I have created MVC 2.0 application and added one view called default. The application runs fine. I set this as a start page and tried to run the application. It gives HTTP 404 error. I again set back the Index.aspx as start page but it didn't work. What colud be the error?
View 2 RepliesWhen i created a simple site via Matrix which adopts Razor technology by default, i found site automatically display "default.cshtml" if started through "http://localhost:xxxx/bread/" ; however i hadn't set "default.cshtml" as "default document" for this site, even i seek in the "applicationhost.config" i just find
<defaultDocument enabled="true">
<files>
<add value="Default.htm" />
<add value="Default.asp" />
<add value="index.htm" />
<add value="index.html" />
<add value="iisstart.htm" />
<add value="default.aspx" />
</files>
</defaultDocument>
which apparently hasn't "...cshtml" yet. So I am wondering now why in this case the web server actively sets "default.cshtml" as default start page ?
Here is my scenario.In default.aspx page user selects the country, state, city from drop down list, and store them in cache for further use. but when other user open the web site from other computer it shows the same country, state, and city selected by user 1. Is there any problem related to cache? I have stored data as following.
cache["ctryID"] = ctryID;
cache["stateID"]= stateID;
cache["cityID"]= cityID;
I want to show default country, state , city at page load of default.aspx
I have two webpages. Default.aspx and Default2.aspx
No code written in both pages.
I put an imagebutton without imageurl in Default2.aspx
The control is redirected to Default.aspx when Default2.aspx requests...
How does this happen?
I need to force SSL when going to the final checkout page (for example from default.aspx to checkout.aspx).
I need to pass variables to this check out page and tried to use server.transfer(https://www.mydomain.com/checkout.aspx). I then use previous page .Fincontrol to read text box and label name to this check out page. If I only do the server.transfer("~/checkout.aspx") then my I can read all vakues of my controls from the passing default.aspx page.
But when I force https:// then I cannot read the control values from default.aspx page.
Please give me some tips on how to get control values to the https:// destination page or if you have another tips on how to do it the right way, please let me know.
I have a Asp.Net application eg its name is ABC and I have a server eg whose name is XYZ, where the application is hosted from. The default page for the application is Home.aspx.Now the requirement is I want Home.aspx to open automatically when the server name is typed in the URL. Currently for accessing the Home page I writehttp://XYX/ABC/Home.aspx but I want Home.aspx to open if I writettp://XYZCan anyone suggest how I can achieve this. I have one solution that is making a HTML page as default in IIS and then redirecting it to the respective link.
View 5 Repliesexactly like cms , i want to create page programmatically with this options:1: page-name2: add template (master-page)and etc...
View 6 RepliesI have a master page that has a text box at the top with a couple of words in it. Below that I have a horizontal menu and below that there is the content place holder.I wish to set a default background color on the master page so that each other web page that uses this master page will inherit this background color.How do you do set a background color on the master page?I can't seem to select the background to set a default background color because the controls I have placed already.
View 4 RepliesI have created an order checkout page.when i click checkout button then it check user login or not if not then it redirect to login page .after login i want to show
my previous link page
A website's default page is setup as follows:http://mysite.com/myapp/ ==> http://mysite.com/myapp/views/default.aspxAs you can see the only thing a little out of the ordinary is that the default page is in a subdirectory (views)If I access the page via the default URL (http://mysite.com/myapp/) the form tag looks like this<form name="aspnetForm" method="post" action="default.aspx" id="aspnetForm">The problem is that the page posts back to http://mysite.com/myapp/default.aspx (missing the "/views/" part of the path) which is a non-existent page, so I get a Page Not Found (404) error.
View 1 RepliesI have a small part of my page existing on the master page. this small portion is embeded within an update panel that I postback using asynchronus postback. The problem is that; my default.aspx page which uses the master page gets affected (i.e I lost the text in the textboxes) on the asynchronus postback although the update panel doesn't include these textboxes. Is there a solution to ensure that postback only affects this part of the page?
View 5 Repliesvs 2010, sql server 2008
I want login page code.my code is not working.
I have user table with username and password.
obj = new common();
con = new SqlConnection();
con = obj.getconnection();
SqlCommand cmd = new SqlCommand();
SqlDataReader rd;
cmd.Connection = con;
con.Open();
cmd.CommandText = "select username,password from user where username =@username and password=@password";
[CODE]..
when username and password is correct , it should redirect to default page.
Suppose I have a server wid some virtual name as ABC. And also I have a .Net web application XYZ with some .aspx pages like Home.aspx etc. Now if I want to make Home.aspx page as the default page when I type the server name in brower the Home.aspx opens automatically.
Currently Iam accessing the application with this URL
https://ABC/XYZ/Home.aspx
But I want to access the application in this way:
http://ABC
I am trying to create a website containing an application written in Silverlight. Because of SEO, I want to have this Silverlight application on one page of the site, whereas the other pages are ASP.NET MVC, explaining about the application, general info, etc.
I was able to find an example on how to add a silverlight application to an ASP.NET MVC view. Basically, I just have to add:[Code]....
to the <asp:Content> block.
However, this only seems to work if this snippet is added to the default page (/Home/Index in case of an out-of-the box ASP.NET MVC application). If I add the same snippet to, for example, the About.aspx page, nothing shows up. If I make the About page the default page by changing the route to:
[Code]....
then the Silverlight application is launched on the About page (now the default page), but no longer on the Home page.So my question is, how can I get my Silverlight application to launch on any page in my ASP.NET MVC aplication, not just the default page?
I have a sitemappath that I want to surpress on the home page of a website. Assuming the homepage is "www.mysite.com/default.aspx", what is the best way to detect when the base URL is being displayed?
IOW: I can do something like:
if request.servervariables("url") = "/default.aspx" then
sitemappath1.visible=false
end if
but how do I detect when the default url is being used, like:
www.mysite.com
without a page url at the end?
if a request from my website is containing some errors(database linking errors) then asp.net host server error page is displaying but i want to avoid the error page and i hav to display my own custom designed error page instead.
View 4 RepliesHow can i set different default document for each folder in my asp.net project.I have set a default document from IIS, but that doesn't show up for every folder browsed.I have already added HTMLs to the collection but they are not showing up, instead stander ed Forbidden error page shows up.
View 2 RepliesI have been trying to set the default url but it is not redirecting to the page that I want. The defaultUrl="admin/Home.aspx" is keeping redirecting back to the login.aspx Below is the code i am doing in the web.config
<authentication mode="Forms">
<forms loginUrl="~/Login.aspx" timeout="20" defaultUrl="admin/Home.aspx" />
</authentication>
the url after being redirected is as follows
/Login.aspx?ReturnUrl=%2fadmin%2fHome.aspx
what do the %2f mean?
Is there a generic way out there to find out which page of an asp.net 3.5 application running under IIS 6.0 (yea I know boring stuff) is the default one so I can do something like this:
Response.Redirect(Helper.GetDefaultPage());
How to get the default.aspx as the home page when i am ping as www.test.com in web broeseri have tried so many ways but aim not getting the result...
View 1 RepliesLet me start by saying I'm a newbie to this .Net development and I'm currently assigned to crack into an old ASP.NET v1.134 website source to rebuild it. The website is part of a solution consisting of 11 projects. The website project where the default.aspx is located, say projA, has a project file called projA.csproj with the url [URL] in it. There's another suspicious project file called appname.csproj I found in the same folder with the url [URL]. The website configuration file has [URL]. Now in the IIS the virtual directories for a default website called projA and another one called appname are set up pointing to the same local directory for this website. When I browse into projA in IIS the default.htm doesn't come up. When I tried to initiate a debug instance in VS .Net 2003 for this website project I have the same issue with the starting page, or any page for that matter, not showing up on the browser (IE) brought up by the debugger. I know the localhost is working because I can see the IIS page when I type [URL]. But when I type [URL] or [URL] it won't work. If I type [URL] some default page came up (I don't even know where it is but it looks similar to the default page!) but all the links on it are not working. I did some research on the web and I made sure these things are done:
1. Put localhost into the trusted zone in internet security options.
2. Used integrated Windows authentication.
3. Deleted those default websites in IIS and created new ones, albeit with the same results.
4. Made sure the correct .Net version is used in IIS website properties. I know it works because the debugger does come up with no errors.
5. The entire solution for those 11 projects is rebuilt with no errors. I also rebuilt projA a few times to make sure it's compiled correctly.
I have a asp.net web project in which I am trying to view the Default.designer.vb page. I thought there was a button at the top of the Solution Explorer that would allow you to show the "Designer" files but I don't see it. How can I view these files?
View 5 Repliesi have two master pages, when the user logins it should set first master page as default master page . If other login it should set second master page .
View 2 Replies[Code]....
View 3 RepliesIIS6, ASP.NET 2.0, No Forms Authentication I'm calling Response.Redirect("~/foo.aspx"), but the default document ("Default.aspx") for my site is appearing. To make matters worse, it only happens intermittently. Sometimes the redirect displays the right page.
I've checked session state, and I don't see any values in the web.config (that is, I'm assuming I'm using the 20-minute defaults).
There's foo.aspx and foo2.aspx (and the default document, Default.aspx). All pages extend from BasePage, which extends Page.
BasePage has a property named ReturnPage:
protected string ReturnPage {
get {
if (Session["ReturnPage"] == null) {
Session["ReturnPage"] = "";
}
return Session["ReturnPage"].ToString();
}
set { Session["ReturnPage"] = value; }
}
Users click on a LinkButton on foo.aspx, and the click event handler ends with two lines of code:
ReturnPage = ResolveUrl("~/foo.aspx");
Response.Redirect(ResolveUrl("~/foo2.aspx"));
The Page_Load of foo2.aspx has problems, and its error handling calls Response.Redirect(ReturnPage).
When I view the response headers of foo2.aspx, the 302 location is string.Empty (that is, there isn't one). That same response header has the same ASP.NET Session ID as the response of foo.aspx.
And remember -- this is intermittent. Sometimes, you can click on that LinkButton and go effortlessly to foo2.aspx, no problem. You can process the click with the exact same data once, and it will fail. You'll navigate from the default document (Default.aspx, where you were sent by the "bug") back to foo.aspx, click again with the same data (the same row in the grid/table -- the same LinkButton, essentially), and you'll be redirected to foo2.aspx without issue.