Forms Data Controls :: Writing Values Backing Into The Database From The Gridview?
Jun 3, 2010
i just cannot work this out... i have a gridview and when a user clicks on a row the checkbox unchecks itself... when the user clicks the row a sqldatasource.update is called from the selectedindexchanged event, problem is when it writes back to the database it writes back every checkbox as unchecked, i want just the row that's selected...
what i can't work out is i've tried putting a where clause in the sqlcommand which is something like where primarykeyID = gridview1.selectedvalue... now it won't write anything back to the database...!!!
... once i take out the where clause, it writes back to every row..!!
I have a checkbox column in a Gridview that I would like to use to insert the value of one cell in the row into an access database. There will be a maximun of five cells allowed to be selected so there can be one value written to one field in the database up to the maximum of the five fields. The access database has five columns: Selection1 ,Selection2, Selection3 ,Selection4 and Selection5
When the checkbox is checked, the value of one cell (PliD) should be written to each field in the database. Ie: checkbox in row 1 should write PliD value to Selection1, checkbox in row 2 should write PliD value to Selection2, checkbox in row 3 should write PliD value to Selection3 and on depending on which checkbox has been checked. I am not sure how to get the value of the checkbox and write it into the corresponding fields in the database.
At current we have about 100 websites that we host, a lot of those are database drive, what i wanted to do is build a script that would let me enter the details for this website into a DB (domain name, ftp username, password, database name, username and password etc) and then download that website / database on a regular basis
I wanted to do this in .net so i could add it into our intranet and add some reporting so when our clients log into the extranet they can see their website has been copied etc
I have a gridview in a page, and some Texboxes along with a button(for issuing a command) in the same page. The TextBoxs were inputted values and the values could be assigned to the selected row of the gridview, some fields are the same values along the rows, and the values are inputted in the TextBoxes for using several times without change.
Well, I need to know: how can I assign the values of the TextBoxes to the selected row of the gridview. in another words, how can I access the cell members of the gridview when it is in edit mode? (Q1)
If the row is not selected, I have no way to know which row should be assigned values, since there is no such things like "current row".
So, if the selecting button(or link) of the gridview is not selected, the button along with the TextBoxes should keep disabled, until a row's "Edit" button is clicked. (Q2: How can I find if the Edit button is clicked? I guess I can use the property "mode" of the gridview to indicate the situation. )
And the last question is (Q3), how can I ensure the values are updated to the database? Maybe I dont need to do more things than just click the uppdate button of the row of the gridview.
I'm coding my first VB web application, which allows a user to input an order number and pull up invoice and shipping data linkd to that order number.
I have the first bit down and working, where the existing data in the database is displayed in the GridViews. One of the GridViews is set up to allow data editing, and I have syntax set to make the row editable, but I'm struggling with getting the "Update" link/functionality to work. I want to assign the values in each cell to an object (ie. 'dgInvNumber' for Invoice Number), but everything I've tried (been doing a ton of Google searching for help, but no luck yet) keeps giving me an "Object reference not set to an instance of an object" error when I click the Update link for the row of data being edited.
At this point, I don't know what syntax to use to get the edited values out of the GridView row and assigned to objects for each cell (I have a total of 10 cells that can be edited in a row).
For background info, the GridView is set up with Bound Fields. I'm using Visual Studio 2005. Alot of places I've looked talk about TextBox controls and using FindControl. Also seen some places talk about DataBoundLiteral Controls. I tried the latter with no luck (still getting error). For TextBox controls, I don't understand how to use that part, since it mentions referencing the TextBox controls declared in the EditItemTemplates of the TemplateField column fields in the GridView control. But I didn't set up anything in the EditItemTemplates (that I know of).
I have a gridview and users would select some records and would click on the submit button and i will be saving those records into database using a stored proc.... now .... just below the gridview and above the submit button there are few checkboxes by default they wud be checked. How would i save the selected values and the checked boxes in database i wrote the stored proc for the gridview but how would i save the checked checkboxes into the same table.
For i As Integer = 0 To gvSelectScreen.Rows.Count - 1 Dim chkTemp As CheckBox = TryCast(gvSelectScreen.Rows(i).FindControl("cbStatus"), CheckBox) If chkTemp.Checked Then ContractNumber = gvSelectScreen.Rows(i).Cells(0).Text ClientProgramNumber = gvSelectScreen.Rows(i).Cells(1).Text ClientProgramName = gvSelectScreen.Rows(i).Cells(2).Text StartDate = CType(gvSelectScreen.Rows(i).FindControl("txtStartDate"), TextBox).Text EndDate = gvSelectScreen.Rows(i).Cells(5).Text Dim connStr As String = ConfigurationManager.ConnectionStrings("MainConnectionString").ConnectionString Dim myCon As New SqlConnection(connStr) Dim cmd As New SqlCommand("usp_ParametersFromGrid") Dim dt As New DataTable cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@ContractNumber", SqlDbType.VarChar, 22).Value = ContractNumber.ToString() cmd.Parameters.Add("@ClientProgramNumber", SqlDbType.VarChar, 22).Value = ClientProgramNumber.ToString() cmd.Parameters.Add("@ClientProgramName", SqlDbType.VarChar, 100).Value = ClientProgramName.ToString() cmd.Parameters.Add("@StartDate", SqlDbType.VarChar, 20).Value = StartDate.ToString() cmd.Parameters.Add("@EndDate", SqlDbType.VarChar, 20).Value = EndDate.ToString() cmd.Parameters.Add("@RequestID", SqlDbType.VarChar, 50).Value = RequestID.ToString() cmd.Connection = myCon myCon.Open() cmd.ExecuteNonQuery() myCon.Close() End If
Now above the submit button as i said, there are few checkboxes and they are checked by default...how would i save the selected item (in the gridview and the checked checkbox values in the same row in the database(sql server)
i got my checkbox control in each row.actually my problem is i bound checkbox in a gridviw and i need those checkbox are checkd if database values are match.i do it like below
[Code]....
but problem is only one checkbox is checked.in page_Load i bind gridviw in ROwDatabound event i check Duecode in another table.so i need only matching checkbox should be checked.
I was just wondering that when we insert some datainto database we can use the following method.
create a sql datasourse , set the conection string, set the insert comand type, set insert parameters, and Set the SQL Statement like sqldatasource.insertStatement="insert into tablename(field1, field2) values(@parameter1, @parameter2)";
and then call the datasourse insert() function, this method is usually used for single line insertion at the end of the DB.
Now I am a starter in asp.net c#,
I want to know that if There is a way that I have lots of data like some XML file that have the same table structure as the SQL database table and I want to write that data to the database, HOw to do it Properly,
I can Still achieve the required results by iterating through XML datarows and for each row conecting to db and inserting and then disconecting dfrom the db,
But I want to know that if there is a way to do it in one go meaning I have to conect to database only one time,
Note: I already have some data in my SQL table, there are three fields(ID Name and Nickname) the ID(primary key) is INT type and auto incremented, the name and nickname are strigns. the xml file has the structure
Using SQL and C#. I have a gridview with a template field. I need to modify the some items in the gridview when the user selects a given record and store the values back in the database. ProjectID is the unique key in the database.Gridview is done as a table. How can I do it? Here is my grid view implementation.
how to change gridview cell value for a checked row without affecting any changes in database for ex if a row contains quantity of item 6 i want to change it value to 5,4 upto 0 that is on click event of delete quantity button i have identified row with a checkbox in grid view.
I copy in a DataTable a GridView to display this GridView in a another page. It works but the gridview's content is not encoded in UTF-8.
This is the code which copy the gridview in a DataTable :
protected void ButtonDisplay_Click(object sender, EventArgs e) { // On copie dans un DataTable toute GridView filtré DataTable dt = new DataTable(); for (int i = 0; i < GridView1.Columns.Count; i++)
I have a gridview inside which there are 4-5 checkboxes. In that gridview, I have 10 rows too. So, Now what i want is.
IF I check, 2 checkboxes and don't check remaining checkboxes. how to save the value of the checked checkboxes value as Y and unchecked checkboxes value as N into the database.
I am trying to generate a Grid view from database, in one of my database columns the values are 'y' and 'N'. and i need to show this values in a check box .I tried to keep a check box in item template and tried to bind it, but could get much success.
i take data from Sqlserver database , and my prblem is that i want to get old and new values from gridview and base on that i want to change there background colors .. i try gridview rowupdating , editing ,updated Events but when i debug no break point hit and there was no value in ViewSate that i declare ,
I have an ASP.NET app that writes binary data to a SQL database. It worked fine using SQL Express, but does not ever write the data using SQL Server 2008 R2. SQL Profiler shows the binary data in the UPDATE query, but nothing happens... no errors, no data saved. Does anyone know what I'm missing? Other data types work fine.
Using a class component, an Object data source and a formview I am successfully pulliing data from a SQL database. In some cases the rows contain one or more Null values and I would like them to be ignored completely. My simple code follows:-
Just dipping my toe with doing simple VB.NET stuff. Have used classic ASP, so im used to being able to place any field from a recordset whereever i want to putit , and i have just tried to recreate this event.Its got me a bit lost.. now i have read up and understand why it doesnt work - cant use DataItem in a HeaderTemplate - i get that, but how would you do something where you have complete control of the way the table is being set up? and you can use the contents of the container whereever you want, however you want?I just want to be able to get the values from database table, and put them into an html table, in a specific way.
I am creating an insert statement in my c# code to insert records to an access database table. I am getting the error copied below using c# code. When I copy the generated insert statement from the console and run this on my access database, it succesfully appends a record in the table.Insert statement generated:
