~/login.aspx page (as if they were logged out).
Things to note:
a) The session did not time out.
b) The browsers have cookies and javascript enabled.
c) I can process the entire flow seamlessly on the same machine with other accounts, and occasionally, the same account.
So, basically, I'm stumped... Is this a viewstate error? A login control bug that won't let me redirect to an html page because it is now using a real SSL? Anyone have any experience with this kind of deal? I'm at a loss for solutions at this point.
View 1 Replies
Jul 15, 2010
I have a function on page load which will work based on dropdown selected value. and I am using this dropdown in a user control. So getting problem because the dropdown value is not loaded yet before Page Load. How Can I do that using those control still.
Here is my code below.
public partial class GradeEntry : System.Web.UI.Page
{
StudentManager studentManager = null;
CourseManager courseManagerObj = null;
GradeManager gradeManager = null;
[Code]....
View 7 Replies
Apr 26, 2013
I have made a web page in which there is login screen when user login it goes next page but my problem is if i directly enter the url of that page it open. I want it should not open unless the user log in...
View 1 Replies
Apr 12, 2010
Once user enter credentials i want his name to be appear on top.User should be maintained through out the pages of website until he choose to sign out.And also diff users will have diff access to some parts of website, like only manager can delete the content.
View 1 Replies
Jun 30, 2010
I have a page that I need to disable, or re-direct to another page if a different type of user logs in.
The application has this page for one type of user but another type of user is not allowed access it.
How would you do this type of thing?
View 3 Replies
Jan 12, 2011
I am using URL Routing to route user to his profile page, which is a child page. Now the problem is that all the images, javascripts references are distorted when i user the url to reach that page whether logged in or not logged in (both the cases). But after reaching this page when i login from this page thru my modal popup login control, all the references seem to work fine. It is to be noted that i am still in that same page which i reached after url routing. So upon logging from here the whole page works and displays fine.
How come the references are automatically adjusted when i am logging in from this page and are not referenced when i log in from other page and route here or when i am logged out?
Global.asax code:
void Application_Start(object sender, EventArgs e)
{
RegisterRoutes(RouteTable.Routes);
}
public static void RegisterRoutes(RouteCollection routes)
{
routes.Add("UseridRoute", new Route
(
"profile/{user}",
new CustomRouteHandler("~/UserProfile.aspx")
));
}
View 2 Replies
Mar 10, 2010
How i redirect the page to Login page automatically if session Expires .
View 7 Replies
Sep 7, 2010
i have 2 page,
1.login.aspx --- 2.welcome.aspx
in my login.aspx im storing username into sesssion as below:
Session["usernm"] = txtUsername.Text;
in my welcome.aspx page
in page_load event
if (Session["usernm"]==null)
{
Response.Redirect("Login.aspx");
}
here if i manulally paste the url ( http://localhost:4125/Loginado/welcome.aspx) it should go to login.aspx for user credentials
but its going directly to welcome.aspx page.
View 5 Replies
Jul 23, 2012
I want to maintain user session in my project...the problem i am facing is when any user login is nt maintained.
View 1 Replies
Oct 29, 2010
I receive lists from a web service and then I convert the lists to datatable and then I add the datatables to a dataset and from there I get the xml from the dataset where I can save it into a sql database. But the problem is that the xml has /r/n between all attributes and elements. I dont know how to get this out of the xml. Can this be because of my converter. If so can anyone give me a better way to get multiple lists into a dataset.
View 2 Replies
Feb 23, 2011
i have Using aspnetmembership
i want to know how i can ReNew The Life Time Of Page.User.Identity.UserId Session, , how i can increase the Time Of this session ??
i want this scenario in case when the user LogOn for 15 minutes , then the page refreshed ,then renew the TimeOut Of Session by adding addtional 15 minutes and so on
note that im using Page.User.Identity.UserId Session
View 2 Replies
Nov 22, 2010
I am trying to find a code snippet that reads a sql server db and retrieves an image from a table and converts it into a thumbnail image. I'm looking for VB.Net code that does this and I can't find anything.
View 23 Replies
Sep 8, 2010
Does anyone know how to do this so when I select something the 1st dropdown and the 2nd one becomes visible and populates list from a Select statement. I really need help on how to do in an aspx and not on the code behind page.
View 12 Replies
Mar 11, 2014
I have seen article in code snippet but i have never used web services so that is complicated .
View 1 Replies
Dec 5, 2010
I have a website hosted with sql 2008 database on Godaddy. Here's my problem descriptionbefore I actually begin implementing.Entries are made in a table named "XYZ" by a third party program. Now, there are multipleclients (could be asp.net ajax web based or vb.net desktop clients which I have not decided yet) who
read data from this "XYZ" table every 10-15 seconds. The connection string used by these clients would be same. If I have 10000-20000 clients making connections and querying same table, would that cause any breakdown? Since my connection string is same, connection pooling isautomatically in place.
What else do you think I need to take care of? Or is there any better way to implement this setup?Also, should I go for asp.net ajax client implementation or vb.net(c#) client implemtation ?Your inputs would be highly helpful to me. I am looking for a medium to long term solution to thissetup.
View 10 Replies
May 4, 2010
I have written custom code for login and logout...When use clicks on logout button the current session is closed and user is redirected to a login.aspx page...The problem is that when a user click a back button on internet explorer it the previous page he was navigating is shown to him...(altough he cant perform any operation as session is null and their is condition in page load that if session is null user should be redirected to login page)May i have to clear cache of client ??
View 3 Replies
Feb 1, 2011
Let suppose, I am building an asp.net website which has login scenario in it. I want to provide a certain functionality to the website that if the user is already login on computer 1 and now try to login on computer 2, so he will be allowed to remain login on computer 2, while automatically logout him from computer 1. I also know that http is a stateless medium, so whenever user interact with computer 1 and try to interact with the page, it will get noticed at that time.
View 2 Replies
Jul 15, 2010
I have a website live in asp.net
now if user closes browser. the session does not get killed.
I spoke with friend and he said that cannot be done as sessions are on server.
but i see banking website who kills session when browser is closed.
View 10 Replies
May 5, 2010
I have couple of DDL's which let user choose couple of different values from it. Once the user has made his selection he clicks on the "Submit" buttion which redirects the user to the other page, which then displays table from backend SQL DB. The pages are named Page1.aspx and Page2.aspx resp. I am using Querystring to carry forward the values of the DDL's to Page2.aspx.
How can i modify the query in such a way that even if one of the DDL's is left blank the Query would ignore that and shall produce the table considering value of DDL2 in the where clause. In case both the DDL's are empty then the query will not have a where clause and shall showcase the complete table as such. I've written a query for this but it's not working the way it shoul.Here is my code for the SQLDataSource: [Code]....
View 3 Replies
Nov 22, 2010
I've developed a flash utility for a game portal that i'm building. The swf reads an xml file that contains the most played games. It works on the laptop but in the website
View 1 Replies
Feb 2, 2010
I'm trying to define a computed column that will contain an auto-incremented number. In other words, I want it to work exactly like identity, but since I can have only one identity column per table, I wanted to make a computed column that reads its latest value and increment it by 1.
View 5 Replies
