I am trying to "reset" the DetailsView in View1 to ReadOnly mode if the user changes the index in RadioButtonList. Currently, it is working correctly for the first pass and second pass, but fails at the third pass. I want it to just cycle through the DetailsVIewdatabound event, but the cycle breaks on the third pass and I'm not sure why?
[code]...
I have some ImageField in my DetailsView and when I changed it to Insert mode then ImageField is also became the textbox that allow you to type something, and my question is how I can make ImageField to be read only when I changed DetailsView to Insert mode?
<asp:DetailsView ID="dvNew" runat="server" AutoGenerateRows="False"
AllowPaging="true" DataKeyNames="ID"
DataSourceID="DataSourceNew" Width="600px" Font-Bold="False" AutoGenerateInsertButton="True" >
<Fields>
<asp:BoundField DataField ="name" SortExpression ="name" HeaderStyle-ForeColor="Black" > </asp:BoundField>
<asp:ImageField DataImageUrlField="Image1Path" NullDisplayText="No Image"
ReadOnly="True" ItemStyle-Height="250" ItemStyle-HorizontalAlign="Center"
ItemStyle-VerticalAlign="Middle" ItemStyle-Width="250" >
</asp:ImageField>
In my code file
protected void Page_Load(object sender, EventArgs e)
{
DataSourceNew.Selected += new SqlDataSourceStatusEventHandler(DataSourceNew_Selected);
}
protected void DataSourceNew_Selected(object sender, SqlDataSourceStatusEventArgs e)
{
if (e.AffectedRows == 0)
{
dvNew.ChangeMode(DetailsViewMode.Insert);
}
}
gaining mode changing for formview in VB.The problem is that, the current mode im using was ReadOnly, and i want to add some button so thatit could connect to Edit mode in the same formview.Is it necessary to add modechanging and modechanged in the back code?
View 2 RepliesFor ASP.NET, I'm using a DetailsView for insert and edit of a record. For edit mode I don't want to display the primary key field because it should not be changed. For insert mode, I want to display the primary key field because it doesn't exist and the user can specify it via a DropDownList that insures they will pick an unique value. A TemplateField is used in the DetailsView markup for the primary key field (hence the DropDownList for insert mode).
My problem is that I cannot get the primary key field to not display for edit mode and to display for insert mode. In the markup I have:
<asp:TemplateField HeaderText="name" InsertVisible="True" Visible="True">
<InsertItemTemplate>
<asp:DropDownList ID="ddl2NonMembers" runat="server"
Width="155px"
Sourceless="sqlNonMembers"
DataTextField="name"
DataValueField="id_adm"
SelectedValue='<%# Bind("member_grp") %>'>
</asp:DropDownList>
</InsertItemTemplate>
</asp:TemplateField>
With the TemplateField Visible="True", the HeaderText="name" always displays which I don't want for edit mode. With the TemplateField Visible="False", the field never displays which I don't want for insert mode.How can I achieve the display behavior I want for insert verses edit mode. I'm fine with changing some property programmatically rather than relying an a pure markup approach,
I have created a FormView whose defaultmode = "insert". When loaded the FormView displays the InsertItemTemplate. At the top of the page is a DropDownList used to select Clients. I have added a list Item to the DropDownList with value = "0" and text= "Select Client" option. So the Page is in Insert Mode. SO FAR EVERYTHING IS AS EXPECTED.
When I select a Client from the DropDownList, the page remains in Insert Mode (Don't understand why? ) Could it be the default Mode setting? So I added the following vb code.
Protected Sub ddlSelectClient_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles ddlSelectClient.SelectedIndexChanged
If ddlSelectClient.Text <> "(Select Client)" Then
If FormView1.CurrentMode = FormViewMode.Insert Then
FormView1.ChangeMode(FormViewMode.Edit)
End If
End If
End Sub
So after an existing Client is selected, the FormView Mode should be changed to EDIT. AND INDEED THE EDIT ITEM TEMPLATE IS DISPLAYED.
Ah but life is not so simple (after all this is a Microsoft Application). So I enter data in some fields and click the [Update] Button.
Then I get the following message:
FormView 'FormView1' must be in edit mode to update a record.
THe FormView displays the Edit Template, the Update and Cancel Buttons are displayed. All this should mean I am in edit mode.
Just call me FrankenSoft !@#$%^^& or is it MicroStein?
Oh by the way I'm using Linq to SQL data sourcess. Should I be? I'm having a lot of problems with the FormView using Linq.
i have a detailsview in insert mode and that is bound to objectdatasource. now the class that is attached to objectdatasource is :
[Code]....
here ResturantId value has to be in session or from Dropdownlist and rest of the value from Detailview. So how to assign that value?
How do I set the value of a field in a detailsview to the selectedvalue of a gridview on the same page? I am also trying to set today date as value of another field in the detailsview as well as UserID. I wrote the following codebehind for the date setting:
TextBox tb = (TextBox)DetailsView2.FindControl("TextBoxCreDate");
tb.Text=System.DateTime.Now.ToShortDateString();
TextBoxCreDate is a template field in my DetailsView.
Unfortunately, I get a Object reference not set to an instance of an object. Error message.
I'm trying change mode in DetailsView but my program haven't running.
My code:
protected
void DetailsView1_ItemInserting(object sender,
DetailsViewInsertEventArgs e)
{
if(....)
{.........
I am trying to handle the detailsview programmatically but I don't know what I am doing wrong. My details view control isn't going into edit mode. My code for my gridview's select button properly loads the data into the detailsview but once the detailsview renders clicking on "Edit" doesn't switch the detailsview contol into edit mode.
This code draws the information from my database and loads the information into the dataview:
[Code]....
This code is in my dvTeamDetails_ItemCommand sub and the beep works:
[Code]....
This code handles my mode changing event:
[Code]....
Here is some of the HTML code:
[Code]....
I guess I'm not sure exactly how or where to do what I need.
First off - here's what I need - - when the user clicks on the NEW button in the detailsView, I have the User.Identity.name captured in a variable and I need to set one of the textboxes (InsertItemTemplate) named 'txtNew' to that name.
I've tried using the ModeChanging (and ModeChanged) event:
Dim
dv As
TextBox =
CType(DetailsView1.FindControl("txtNew"),
TextBox)
If (e.NewMode =
DetailsViewMode.Insert)
Then ....
However, no matter what, 'dv' always shows as 'Nothing', so I can't change the text of it.
Where do I put the logic and what am I missing?
I currently have a page that is used to insert or update records in a DetailsView using an EntityDataSource control. Insert is working perfectly. However, Updating is not. I have the default view set to insert. In PageLoad, I have:
[Code]....
However, the DetailsView always defaults to the first record in the table rather than the record with ID that is equal to the ID querystring parameter. I am not sure how to make it select the correct record. From spending a while researching, it looks like I might need to use a QueryExtender control on the Entity DataSource, but haven't been able to figure out how to configure the QueryExtender correctly.
There is also perhaps some sort of datasource="stuff", databind() that I could toss in there but again.. not really sure how to proceed.
I have a SQL DB with just 2 fields, ID and TEXT.What i was trying to do, was placing a Detailsview in EDIT MODE, then selecting from the DB like SELEC TOP 1 Text FROM DB.Then i placed a Ajax HTML Editor in the template field.How can i, keep the HTML Editor on the page, and use it for INSERT and/OR EDITING ?e.g.: on the first time the user opens the site management page, it will be blank, so it will show the HTML with no text on it. but the bottom button will be UPDATE and CANCEL. So when he enters the TEXT he clicks on UPDATE.
View 2 RepliesI am trying to update a textbox with the current days date when a checkbox field is checked during Edit of detailsview
The current script I have is which gives me a : Object reference not set to an instance of an object on line 3
[Code]....
I want to populate a detailsview cell by a value from a drop'dn list(based on values from another table).
View 4 Replieswhen a user enters edit mode of my gridview, the girdview becomes huge. How can I make it so my gridview stays relatively close to the size it is when it is not in gridview?
View 1 RepliesI have a gridview and detailsview that are connected. When I delete records everything works fine except when I delete the last record in the gridview. I want the detailsview to revert to insert mode when I delete the last row in the gridview. Instead the detailsview shows up blank. I want to show the detailsview in insert mode after last row in grid has been deleted? How can do I this?
[Code]....
A DetailsView in Insert mode has all fields cleared after events such as the following:
1. Clicking New.
2. Clicking Cancel.
3. Clicking Insert (if the default mode is Insert).
I have some fields linked to ViewState and they are populatd at PreRender event handler. I am wondring if there is a single place where all relevant ViewState elements can be cleared instead of doing this in all possible relevant handlers such as ItemCreated, ItemCanceled, ItemInserted, etc.
I have one GridView called GV_IssTypeDesc and one DetailsView called DV_IssueLog.
The scenario is that i only want GV_IssTypeDesc gridview to appear when DetailsView DV_IssueLog is in edit mode. How do i accomplish this?
I refered to: [URL]
For now i have done the following:
UpdateIssue.aspx
<asp:DetailsView ID="DV_IssueLog" runat="server" Height="50px" Width="400px"
AutoGenerateRows="False" DataKeyNames="dbIssID" OnModeChanging="DV_IssueLog_ModeChanging"
DataSourceID="SqlDS_IssueLog" BackColor="White" BorderColor="#E7E7FF"
BorderStyle="None" BorderWidth="1px" CellPadding="3" GridLines="Horizontal">
<asp:GridView ID="GV_IssTypeDesc" runat="server" AutoGenerateColumns="False"
CellPadding="4" DataSourceID="SqlDS_IssTypeDesc" ForeColor="#333333"
GridLines="None" Visible="false">
UpdateIssue.aspx.vb
Protected Sub DV_IssueLog_ModeChanging(ByVal sender As Object, ByVal e As System.EventArgs)
If e.NewMode = DetailsViewMode.Edit Then
GV_IssTypeDesc.Visible = True
Else
GV_IssTypeDesc.Visible = False
End If
End Sub
The "e.NewMode" is underlined blue in color and it is stated "NewMode is not a member of System.EvntArgs".
How do i solve this problem?
By the way, I am using Web Developer 2008, VB.net.
I'm really struggling with this. How do I display my data with radio buttons in a detail view and bind it to my datasource like I've done with the textbox? The database values are int {yes = 1, no = 0, na = -1}. I want my user to be able to quickly update the radiobuttons instead.I'm working in C#.
<EditItemTemplate>
<asp:TextBox ID="TextBox1" runat="server" Text='<%# Bind("Electrical_Panels_Fastened_Securely") %>' ></asp:TextBox>
[code]...
Is it possible to have an input mask in the detailsview when editing a record?
View 3 RepliesHow would I go about changing gridview colours and detailsview colours depending on who logs onto my website? Is there a way of doing it in the code behind (basic example follows) :-
If User = "Peter" Then
Gridview/Detailsview Headerstyle =
Gridview/Detailsview Controlstyle =
End If
The gridview and detailsview are connected to SqlDataSource controls and are databound to a SQL server database.
i have a DetailsView that is populated by a Linq to Entities query. Example query is below.
Dim leaveApp = From L In db.CompassionateLeaveApplications _
I have a detailsview on my page binding a table with information about the employees. They can update their information. Some info should be visible but not updateable. I could change the update command not updating but I like the control where I can set the column to read only. In that way the employee will find the data visible and they will see that the field/column cannot be changed. But having the column read only will return a null-value into that column when editing and updating anything. Why is that? Shouldn't it just update it's read only value?
View 2 RepliesI have a problem that in DetailsView Edit Mode, if I go to edit fields, and set a fields visible property to false, when I update the record through the built in update options it sends a null value. If I change the field back to visible, it passes the data just fine.
Consequently, I tried just setting the field to Read Only = True, and got the same result even though the current values do show up in the edit mode, just read only.Is there anyway to hide the field but still allow it to pass the data it currently has "BACK" into the record.
I have a details view in asp.net which I am dynamically replacing some of the controls using code behind (e.g. converting some text boxes to dropdowns). My problem is that I am unsure how to bind these to the field from the database on postback. I.e. I am trying to find the code behind equivalent bind('currency');
I can populate the dropdown with the current value from the database but cannot find how to save a new value on updating the detailsview.