I have HandleError attribute working normally, however:
I have a jqueryui dialog that displays a partial view. If i generate an error in this action the dialog just remains blank and no redirect to the Error.aspx page.
i wanna use HandleError attribute on my Controller. but it doesn't work .
here's my sample:
[Code]....
[Code]....
I am experimenting with the relationship between Elmah and MVC's plumbed in exception handling, and am surprised at the outcome of the following code. This is a brand new, straight from project template MVC application, and I have only added Elmah modules and handlers to the web.config.
[Code]....
Break when error is thrown is set to off, yet the debugger still breaks. When I continue I get a YSOD, and an Elmah error log, but it seems HandleError is doing nothing.
JUST IN I didn't think I had to have custom errors turned on, as I thought that was only for 'my' unhandled errors.
Does [HandleError] attribute in MVC replaces the traditional try catch exception handling?
As I have seen codes in controllers where the top line of code is [HandleError] also I have not seen much of try catch in the code of the application I am working on.
I'm using the Google CDN to load my JQuery file. However, I'd like to have my master page use a separate theme to my content page. Is this possible when using the CDN? I'm using ASP.NET.
View 2 RepliesI have a view that displays an appointment schedule for the logged in user. It defaults to today's date and schedule when first navigating to the Index action for the controller. I have added a jQueryUI DatePicker to the view and when the user selects a new date I would like the data to be refreshed and the view to be refreshed immediately. Following are partss of the code. The javascript for the DatePicker that sends the new date back to the controller:
[Code]....
This works fine and the Index function of the controller gets the date back as a parameter. Code for the controller is:
[Code]....
When I run this in debug it seems to be working fine also. The model calls a stored procedure with input parameters and the new date gets passed just fine. The correct data is coming back but the view does not re-render with the new data on the first pass through. I had to put a button on the view to prompt the user to refresh the view after selecting the new date to get it to work at all. So here is the scenerio:
User navigates to view and gets today's schedule. User selectes new date from DatePicker
In debug the Index controller is fired immediatly and the new data is retrived and returned to the view but this is not reflected in the UIUser clicks the "Go" button.
In debug the controller is again fired immediately with the same date and the data is retrieved and returned to the view and this time it renders correctly.
I tried code below using last jqueryui.com source code. This code is copied from menubar sample in jquery ui menu control test subdirectory.
If File Open is selected, only alert box appears. Page is not opened. How to open pange if menu item is selected ?
[Code]....
I trying to do something like thatFirst, Create a new mvc 3 project in visual studio 2010Next, Turning on the custom error in the ViewsSharedWeb.config ...And then, I put the Tag in the Index ActionResult, Home Controller Public Class HomeController Inherits System.Web.Mvc.Controller
[Code]....
End ClassFinally run the app, and always show the yellow message error. I review a lot of examples and always indicated that is correct, but doesn't work.
I am doing MVC 2 have given HandleError attribute to all of my controller class.I have
<customErrors mode="On" defaultRedirect="Error.aspx">
In my web.configI also have Error.aspx in my shared folder of views.Still on an exception in controller, The Error.aspx is not rendered
I'm trying to work with HandleError attribute in a MVC2 application and found some weird feature.When you create a new project and choose "ASP NET MVC2 Web Application" (the one that comes with Home and Account suppport) the following code works well:
[Code]....
I believe that is a configuration issue, but I don't kwon how search about.Anyone has an explanation for this?
I have tried everything, even uninstalling asp.net mvc3, and I can't get HandleError global filter working.I have set up the HandleError filter in the Global.asax:
public static void RegisterGlobalFilters(GlobalFilterCollection filters)
{
filters.Add(new HandleErrorAttribute());
}
Also I have CustomErrors enabled (it does not matter if i set defaultRedirect="Error" or not, I think that is in the docs because is needed for older versions of mvc):
<customErrors mode="On" />
Trying to navigate through the page until the error gets raised, wether you do from localhost or using the hostname, inside the development server or IIS 7.5, it always redirects to a standard status 500 page, instead of my custom Error.cshtml view that I have created in Shared. Here is Error view code:
@model System.Web.Mvc.HandleErrorInfo
@{
ViewBag.Title = "Oooops";
}
<h2>Ooops Something really bad happened!</h2>
Also I have noted that if I create a new ASP.NET MVC3 project and then select "Internet Application" template, and just enabling customErrors in that project, then the HandleError filter starts working just fine, however using the empty MVC3 template does not.I want to clarify, that indeed I can see the error view being processing when debugging, however the browser always display Error 500 page.
I am using MVC2 on VS2010 Express edition. I followed a post by Dino Esposito on UI with JQuery passing data to a dialog from strongly typed views. I can't make the dialog work with modal:true option.Here I have a simple page that includes RenderPartial for a dialog. The dialog is supposed to pop up when a button is clicked. However, if I include modal:true as one of the dialog options, then when the button is clicked nothing happens. The dialog does not pop up. When I remove modal:true from the dialog options then dialog pops up as expected and closed as expected.
View 10 Replies<asp:GridView ID="GridView1" runat="server">
<Columns>
<asp:TemplateField>
<ItemTemplate>
<asp:TextBox ID="TextBox1" onchange="calculate()" runat="server" Text="0"></asp:TextBox>
</ItemTemplate>
</asp:TemplateField>
</Columns>
</asp:GridView>
I'm getting this error on the above markup: Message 1 Validation (ASP.Net): Attribute 'onchange' is not a valid attribute of element 'TextBox'.
I have a problem with my web site 1stSigBdeAssn.org. I have made no changes to the site but I now get the following error message:
Parser Error Message:
Unrecognized attribute 'targetFramework'. Note that attribute names are case-sensitive.
Source Error:
[code]....
I created a simple Master Page in Visual Studio 2008:
<%@
Master
Language="VB"
CodeFile="MasterPage.master.vb"
Inherits="MasterPage" %>
<!DOCTYPE
html
PUBLIC
"-//W3C//DTD XHTML 1.0 Transitional//EN"
and got green underlined 'Master' with two warning messages: 1.Validation (ASP.NET): This attribute name must be followed byan equal (=) sign and a value. If the value is in quotation marks, the quotation marks must match. 2. Validation (ASP.NET): Attribute 'Master' is not a valid attribute of element 'Control'.How I can get rid of the messages?
I've got a div on Page A.When an event happens (whatever I define, a click, whatever), I do a div.Dialog, set its properties and open itThe data inside is returned from an async .ajax call that grabs the data from a url and appends it to the div by calling div.html(data) inside the .ajax callback, so it's essentially loading a PageB by getting the data (content) and appending it to the div that's calling the dialog("open")...nothing special here I don't think.
My question: In Page B, how do I reference the dialog so I can do some things to it? For instance in Page B's content that I received back from that .ajax call and added to the div via .html(data), there is a button and when clicked I need to close the dialog.Right now my buttons are not working inside the dialog because one of them closes out the dialog and the other should redirect to a new page but both do not work now because I have no reference to the dialog that it's in to manipulate it. So I need reference so I can close the dialog via some jQuery that will reside in PageB (data).
I have a tag:
<asp:ListItem
CssClass="LabelCSS">Executive</asp:ListItem>
and I am getting the error message
Validation(ASP .Net):Attribute CssClass is not a valid attribute of element ListItem.
What attribute would I use for Css with ListItem?
i'm trying to host an .net framework4.0 application in IIS7. i got an error while clicking on the manage module in modules .like ("Unrecognized attribute 'targetFramework'. Note that attribute names are case-sensitive. ") .I changed my application poll to .net4.0.I am able to browse my application
</system.serviceModel>
</configuration>
I installed Microsoft Visual Studio 2010 Ultimate Trial and converted existing asp.net 2.0 web application and I am getting this error: znrecognized attribute 'targetFramework'. Note that attribute names are case-sensitive. It's coming from this section in the web.config which was auto-generated by VS2010 when I converted the project:
<compilation defaultLanguage="c#" debug="false" targetFramework="4.0">
<compilers>
<!--<compiler language="c#" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" extension=".cs" compilerOptions="/d:DEBUG;TRACE" /></compilers> -->
<compiler language="c#" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" extension=".cs"/></compilers>
<assemblies>
<add assembly="Microsoft.JScript, Version=10.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/></assemblies></compilation>
I am developing asp.net mobile application. I am using LINQ to XML to query XML file. I am using the following query to retrieve the name & value of the query dynamically as follows
var TotalManifolds = from MF in FieldRoot.Element("FIELD-DEFINITION").Element("MANIFOLDS").Elements("MANIFOLD")
join SLT in FieldRoot.Element("FIELD-DEFINITION").Element("SLOTS").Elements("SLOT")
on (string)MF.Attribute("MID") equals (string)SLT.Attribute("PARENT")
select new
{
SlotName = (string)SLT.Attribute("NAME").Value,
SlotValue = (string)SLT.Attribute("NAME").Value
};
In the following statement of above query I want to retrive the name of the attribure dynamically without explicitly specifying the name of the attribute SlotName = (string)SLT.Attribute("NAME").Value Here I am explicitly specifying the name. I want to code which can dynamically retrieve the name of the attribute. I am new to Linq to xml. how this can be done programatically? or can you provide me the link through which I can resolve the above issue ?
I am trying to achieve a SSO implimentation across my websites so i am using the machine key attribute to do so.now the trouble starts here as the website the user logs in is on the .net 1.1 framework and the website it it navigating to is .net 4.0.I have share the same machine-key across both the application . It works fine in my testing environment but as i move to the deployment server ,it just dosent work !So what i could do is read this article on MSDN :
http://msdn.microsoft.com/en-us/library/eb0zx8fc.aspx
this tells me to add a domin attribute like below
<forms loginUrl="~Login.aspx" defaultUrl="Default.aspx" protection="All" timeout="80" name=".ASPXAuth" domain="asbc.com"/>
but this thing just dosent work on the 1.1 application and throws an error Unrecognized attribute 'domain'.
Where do i get to mention the domin in my 1.1 application.?
So this is what i'm trying to do, i have a web application that deletes a physical file and the file record in the database. I am trying to find a way to prompt the user to see whether they want to delete the record in the db if the physical file is missing ...
using ASP.NET, here's where i'm getting stuck ...
[code]....
is there a way to get the value from the popup back?
[Code]....
why there is a dialog box at the end of the flow of the code asking to save the file. what i could check ,what is going wrong .
I am creating a online exam web application in asp.net, i want to open a conformation message box or alert message box on button clicking when user submit the test or fill user information and other task?
View 3 Replies1) open a dialog from using Jquery2) fill up the form and send the data from the form to controller3) if success then close the dialog and refresh the gridview from the calling page, and if not success display the error message on the dialog for
View 3 Replies