MVC :: How To Run A Test And When It Returns A View When ModelState Is Invalid - Nothing Shows Up
Jul 26, 2010
I've been working with MVC 2 for awhile and ive done ReturnToAction as well as ValidationSummary - but this is a little different in that my "submit" buttons are controls by javascript/JQuery - i debug the action and it does go into the correct Controller Action but once it passes over RedirecToAction, nothing happens....
My second problem is that my ValidationSummary fails to show - i run a test and when it returns a View when ModelState is invalid - nothing shows up
Is it a problem with my buttons/forms/submit/JQuery?
[Code]....
And the Controller looks like this:
[Code]....
My Services handle things like validation, I pass it the ModelState and a ModelStateDictionary wrapper and add errors - am i adding errors incorrectly?
[Code]....
View 4 Replies
Similar Messages:
Mar 18, 2010
After wading through quite a few articles on creating modal forms (using partial views and jquery) I got things working fine for my login....as long as you enter a valid login though!
What I did:
Created a partial view containing my login form.
In my action controller, the get action just return a PartialViewResult, which get dealt with by a bit of jQuery in my master:[Code]....
Like I said this works fine. Now the post action of my login check if it's a valid login, and if so send the user to the passed returnurl or the home page.
However, if the validation fails, I now return the partial view again, which work , but the partial get displayed by itself instead of rendering in the modal form that was opened by jquery.
View 4 Replies
Jan 21, 2011
I have used IValidateObject successfully using a strongly typed view using HTML Helpers. When I hand code a view, still using a strongly type view, but no HTML/AJAX helpers, e.g.
[Code]....
Note: I am also handcoding the ajax and validation js.
When I post back to the Controller, even though the model data is correct, the ModelState is always invalid, having delved into the ModelState and found the error, it is always on the Model property where the IValidateObject.Validate is used. If I stop implementing the IValidObject on my model it all works fine, but I lose my IValidObject.Validate validation rules. Is there something I can do about this, what determines and at what point does .NET check validity of the ModelState? Presumably I am missing something that needs to be set on the ModelState and is not happening as I am hand coding the views/js.
View 2 Replies
Mar 9, 2010
I'd like to disable ModelState validation messages and keep my data annotation error messages.
When I update model, message "The value '' is invalid." apears in ModelState. I know that I'm trying to assign null to not nullable property, but I have my own validation and message.
I use something like this
[Required(ErrorMessage="Blahblah some error")]
I want user to see my message "Blahblah some error", but not stupid message: The value '' is invalid.
View 6 Replies
Mar 19, 2011
Got a nullable datetime member on my viewmodel.the moment it hit my controller action, the viewmodel's modelstate allready are invalid (because the member is null).Forgot...how that works? (using MVC2)Basically my viewmodel have a social security number, passport number and passport expiracy date.If the ssn is entered, I want to ignore the two passport related fields, so I made the expiracy date member nullable.
Like all other viewmodels in this app, each model have it's own validation function that will do validation, and in there I add an error that the date is required or not valid (if using passport number). mvc itself should not care about the date at all.I dont want to give the date a default value, because then the date will show when the form loads, and it must be an empty field (unless I already got a date of course.
View 4 Replies
Feb 25, 2010
I've written a View (form) that has a section with two radio buttons and a blank <DIV> block that will dynamically be updated. When one radio button is clicked, a <DIV> on the page is updated with fields specific to that radio button option. When the other radio button is clicked, the <DIV> on the page is updated with fields specific to that radio button option. To determine what content gets displayed when a radio option is selected, I call a JavaScript function and set the content appropriately using jQuery. Pretty easy so far. Let's assume that the User has toggled the radio buttons and filled in some data. Further down in the form, the User has entered an invalid e-mail address. When the User submits the View, the ModelState is invalid. If it is invalid, I return the View.
[Code]....
Problem is, when the View is returned, some of the form fields (that are static) are in place. However, the <DIV> that was previously updated based on User radio button selections is reset to its original state. When we return a View because of an invalid Model State, is MVC smart enough to return the View in it's modified state (in this case, with the modified DIV and dynamically added content)?
View 2 Replies
Jan 17, 2011
My problem is that though there are values in the modelstate, the error messages are not being displayed in the View. What is wrong with my code?
[Code]....
View 6 Replies
Oct 18, 2010
for debugging purposes, how do I see the ModelState errors from code in the action method? ModelState.IsValid returns false. I want to copy the error messages to a variable so I can display them in the debugger.
View 2 Replies
Apr 12, 2010
here is my code:
My sql query is returning 2 rows by my repeater is only displaying 1.
[Code]....
View 3 Replies
Mar 30, 2010
The reCaptcha example for ASP.NET does not seem to work. I followed the instructions but it always returns false, "The verification words are incorrect.". The entries are good. I'm using localhost as the site but am not getting any public/private key errors which I did get when adding a bad key (as a test).I've seen this error reported a lot but no good answers. Some suggest to call the validate on the control before checking to see if it is valid but this did not work for me.
View 2 Replies
Aug 18, 2010
I am writting a client applicatin that acesses a webservice written by another company. I need to test against this webservice but since it is live I need another place to test with. I don't have access to the code from the webservice but have added a reference to my project. I would like to create a test platform using C# which will run on IIS and not Java. I have created a basic webserive using both the NetBeans platform and the VS/C# platform. The problem I am having is if I dynamically change the web address from one to the other my client application complains that the webservice is invalid. I have verified all the calls are the same.
Are there any setting with VS/C# that allow me to configure it to behave more like the Java webservice? I don't have the server support to host the Java application for full testing along with other problems using the Java version. I have run both services in the "WCF Test Client" and can see where the WCF service uses the varibles for request and the Java uses body/request but can't get the WCF to follow that format. I read somewhere about changing the OperationContract with SoapRpcMethod but then the mentod is not longer exposed. I also tried a Web Service in .NET 3.5 instead of a WCF server but that seems to be more trouble and does not help.
Error message:
The message with Action '' cannot be processed at the receiver, due to a ContractFilter mismatch at the EndpointDispatcher. This may be because of either a contract mismatch (mismatched Actions between sender and receiver) or a binding/security mismatch between the sender and the receiver. Check that sender and receiver have the same contract and the same binding (including security requirements, e.g. Message, Transport, None).
View 7 Replies
Apr 15, 2010
I have managed to expose the MEX endpoint of my WCF service and I can access it with the address like [URL] (example) and get the WDSL. So no problem there.
However, my WCF test page shows the address wrongly by using the server's name instead of the DNS name. And if I click on the link on the test page it won't work (can't get WSDL).
The WCF test page looks like this:
MyService Service
You have created a service.
To test this service, you will need to create a client and use it to call the service.
[URL]
The WCF service is hosted in IIS6. I would like to have a test page with the correct WSDL address so users can see the WSDL quickly in the browser just by clicking on the WSDL address.
In short: How can I change the MyServerName to inter.mycompany.com on the WCF test page? Can this be specified somewhere in the Web.config?
View 3 Replies
Apr 29, 2010
Lets say I have a simple controller for ASP.NET MVC I want to test. I want to test that a controller action (Foo, in this case) simply returns a link to another action (Bar, in this case).How would you test TestController.Foo? (either the first or second link)
My implementation has the same link twice. One passes the url throw ViewData[]. This seems more testable to me, as I can check the ViewData collection returned from Foo(). Even this way though, I don't know how to validate the url itself without making dependencies on routing.The controller:
public class TestController : Controller
{
public ActionResult Foo()[code].....
View 1 Replies
Jan 8, 2011
I have an Error in the design view when I use the ajax toolkit. it says rendering Control Accordion - An unhandled exception has occurred. Collection was modified; enumeration operation may not execute. I have the relevant service pack, download ajax toolkit and I have used the appropriate declerations on the top of the page, I hope. I haven't yet even put anything on the page and the designer view shows the above error.
<%@ Page Language="vb" AutoEventWireup="false" MasterPageFile="~/Site.Master" CodeBehind="listaccessoriesbytype.aspx.vb" Inherits="FashionPrototypeProject.listaccessoriesbytype"
title="Untitled Page" %>
<%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="cc1" %>
<asp:Content ID="Content1" ContentPlaceHolderID="head" runat="server">
</asp:Content>
<asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolder1" runat="server">
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager>
<cc1:Accordion ID="Accordion1" runat="server">
<Panes>
<cc1:AccordionPane ID="ac" runat="server">
<Header></Header>
<Content></Content>
</cc1:AccordionPane>
</Panes>
</cc1:Accordion>
</asp:Content>
I entered this manually in my webconfig: added this under the rest of asssemblies code
<assemblies>
<add assembly="AjaxControlToolkit, Version=3.0.30930.28736, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e"/>
</assemblies>
added under the rest of controls
<controls>
<add tagPrefix="ajaxToolkit" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit, Version=3.0.30930.28736, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e"/>
</controls>
View 3 Replies
Mar 8, 2011
Is there any limit on the size/numbers in the version number of the FormsAuthenticationTicket.
I tried to create an ASP.NET cookie using forms authentication, with a large version number(ex: 1234567 need this number for identification purposes). But when I decrypt the cookie I get 135 as the version number.
Initially the old forms authentication cookie was removed, in order to add new information.
Response.Cookies.Remove(FormsAuthentication.FormsCookieName);
Following is the code I used to create the FormsAuthentication cookie.
FormsAuthenticationTicket newAuthTicket = new FormsAuthenticationTicket(1234567, un, DateTime.Now, DateTime.Now.AddHours(5F), false, user_data);
HttpCookie newauthCookie = new HttpCookie(FormsAuthentication.FormsCookieName, FormsAuthentication.Encrypt(newAuthTicket));
Response.Cookies.Add(newauthCookie);
After retrieving the cookie, the version number I got was 135. This number varies with different version numbers.
string cookieName = FormsAuthentication.FormsCookieName;
HttpCookie authCookie = Context.Request.Cookies[cookieName];
if (authCookie == null)
{
return;
}
FormsAuthenticationTicket authTkt = null;
authTkt = FormsAuthentication.Decrypt(authCookie.Value);
if (authTkt == null)
{
return;
}
int versionID = authTkt.Version;
Can someone let me know if it's a bad idea to use such big version numbers, or am I missing something in this.
View 1 Replies
Jul 4, 2010
how to hyperlink the database table (which shows in gird view in next page)
View 4 Replies
Mar 11, 2011
Is it possible to write unit tests against razor view in MVC 3? If yes, can anyone point me to code sample to unit test a razor view in MVC 3?
View 2 Replies
Feb 19, 2010
I am using Moq for unit testing and I would like to test for a view's attribute.In this case the Authorize attribute.Example View Code:
[Authorize(Roles = "UserAdmin")]
public virtual ActionResult AddUser()
{
[code]...
View 2 Replies
Mar 18, 2010
iam using grid view.i am using in it one templete filed like image button.i want when i click on image.the id which i want to pass passes and new pop up window is open and shows details....can i use Row databound or RowCreated which is better to setting onclick event on each image...if i would success on this i get associate id,s of each row.
View 2 Replies
Oct 20, 2010
If the password is invalid, how can I show "Invalid Password"on view ?
View
[Code]....
Controller
[Code]....
View 2 Replies
Feb 19, 2011
Would like to add a third party test framework (such as NUnit or MbUnit) to the drop-down list of test projects for the ASP.NET MVC3 type project in Visual Studio 2010.
This had worked before for ASP.NET MVC2 and prior, but the msdn instructions are not accurate and does not work. Creating the registry keys in the HKEY_CURRENT_USER seem to delete the keys every time the VS-2010 starts, the HKEY_LOCAL_MACHINE does not follow the same tree structure.
how to add a third party framework under ASP.NET MVC3?
View 3 Replies
Nov 29, 2013
I have detailsview control with bound fields...some usingĀ Templatefields. I am trying to access values in those fields but i get nulls....i really dont know why..I am proving all my code....
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Projects.aspx.vb" Inherits="Projects" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head id="Head1" runat="server">
<title>Projects Statuses</title>
[code]....
I guess something might be getting messy with the mode changing event... a postback? But if i remove the databinding code, i get an error! why find control returns null??
View 1 Replies
Feb 26, 2010
I'm creating a app that uses a Master Page.
But when i go to Design View of the page (for creating the events automatically or for drag/drop any new control from toolbox, I don't want to type everything) the design view only shows the master page! the page controls are complete ignored!
the image: [URL]
View 2 Replies
Jul 24, 2010
i have in grid view that grid view have very long string. when i export grid view export in excel it that string shows in single line
View 1 Replies
May 31, 2010
i have a some Records in My Data table. i want to get Distinct Records so i have used data View for That. when i look in into DataTable.DefaultView it Shows Empty.
i have Cleared the RowFilter of this Default View.
View 2 Replies