i have a problem with web application bulit on vs2005,an application work client/server .the application End event fire every 1 hour almost,although there is no changes on web.config or deleting files!
View 8 RepliesIn my project Session end event is not getting fire.
How to fire it in global.asax file..
I need to have a timer to count down a multiple-paged online quiz. The timer countdown should decrement consecutively on each following page. It is tricky to use javascript to maintain the timer value across multiple pages through sequences of postbacks. So, I have been searching a server-side solution and found this:
http://forums.asp.net/p/1621352/4161304.aspx (see the response by Wenchao Zeng - MSFT, the 4th post in that thread).
I created a small web application to test it out and it works great. But when I put the code into a header user control (Header.ascx) in my quiz application, the Timer control's OnTick event never fires. I put a break point in the first line of Timer1_Click, but the debugger of visual studio never gets there.
I tried this:
[Code]....
The code behind is the same (except maybe UI control names) as the one we see at the thread I referred to above. But Timer1_Click never gets executed (and hence my countdown doesn't get displayed). The CountDownTimer class works just fine because I can see from the debugger that the time value is decreasing like I want.
How can i capture Application pool recycle event in asp.net c# code so that when recycle event occurs i can make a post back or refresh the page in the code ?. Our Application sessionstate mode is StateServer which helps me in not loosing the session data but still i need to refresh the page at server side only on this particluar event.The reason is at the client side javascript webform_DoCallBack doesnot fire when there is application pool recycle and thus website stops getting updates.we have a timer set to 15 minutes when webform_DoCallBack fires and fecthes updates for the page and displays it.
View 8 RepliesI need to handle "session end" event for my web application when user closes his browser. Session is stored in Sql.
View 6 RepliesI am getting user information from Ldap server.Because of this I am getting performance issues in my application. For this I have a created a method in Application_start event then everything is working fine, my problem is when ever user adds in Ldap those information is not getting reflected in the application because we have implemented this in application_start event.SoI want to keep this method in application_start only and I want to update the new users also in my application how to do this.If I write same code in session_start event then if user clicks on user maintenace tab then processing the request message is coming. So I want to be keep in Application_start event and also it should update the latest user information in the application.
View 1 RepliesWhy Session_OnEnd does not fire in state server & SQL Server modes....... i mean what is the speciality in InProc mode that Session_OnEnd fires in that mode only ????
View 1 Repliesi have one method which save datatable in viewstate.i am calling this method in. page_load2. Prerenderthe page was every heavy,i did tracing of page i found due to calling of method from preprnder it doubled the viewstate sizewhat was the reseon behind this.
View 2 RepliesAll we have a global ships position tracking website which runs smoothly until IIS application pool recycles.When there is workerprocess recycling looks like session state expires as a result i loose all session data and when customer clicks refresh button he is redirected to login page.
In web.config Session state mode is set to InProc so i changed it to State Server but to my luck i have MAP object which is not serialiazable which is causing the maps from not appearing on the website.I tried adding serializable attribute to the object class but still not succesfull.Our website is accessed by our customers whose count is more than 1000.
Changing the session state mode from InProc to StateServer can really slow down the response time so
Is it good to go further fix the serailizable issues and move to state server?.
Is there any way I can retain my session data when application pool recyles?..
Stopping Application pool from recycling may not be a good idea considering health factor of web server.
I am getting this error while executing my Asp.Net application.i am not able to execute application using Visual Studio Interface and when i am trying to execute application from Local IIS. its executing well but when i am trying to click any button for searching etc it is giving this error. The state information is invalid for this page and might be corrupted. The detailed information is
[Code]....
[FormatException: Invalid character in a Base-64 string.] System.Convert.FromBase64String(String s) +0 System.Web.UI.ObjectStateFormatter.Deserialize(String inputString) +72 System.Web.UI.ObjectStateFormatter.System.Web.UI.IStateFormatter.Deserialize(String serializedState) +4 System.Web.UI.Util.DeserializeWithAssert(IStateFormatter formatter, String serializedState) +37 System.Web.UI.HiddenFieldPageStatePersister.Load() +113[ViewStateException: Invalid viewstate. Client IP: 127.0.0.1Port: 1307User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5ViewState: 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...][HttpException (0x80004005): The state information is invalid for this page and might be corrupted.] System.Web.UI.ViewStateException.ThrowError(Exception inner, String persistedState, String errorPageMessage, Boolean macValidationError) +106 System.Web.UI.ViewStateException.ThrowViewStateError(Exception inner, String persistedState) +14 System.Web.UI.HiddenFieldPageStatePersister.Load() +217 System.Web.UI.Page.LoadPageStateFromPersistenceMedium() +105 System.Web.UI.Page.LoadAllState() +43 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +6785 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +242 System.Web.UI.Page.ProcessRequest() +80 System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +21 System.Web.UI.Page.ProcessRequest(HttpContext context) +49 ASP.pages__cmtickets_cmtickets_reports_cmtickets_search_aspx.ProcessRequest(HttpContext context) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesapp_mobily_alexmare1eddc658e6f2ba5App_Web_b9acfmsy.14.cs:0 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +181 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +75
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3082
I am very new to asp.net. I developed one application. In that I have two pages. First page contains Application.Get() in page load event, here I read this Application variable, initially it returns NULL. If it is NULL, I make some buttons invisible. Then I jump to second page, in that page contains Application.Set(). Again I jump from second page to first page, this time Application.Get() is not NULL, I make some buttons visible.This is ok, if I execute the program in .net software.
But, when I publish this same program to web server like IIS, it is not working properly. After publishing very first time the first page returns NULL after that it doesnt return NULL even I closed the browser. I dont know why. In program, I used 2.0 framework. IIS also has 2.0 framework. Please clear this issue.
global.asax:-I have defined a struct (my_struct)-I add a List of structs (List<my_struct>) to Application["MyList"] In default.aspx:-I have defined the exact struct (my_struct) and want to cast the Application["MyList"] object to the List of structs.
example: x = (List<my_struct>)Application["MyList"];
I receive this error "Unable to cast object of type 'System.Collections.Generic.List`1ASP.global_asax+my_struct]' to type 'System.Collections.Generic.List`1[_Default+my_struct]'
User Interface: 2 Labels; 1 Buttons
Requirements: Create a Web Page in ASPx that will do the following:
1)One label will provide a count of how many times Button 1 has been clicked in the current session.
2)One label will provide a count of how many times Button 1 has been clicked by all users of the application. The Application Code for the Button should start at 100 (set this in the Global.asax file). this is what i have so far but i cant seem to get the application state to work properly.
aspx.vb
Partial Class _Default
Inherits System.Web.UI.Page
Dim clickcount As Integer
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Session("ClickCount") Is Nothing Then
clickcount = 0
Else
clickcount = CInt(Session("ClickCount"))
End If
If Not IsPostBack Then
If Request.Cookies("UserName") IsNot Nothing Then
Label1.Text = "Welcome Back " & Request.Cookies("UserName").Value & "."
End If
End If
Dim clickCounta As Integer = CInt(Application("ClickCount"))
End Sub
Protected Sub PostBackSession_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.Click
clickcount += 1
lblClkCnt.Text = "Current Click Count is " & clickcount
Application.Lock()
Dim clickCounta As Integer = CInt(Application("ClickCount"))
clickCounta += 1
Application("ClickCount") = clickCounta
Application.UnLock()
AppClick.Text = clickCounta
Dim nameCookie As New HttpCookie("UserName", _
TextBox1.Text)
nameCookie.Expires = Now.AddYears(1)
Response.Cookies.Add(nameCookie)
End Sub
Protected Sub PostBackSession_PreRender(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.PreRender
Session("ClickCount") = clickcount
Application("ClickCount") = clickcount
End Sub
End Class
global.asax
<script runat="server">
Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(Application("ClickCount"))
Application.Add("ClickCount", 0)
End Sub
Sub Application_End(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(HttpContext.Current.Application("ClickCount"))
End Sub
Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs)
' Code that runs when an unhandled error occurs
End Sub
Sub Session_Start(ByVal sender As Object, ByVal e As EventArgs)
End Sub
Sub Session_End(ByVal sender As Object, ByVal e As EventArgs)
End Sub
i have button and i want to count how many times in a page load this button clicked? or have a counter in the events but i be able to use that number outside the coding.
View 4 RepliesI am using a treeview in my master page and every node having link to its container page.That means click on any child node of treeview its redirect to another page by taking some value.
Now every time I click on nodes of treeview, its get collaps when child page loaded...
Now regaring maintain state of treeview across my web application...
I in page load i change the checkstate of checkbox false to true or true to false, in turn which i expect to fire the check_change state but seems not firing the event
protected void Page_Load(object sender, EventArgs e)
{
chkDegisim.Checked = true;
chkDegisim.Checked = false;
}
protected void chkDegisim_CheckedChanged(object sender, EventArgs e)
{
int a = 1;
}
when i put a breakpoint to chkDegisim_CheckedChanged, it does not fall into the event chkDegisim_CheckedChanged.
chkDegisim's autopostback is true and i have declered chkDegisim_CheckedChanged event in aspx.
why it does not fire chkDegisim_CheckedChanged event?
we are experiencing big difficulties in the configuration of ASP.Net state service and II7. The service seems not working correctly because when the application pools recycles the applicatio loose the session.If we try the same configuration in IIS6 it works correcly.What is the correct way to configure the aspnet session state service in iis7?
View 2 RepliesHow to pass query string from one application to another application, i need to send values through one page of application to another application,I am using inprocess session state.
from loging page i need to send sessions to another applicaion but here sending sessions are some what diffcult (after googling).so is it possible through query strings???if yes How pass them please tell me the sample example.will it be possible through coockies?? or query strings. How
I Want To Use A Session Variable From One Application to Another Application. Is That Possible in ASP.NET 3.5 Or Greater To Use Session Variables As i Required. My Both Applications Host In Same IIS Server.
Me To Sort Out This Prob. ASAP
How do I call Page_PreRender? And where is it called from?
Here's the code I want the Page_PreRender event to contain:
DropDownList oddl = (DropDownList)Page.Master.FindControl("ddlSystemsMain");
if (Session["LastSystemUsed"] != null)
{
oddl.SelectedIndex = (int)Session["LastSystemUsed"];
I've exhausted my resources and still have been unable to determine why I'm experiencing this issue:
- I have an ASP/VB Website
- I've added a Global.asax file
- In the Global.asax file, I'm initializing some settings in the Session_Start method
If I use the Built-In VS web server, the Session_Start method is hit and the settings are initialized
If I use an IIS Virtual Directory for the website, the Session_Start method is NOT hit
I have two web applications and sometimes I need user to jump from one application to another. Since they are two web applications( websites) in the same machine, I can not share session between them.
The technical challenge for me is how to pass session information (I only need to pass userID string information in the session) from one source application to another destination application -- so that the user feels Single Sign On and personal information is displayed for him/her in both application (as the userID is passed to the destination application, no re-login is needed).
Another challenge is that when the user jumps to another URL in another application -- I just need to generate the common unified [URL]
i allow my admin to login from his login page and login information verified and stored into an session after that, he visited into an client page, there is an logout button this will visible whether session has the user id or admin user id else it'll be invisible.
now the scenario is:
1. admin logged into admin page
2. then in the address bar type the client page name
3. now the client page is check whether has the userid or admin user id in Session, now the session has admin user id so, its show the Logout button.
4. from this client page, the admin clicks on Logout button, here i have Abandon the session and moved into the admin login page.5. now again admin types the same client page name in the address bar from his login page(but now he didnt logged in).6. this time i set the break point on client page_load event but its not hitting the event also its visible the Logout button also.so, how its not hitting the page_load event and why the logout button is visible after loggedout.
How do I invoke an event handler a minute before session timeout.
I found this code.
[Code]....
How to prevent Session.Timeout extension on certain event from codebehind?
What I do - I have Session Timeout configured in Web.config file for 10 minutes. Also, I have in my webpage1.aspx, an ASP.NET AJAX control ModalPopup which shows into the page 9 minutes after the user stopped sending requests to webpage1.aspx. I did this with this code:
[Code]....
[Code]....
So, my initial calculations was that 1 minute before the session ends, i'll inform the user something with the ModalPopup. The problem is that when this Timer1_Tick event triggers, the session.timeout renew ( or extends ) and the session ends 10 minutes later (if user still don't send any request from his browser).
Can I write code in Timer1_Tick event which prevent session extension?