I have a gridview which has rows of 'tickets'. A user has the ability to 'claim' a ticket, this is all set up and works. What i need is to be able to change/hide the 'claim' button and replace it with a 'release' or 'open' command button. Can i achieve this at a rowdatabound level? What i do not want is to query the db everytime to see if the ticket is claimed.
View 1 RepliesI have two command buttons in my gridview that I need to set tooltips for. Both buttons show as an image and I need to fix it so it show a message like 'Click here to edit'. The gridview control is databound and I have the all of the functionality of it working, I just need to be able to do this.
View 10 RepliesI'm customizing a NopCommerce store, and am using a gridview to display and sort the products. All that works well. I like how the external pager (user control) works with the gridview, with one exception -- it uses the hyperlink control, so I lost viewstate, which I need to retain for both the search page and to retain the gridview sort options. Based on the page selected (from the pager control), I query the database and rebind the gridview. So, I switched the user control to use LinkButtons instead of Hyperlinks. This is the sample code for one of the buttons:
[Code]....
I set a breakpoint inside the lbCommandClick method, but it never gets hit. Reading other posts tells me that I would have to add the dynamic controls in the OnLoad method, but since this all happens based on other data on the page (say search results), I don't think I can do it onLoad. However, the link buttons do work to cause a postback, and my viewstate is saved correctly. The only problem is that I do not know which button was clicked. I could check Request.Params["__EVENTTARGET"] onLoad, but that is kind of a hack -- I'd much rather be able to set the event handler in the user control and use the CommandArgument property. But, what I have tried so far fails.
Especially one that would allow me to set the EventHandler in the User Control? (e.g. OnlbCommand="PagerLBPageChange" )
I'm looking for the best design solution in relation to the following scenario:
<form>
<repeater>
<itemtemplate>
<usercontrol>
</itemtemplate>
</repeater>
submit button
</form>
The user control is a series of 5 buttons (similar to a radio button list) where only the latest button is recorded. I.e. if you click button 3 and then button 5, button 5's value is stored. The repeater can have a number of usercontrols, varying in numbers. The typical number if 5/6. When the submit button is pressed, the form needs to collect information from all user comtrols I.e. the database id of the control and the final value. The values will be processed later. At this point i'm looking at the best way of validating values, ensuring that all controls have a value and passing them onto the buttons command argument.
my question is how can we call a button that is in a specific specific column and row of a datagrid??i try with this but an error of out of index occursDatagrid1.Items.Item(0).cells(0).FindControl("diagrafi").Visible = False
View 7 RepliesI have created a wizard control. Now i would like hide all the Navigationbuttons, for example
- stepPreviousButton
- FinishPreviousButton etc.
How can i do than in my code-behind?
I have two asp.net buttons inside a template (Expand and Collapse) I want to implement a simple client side javascript function to hide the expand button after press it and show the collapse button and vice versa.
<asp:Button ID="btnExpand" runat="server" CommandName="Expand"
CommandArgument='<%# Container.DataElement("Id")%>' Text="+" />
<asp:Button ID="btnCollapse" runat="server" CommandName="Collapse"
CommandArgument='<%# Container.DataElement("Id")%>' Text="-" />
I tried OnClientClick event but I didn't know how to get the sender button and the second button from javascipt because they're in a template and their IDs will be generated.
I tried also to change their visibility from the code behind in the server (by Visible property) but the problems is the event handler will be fired after the postback and the changes will not be applied in the client.
I am using Fullcalendar on my site and I have a button to print it. I am doing this with:
function print_calendar() {
$('#calendar').css('width', '6.5in');
$('.fc-content .fc-state-highlight').css('background', '#ccc');
$('#calendar').fullCalendar('render');
bdhtml = window.document.body.innerHTML;
sprnstr = "<!--startprint-->";
eprnstr = "<!--endprint-->";
prnhtml = bdhtml.substr(bdhtml.indexOf(sprnstr) + 17);
prnhtml = prnhtml.substring(0, prnhtml.indexOf(eprnstr));
window.document.body.innerHTML = prnhtml;
window.print();
Now I also want to be able to hide the Previous Month, Next Month, Today, and Month Buttons. How can I do this via javascript? I do not want to change them in the fullcalendar code, just be able to hide them before printing but have them display the rest of the time.
Whats the easiest method of hiding all buttons but not all inputs (say drop down lists, text input boxes) in CSS that works with IE6. The purpose of this CSS file is for printing (using the media="Print" tag in the HTML).
View 2 Replieshow would i do my Gridview delete command like a update command?
im using a datasource... and my delete command is like my update command... so i can change the status into "INACTIVE"...
DeleteCommand="UPDATE ACCOUNT_MAINTENANCE SET am_status = 'INACTIVE' WHERE (accmain_no = @accmain_no)"
UpdateCommand="UPDATE [ACCOUNT_MAINTENANCE] SET [account_type] = UPPER(@account_type), [min_deposit] = @min_deposit, [min_capital] = @min_capital WHERE [accmain_no] = @accmain_no"
when i press my delete command at gridview... the status changed into "INACTIVE" but when i refresh or press f5... it automatically update the status into "INACTIVE" also...
I want to issue an INSERT command for an SQL Server table using DataAdapter without first issuing a SELECT command. Could anybody send me lines of code to handle this? Also how do i manage INSERT into selective table columns (I have 10 columns but i only want to update 2 of them)?
View 2 RepliesI am working with odbcCommand class, in one case I got error that QueryTimeout Expired. Even though this SP is taking only 3-4 secs in DB to execute these specific values, When I set the CommandTimeout=0, then it worked fine.
1)Is it necessary to always use this property while working with Command Class.
2)If it is not suggested to use, but still if I use it then how it will impact the performance.
Below is my code sample.
OdbcConnection conObj;
OdbcCommand cmdObj;
OdbcDataAdapter daObj = new OdbcDataAdapter();
public DataTable GetIFAContractNoteData(string RecipientIDIFACN, DateTime BatchDateIFACN, int TransmittalReportIDIFACN) {
conObj = new OdbcConnection(GlobalVariables.strDsnName + ";" + GlobalVariables.strDsnDataBase + ";" + GlobalVariables.strDsnUserID + ";" + GlobalVariables.strDsnPassword);
[code]....
[Code]....
Using above code, I got succeeded in printing PDF file through command line. But it runs the Acrobat Reader and opens Save dialog box.
In my case, I want to suppress Save dialog box and save the file on other location using c# coding. I mean I want to save a PDF file behind the scene.
In my form i have three radio buttons and nine image buttons, three image buttons per radio buttons
If the user check one radio button, the respective three image buttons only has to be displayed.
In a single time one radio button only can be checked the rest two would be unchecked
Here i have pasted the aspx file design source
[Code]....
How to use radio buttons in grid view. i used asp:radiob button but the problem is that it selects all the radio buttons in the list how to select only one radio button at a time
View 3 RepliesWhat's the best way to handle three radio buttons on a page and when they are clicked the gridview will populate? I only want to use one gridview.
View 1 RepliesI've recently started working in ASP.NET and RDBMS.I'm making a test form where I can do basic add,update,delete operations.I'm using OracleDataClient to do the DB operations.I was able to populate a listbox using OracleDataAdapter.
Now after clicking on update button,I intend to Update in DB.I've Dataadapter with it's update property.But the update query is not happening.The examples I saw over net all have Select command before Update.Is it actually like that or am I missing some point.
How does Oracle DataClient work with Insert,Update,Delete Commands.
I want to add a column to a gridview which contains button control. I am using ID(integer and primary key) as the 1st column of Gridview. What I want is that when a user clicks the button on any given row of gridview, I want to able to determine the ID of the row to which the clicked button belongs
View 3 RepliesI am using buttons for paging in my gridview, but they will not center
[Code]....
and the CSS also has text-align:center , but they still hang left.
I've implemented group and grand totals on a gridview as per [URL].
My problem is that the last few link buttons does not function correctly (in this case ID 11 and 12) when I click on them. I am thinking that it could be because of the manual rows being added and then throwing out the links for the other rows, but I honestly don't know what is causing it.
So if you look at my example clicking on the link buttons for IDs 1 through 10 they all redirect correctly as for example detailsPage.aspx?q=4 when I click on ID 4, but when I click on link button 11 or 12 it just reloads the page removes with totals removed and some blank rows in between.
i have grid view like this
Code:
<asp:DataList ID="DataList1" runat="server" Width="200%" >
<ItemTemplate>
[code]....
it has been fire two times ,measn code written inside it work twice ,
i have a button in gridview whose command name is "hold" i want when i click n hold button of first row then the whole row values will be transfererd to default2.aspx ...
and if i click the hold button of gridview second row then the second row value will be transferred to Default2.aspx ,,how to do that ?
i m using that ...but it always transfer the 1st row value even i select first last or middle row ..in gridview ....
whats wrong in this code ?
[code]....
I have 2 gridviews they are bind by sqldatasource ,it contains Id , Name and Price
i dont want to show ID coloumn when page is loaded.How to hide it?
I am a complete noob to ASP.NET (C# based) and have migrated from PHP (I have mentioned this a few times but I feel I have to 'cos some of the questions I ask seem so basic!)
I have page (Products.aspx) it has a grid view using products from the northwind DB, the grid view is paged to show 'n' products at a time and has an extra column which is basically a 'view this product' hyper link, the user can click on this link and is taken to another page (Product.aspx) which provides complete details for that particular product, so, this is what I want to do next, I want to add a button that takes the product ID, (or other unique property of the product - it doesnt really matter at the moment, but i am likely to stick to ID).
Then take that value and place it in a cookie, (I know that session variables are held in cookies, that is not really a problem at the moment, I am concentrating on basics, then I will go a little more advanced).
so, I have a button - call it productIdBtn, and its value, which is going to be the product ID, in the button on click handler, how would I add this value to a cookie - call it prodIdCookie?
I am having to re-learn everything from the ground up and because PHP is so simple to write (mainly because of its weak typing),
Can the page numbers (clickable) at the bottom of a gridview pager be accessed programmatically as buttons?asp.net 3.0 c#
View 1 Replies