Forms Data Controls :: Add An Update Command To Page And Run The Page Getting Error Message - Server Error In '/MYApplication?
Feb 22, 2010
When I add an update command to my page and run the page I get this error message
Server Error in '/MYApplication.
Incorrect syntax near '-'.Must declare the scalar variable "@recnum".
Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near '-'.Must declare the scalar variable "@recnum".
Source Error:
[Code]....
Stack Trace: [Code]....
Version Information: Microsoft .NET Framework Version:2.0.50727.3082; ASP.NET Version:2.0.50727.3082
I am trying to handle the unhandled exceptions in my project.I tried with this following code in my web.config filebut it is not at all redirecting to an error page which i have created instead of that it is throwing an exception in my code itselef. How to print the error description over therein my custom error page.
I am developing a web application on a PC. The application files are in C:DevelopmentmyApplication..I publish the site to a test server on a local network. I publish the site to mytestServerWebSitesmyApplication...This server address is actually D:WebSitesmyApplication - and, after I publish, all that is in there are are the usual .aspx files and the compiled dll in the bin etc.
Running the site in a browser going to URL....(whose virtual directory is pointing to the physical directory D:WebSitesmyApplication) the site runs okay. However, one page is falling over and the stack trace says the error is in C:DevelopmentmyApplicationOutlookReminders.aspx
Which I don't get. How does the server know where the application was developed? Surely these errors would normally say, in the stack trace, that the error occurred in URL.... Why is it saying the error is in a file on a development box?
I have a serious problem with "Error on Page". The error message points to line number 939, char 13. In my code behind (C#) in line number 939 is only an obsolete method found which is no longer called. The aspx file has only 339 lines. What the heck is line number 939?The Webapplication allows a special user group to change some group memberships for members of another user group in Active Directory. The App handles 3internal DataViews derived from corresponding DataTables as DataSource for 3 GridViews and some other internal lists with objects (List<obj>).
It uses windows authentication to get current users credentials and his membership in the "Operators" group. This credentials will be passed-through to allow the process managing group memberships in active directory.After starting the App in browser it seems to work fine. But after an indeterminated time it doesn't longer respond. After each click on buttons (or link buttons) you only can see the message "Error on Page" in the browsers status bar below.I played with session timeout, storing the DataTables in session variables, without success.
Last week I found this article here: [URL]" and I addedEnableEventValidation="false" ViewStateEncryptionMode="Never" to Page declaration. However, at some point the the server does not respond. Each time the worker process on webserver recycles it seems the application turn to wrong state. Might be important: All controls including GridViews are embedded in an AJAX UpdatePanel. How to get a better error message? Debugging is enabled and Custom Error handling On, Off or Remote Only brings the same result as described.
All the examples and websites i have looked at redirect a user to the error.aspx page when an error occurs. How do you just display a friendly error message on the page the user is viewing saying something like "Sorry unable to do whatever" I've tried using a try catch block on my class that executes a stored procedure and put another try catch on the controller, but this does not work and i still get the default error message (System.InvalidOperationException was unhandled by user code) My code is below:
[Code]....
So how can i just return ViewData["SqlError"] message in page.
I have a data driven asp.net website with frames on the top, left, right and center screen. If a page generates an error on any of the frames, I want to redirect the whole site back to the Default.aspx. Currently, when a frame page errors in one of the frames, that frame gets the error pages. Site is URL.... Is this something that can be handled?
I'm making changes to some xxx.resources files on our web server, everytime I try and copy the new file out to the server I keep getting the error:
'the process cannot access the file because it is being used by another process.'
I get this for about 20 minutes or so after I check the web site. Is there another way to update/copy the xxx.resources file on the web server without waiting 20 minutes or so to do so?
I got a view that uses the ajax.beginform tag.This works great but if I want to do some validation to the data and then return a error message to the page it doesnt work for me.Here my code :
I want to display error messages on submit button.
My view is for example i got 5 error messages when i clicked submit button. First it shows 1st message and goes to that particular error.after rectifying the 1st error it goes to 2nd error message like that...
I am trying to passing Exception info tpa custom error page that I have created, and I'm looking for the best way to do so.I ended up creating a session object on my Global.asax page, and I pass the error data to the session object during the Application_Error event, but it throws it's own exception prior to working.
[Code]....
I have also updated my web.config with my error page that I would like to pass session object data to:
Session.RemoveAll(); Session.Abandon(); Response.ClearHeaders(); if (Session["name"] == null) { Response.Redirect("login.aspx"); }
I have used this line for logout code , after getting logout i i tried pasting the URL in another tab it is showing
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
Line 31: { Line 32: con.Open(); Line 33: Label1.Text = Session["name"].ToString(); Line 34: string a = ("select name from user2 where name='" + Label1.Text + "'");
I don't want to show this error message, i want to reload the login page when Pasting URL or Back Button ..how can i do this?
In my application a mail message send to particular recipeeient with msg body contains a hyper link.. when the recipent click on this link,it will redirect to another form(InternalForm.aspx)... bt when clicking the link error is occured,whuy its happening???? In InternalForm.aspx,page load portion access the link content(badgeno).. page load portion code of InternalForm.aspx is shown below:-
I am showing Custom Error in my page.if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page.I am attching the Screen shot.Can any body help me out how to show the Error page on entire page if something happend in any where submaster or other page.Here is the code that I am using in web config file to show custom Error page..
[CODE]...
Here I know the issue what's going on.This issue is occurring because i am using AJAX to partially load the contents of the tabs after the initial page load so the error is occurring AFTER my master page has been loaded.What I need to do is provide a javascript function to handle the error after the ajax call has returned and redirect to the error page.How to write this Javascript and where Do I need to write this?
In Windows XP, I used the following command line to tie a particular website to a particular version of .Net Framework:
C:WindowsMicrosoft.NetFrameworkv2.0.50727 aspnet_regiis -s w3svc/1/root/sdcrrlf (sdcrrlf is the website and is written in ASP.NET 2.0; hence uses v2.0.50727; some other of my sites use V1.1.4322)
This command line does not work in Windows 7 with IIS 7.0; error message says path is incorrect.
how would i do my Gridview delete command like a update command?
im using a datasource... and my delete command is like my update command... so i can change the status into "INACTIVE"...
DeleteCommand="UPDATE ACCOUNT_MAINTENANCE SET am_status = 'INACTIVE' WHERE (accmain_no = @accmain_no)"
UpdateCommand="UPDATE [ACCOUNT_MAINTENANCE] SET [account_type] = UPPER(@account_type), [min_deposit] = @min_deposit, [min_capital] = @min_capital WHERE [accmain_no] = @accmain_no"
when i press my delete command at gridview... the status changed into "INACTIVE" but when i refresh or press f5... it automatically update the status into "INACTIVE" also...
created website in VS2008 with createuser and login page.I was able to run the createuser page, but while trying to run the login page i received error:Server Error in '/' application.resources not found.
I just got a new computer with Windows 7 and installed IIS, including support for ASP. I am running everything locally on my computer. A simple statement like <% response.write time() %> works fine, so ASP is working, However, when I try to run a page that accesses a database (at least, I am assuming that that is the root of the problem) then I get the unhelpful error message:An error occurred on the server when processing the URL. Please contact the system administrator.If you are the system administrator please click here to find out more about this error. I have no idea where to begin. the database is in the same location as it was on with my old computer, and I have adjusted permissions to the database so that everyone except Creator Owner has full permissions - for whatever reason I am not able to change Creator Owner permissions.
I have forgotte password page in my application,page have one textbox to insert email address,when user click on submit button if inserted email address (i.e. abc@gmail.com) does not exits in DB it will give custome error message like "Email ID not available".after that suppose user will enter inproper email address (aaa#gmail.com) than client side validation for regular expression will file "Email id not valid",at same both message be on screen,now i want only one message at a time.so please can you help me for same
i am experiencing thi error when i click on the application in the remote machine.
Server Error in '/please-god' Application.
Security Exception Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file.
Exception Details: System.Security.SecurityException: Request for the permission of type 'System.Security.Permissions.EnvironmentPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
Source Error:
Line 7: Dim oBF As New BinaryFormatter() Line 8: Dim oFS As FileStream Line 9: Dim strPath As String = Path.GetTempPath & "schedule.Bin" Line 10: Line 11: Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Partial Class appointmentscheduler Inherits System.Web.UI.Page Dim arrCalendar(12, 31) As String Dim oBF As New BinaryFormatter() Dim oFS As FileStream Dim strPath As String = Path.GetTempPath & "schedule.Bin" Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load If (Cache("arrCalendar") Is Nothing) Then If (File.Exists(strPath)) Then oFS = New FileStream(strPath, FileMode.Open) arrCalendar = DirectCast(oBF.Deserialize(oFS), Array) oFS.Close() Cache("arrCalendar") = arrCalendar End If Else arrCalendar = Cache("arrCalendar") End If End Sub Protected Sub btnSave_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnSave.Click arrCalendar(Me.myCalendar.SelectedDate.Month, Me.myCalendar.SelectedDate.Day) = Me.myNotes.Text oFS = New FileStream(strPath, FileMode.Create) oBF.Serialize(oFS, arrCalendar) oFS.Close() Cache("arrCalendar") = arrCalendar End Sub Protected Sub btnDelete_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnDelete.Click arrCalendar(Me.myCalendar.SelectedDate.Month, Me.myCalendar.SelectedDate.Day) = "" oFS = New FileStream(strPath, FileMode.Create) oBF.Serialize(oFS, arrCalendar) oFS.Close() Cache("arrCalendar") = arrCalendar Me.myNotes.Text = "" End Sub Protected Sub myCalendar_DayRender(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.DayRenderEventArgs) Handles myCalendar.DayRender If arrCalendar(e.Day.Date.Month, e.Day.Date.Day) <> "" Then e.Cell.BackColor = Drawing.Color.Red End If End Sub Protected Sub myCalendar_SelectionChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles myCalendar.SelectionChanged Me.myNotes.Text = "" If arrCalendar(Me.myCalendar.SelectedDate.Month, Me.myCalendar.SelectedDate.Day) <> "" Then Me.myNotes.Text = arrCalendar(Me.myCalendar.SelectedDate.Month, Me.myCalendar.SelectedDate.Day) End If End Sub End Class
What do i have to do to eliminate this error message?
After this message is displayed , no pages is able to access ....
The error message is :
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster
