Update Command In Vb.net

Mar 21, 2011

My program is doing good when I suddenly bumped into this problem. I dont know how to do the next functionality that I need to accomplish. I am done with inserting values, showing the gridview etc and it works great. Now my problem is the update command.

I have 2 tables
table: tblDest
Fields:
destLastName
destFname
destEmail
Table:tblSource
Fields:
Sourcelastname
SourceFname
SourceEmai

Now, when I run my update command in sql server, it works great! I just right click the database, click new query and i run this command:

Code:

update tblDest set DestEmail =(Select SourceEmail from tblSource where tblSource.SourceFname = tblDest.DestFname and tblSource.SourceLastname = tblDest.DestLastname)
what the query does, is it updates the table tbldest email where lastname and firstname exists in both tables that are equal,
the question is, I want to automate this, I am done with inserting values, the problem is, I dont know how to run the update command,
I tried doing this:

Code:

Dim sqlds As New SqlDataSource
sqlds.ConnectionString = ConfigurationManager.ConnectionStrings("sqlconnect").ConnectionString
sqlds.ProviderName = ConfigurationManager.ConnectionStrings("sqlconnect").ProviderName
sqlds.UpdateCommand = "update tblDest set DestEmail =(Select SourceEmail from tblSource where tblSource.SourceFname = tblDest.DestFname and tblSource.SourceLastname = tblDest.DestLastname)"
DestGrid.DataSource = sqlds
DestGrid.DataBind()

but nothing happened.

View 2 Replies


Similar Messages:

Forms Data Controls :: Gridview Update / Delete Command Like A Update Command?

Apr 26, 2010

how would i do my Gridview delete command like a update command?

im using a datasource... and my delete command is like my update command... so i can change the status into "INACTIVE"...

DeleteCommand="UPDATE ACCOUNT_MAINTENANCE SET am_status = 'INACTIVE' WHERE (accmain_no = @accmain_no)"

UpdateCommand="UPDATE [ACCOUNT_MAINTENANCE] SET [account_type] = UPPER(@account_type), [min_deposit] = @min_deposit, [min_capital] = @min_capital WHERE [accmain_no] = @accmain_no"

when i press my delete command at gridview... the status changed into "INACTIVE" but when i refresh or press f5... it automatically update the status into "INACTIVE" also...

View 3 Replies

Is It Necessary To Do Select Command Before Update Command In OracleDataClient

Aug 19, 2010

I've recently started working in ASP.NET and RDBMS.I'm making a test form where I can do basic add,update,delete operations.I'm using OracleDataClient to do the DB operations.I was able to populate a listbox using OracleDataAdapter.

Now after clicking on update button,I intend to Update in DB.I've Dataadapter with it's update property.But the update query is not happening.The examples I saw over net all have Select command before Update.Is it actually like that or am I missing some point.

How does Oracle DataClient work with Insert,Update,Delete Commands.

View 1 Replies

DetailsView Update Command Doesn't Update Unless All Of The Fields Are Present?

Nov 16, 2010

I have a page that binds data from DB to a DetailsView.I want to use the auto-generated Update command.

Everything went OK, and also updating was successful, but if I remove any field that I don't want to have chance to update, then the Update command doesn't update! the old values retain!

I mean: if all of the fields are present in the detailsView, the update will be OK, otherwise, the update will NOT update any thing.I've tried to mark the fields that I don't want to view as "Visible = 'false'" but with no good results!

View 2 Replies

SQL Server :: Update Command Not Writing To Table?

Jan 15, 2011

I have a table that is not getting updated. My insert command is working fine. Here is the update code from business logic area and stored prodecure. The SP works fine when I execute it from sql mgmt studio and updates the table:

[Code]....

View 3 Replies

DataSource Controls :: Update Command Is Not Working?

Jan 17, 2010

given below is the simple update string am using to update my database...

string q = "update register set fname='" + TextBox1.Text +
"',lname='" + TextBox2.Text +
"',gender='" + gender +
"',edu='" + TextBox3.Text +
"' where username='"+check +"'";
cmd.ExecuteNonQuery();
SqlCommand cmd =
new
SqlCommand(q, cn);

but it is not working...database is not getting updated...why?

View 2 Replies

Using GridView Update Command For Specific Fields?

May 4, 2010

How do I use the Update command in GrideView?

I would like to use update command for specific fields in the dataset, but not all fields from database ( or maybe in GridView? )

View 1 Replies

VS 2010 - Command Button With Update Panel

Mar 16, 2012

I have a command button in an update panel but when I click the button, it can't fire. How I can fire button in update panel?

View 1 Replies

VS 2010 / DataGrid Update Command Runs Twice?

Aug 21, 2013

I have a page that has a datagrid on it and using inline update functionality and when I click the edit link, update text and click update link it updates fine but I put an email function in and I see two emails being sent. why it runs twice?

HTML Code:

<%@ Page Title="Courses" Language="VB" MasterPageFile="~/themes/admin.master" AutoEventWireup="false" CodeFile="courses.aspx.vb" Inherits="admin_courses" %>
<asp:Content ID="Content1" ContentPlaceHolderID="cphHead" Runat="Server">
</asp:Content>
<asp:Content ID="Content2" ContentPlaceHolderID="cphHeader" Runat="Server">
</asp:Content>

[code]....

View 4 Replies

DataSource Controls :: How To Update Command Not Working Properly

Jun 25, 2010

I have the below code in my project..however its giving me an error on the update(bolded line)..please help me on this..

Private Sub ChangePassword1_ChangedPassword(ByVal sender As Object, ByVal e As System.EventArgs) Handles ChangePassword1.ChangedPassword
lblTempPassword.Text = ChangePassword1.NewPassword.ToString
CustomerName.Text = CType(Session("UserName"), String)
Dim FV1Updobjconn As Data.SqlClient.SqlConnection
FV1Updobjconn = New Data.SqlClient.SqlConnection()
FV1Updobjconn.ConnectionString = ConfigurationManager.ConnectionStrings("ASPNETDBconnectionString1").ConnectionString
FV1Updobjconn.Open()
Dim dtUpdating As New Data.DataTable()
Dim sqlUpdating As String = "UPDATE [SuperAdmin] SET [TempPasswd]= @SU2TempPasswd, [TempPwd]=@CU2TempPwd WHERE ([CustomerName] = [@CU2CustomerName])"
Dim cmdUpdating As New Data.SqlClient.SqlCommand(sqlUpdating, FV1Updobjconn)
cmdUpdating.Parameters.AddWithValue("@SU2UserId", UserIDValue.Text)
cmdUpdating.Parameters.AddWithValue("@SU2TempPasswd", lblTempPassword.Text)
cmdUpdating.Parameters.AddWithValue("@CU2TempPwd", False)
cmdUpdating.ExecuteNonQuery().... I get an error here saying..INVALID COLUMN "CU2CustomerName"
' Dim adUpdating As New Data.SqlClient.SqlDataAdapter(cmdUpdating)
' adUpdating.Fill(dtUpdating)
' Get the values needed to be passed on
' CtSUCompanyName.Text = dtUpdating.Rows(0)("CompanyName").ToString()
' CtSUCatPurch.Text = dtUpdating.Rows(0)("CategoriesPurchases").ToString()
FV1Updobjconn.Close()
End Sub

View 6 Replies

DataSource Controls :: Create Update Command In Code Behind?

Feb 3, 2011

I have a detailsview which I am populating using a SQLDATASOURCE, which is bound to a table in a SQL db. Because the number of columns in the table will change, I am using SELECT * from [TABLENAME] to populate the view, this works fine.

My problem is that I need to also be able to update the table and I thought the best way was to generate the updatecommand in the code behind. This is no problem, code is as follows:

[Code]....

But the next stage is to create the relevant parameters for the update command. Does anybody have any thoughts on this? All of the information I have found for the updateParamater reference knowing the final value.

What I really need to do is the code behind equivalent of

<asp:Parameter Name="PARAMETERNAME" Type="Int32" />

Not sure whether this is possible.

View 4 Replies

ADO.NET :: Data Adapter Update Method With Command Builder

Nov 11, 2010

Code:

SqlDataAdapter da = new SqlDataAdapter("select * from " + txtTableName.Text, DataStoreGeneral.GetConnectionString());
DataTable dt_app = new DataTable();
da.MissingSchemaAction = MissingSchemaAction.AddWithKey;
da.FillSchema(dt_app, SchemaType.Source);
da.Fill(dt_app);
SqlCommandBuilder build = new SqlCommandBuilder(da);
da.InsertCommand= build.GetUpdateCommand();
da.Update(ds.Tables[1].GetChanges(DataRowState.Added));

Problem: In my scenerio i had dataset with a table (in code->ds.Tables[1]) in rowstate added. I wanted update on database with this table so i changed insert command of adapter to update command of command builder, but no update got performed. When debugged in sql profiler i found that update command generated by builder is checking all columns in where clause and with parameter value of data table instead of from database column value.

exec sp_executesql N'UPDATE [ShopResources] SET [GROUP_RESOURCE_ID] = @p1, [SEQ_NO] = @p2, [SUB_RESOURCE_ID] = @p3, [EFFICIENCY_FACTOR] = @p4, [RUN_COST_PER_HR] = @p5, [RUN_COST_PER_UNIT] = @p6, [BUR_PER_HR_SETUP] = @p7, [BUR_PER_HR_RUN] = @p8, [BUR_PERCENT_SETUP]
= @p9, [BUR_PERCENT_RUN] = @p10, [BUR_PER_OPERATION] = @p11 WHERE (([GROUP_RESOURCE_ID] = @p12) AND ([SEQ_NO] = @p13) AND ([SUB_RESOURCE_ID] = @p14) AND ((@p15 = 1 AND [EFFICIENCY_FACTOR] IS NULL) OR ([EFFICIENCY_FACTOR] = @p16)) AND ([RUN_COST_PER_HR] = @p17)

AND ([RUN_COST_PER_UNIT] = @p18) AND ([BUR_PER_HR_SETUP] = @p19)

The problem I identified is parameter values inside where clause are from data table which is obvious that update condition will not be met. Is there some way to restrict where clause to primary key only in Command Builder?Or why is command builder taking where clause parameter values from datatable instead of command (query)?

View 2 Replies

GridView - Update Row Command Does Not Revert Back To Display-only

Jan 19, 2010

I have a GridView that is populated from a LinqDataSource. When I update a row, the RowCommand fires and the change is persisted to the database, but the Grid does not refresh. I have it in an UpdatePanel and explicitely call Update() in the RowCommand handler, but there is no postback and the page just sits there in Edit mode. Once I click cancel, it will return to view-only and the grid shows the new value.

something in the wiring of the GridView regarding the data source is wrong. No exception bubbles up, though. A stripped-down copy of the markup is below.

[code]....

View 3 Replies

Fire The Grids Insert / Update Command When The Users Tab Out Of The Row?

May 13, 2010

How Can I fire the Grids Insert/Update command when the users tab out of the row?

View 1 Replies

Forms Data Controls :: Use An Update Command Within GridView?

Sep 26, 2010

I am trying to use an Update Command within my GridView. I need to find the "FindControl" for the Edit Command textboxes.

Ie. When the user clicks the Edit button, the row is populated with dropdown boxes, textboxes, etc for editting. Then when the user clicks on Update (button) and the GridView1_RowCommand function is activated with 'if (e.CommandName == "Update")' statement with my FindControl. etc. and my sql UPDATE command statements are used. How do I convert my FooterRow info to my Edit FINDCONTROL info?

This is what I have:

[Code]....

View 3 Replies

Forms Data Controls :: Gridview Update Command In C#?

Aug 6, 2010

i am using edit,update,cancel command in gridview, i need to update value in bound field how to retreive that value.

View 7 Replies

Web Forms :: Update Two Table Data With Single Command

Feb 20, 2013

I have two tables in oracle ,

i want to update two table data in a single command...

View 1 Replies

DataSource Controls :: SQL UPDATE Command - Perform Math Function From Value

Jun 27, 2010

Is it possible to perform an update command which performs addition using a value from a textbox? For example: User inputs a number into TextBox1 (I use regular expression validation to ensure this is an integer).

[Code]....

Basically if the user inputs 5 into TextBox1, I want the update command to subtract 5 from that user's ballance.

View 2 Replies

Forms Data Controls :: Update XML With Textbox And Command Button?

Apr 8, 2010

I'm trying to create a ShoutBox for my site, and for those of you who are not familiar with shoutboxes, they are chat boxes on websites that users can post live messages on, and the other uses will see their message and be able to respond. I didn't find any good ones online, so I started to write my own. I'm doing it with an XML, but I want the user to be able to post messages using a textbox I added (txtMessage) and the button (cmdPostMessage), which should add a new item to the XML file, and all the other uses will receive that message (their xmlDataSource and the DataList will PostBack every second or something like that). It is able to read messages, but not send.I am however facing three problems:

1- I need to find a way for the user's input to be added to the XML.

2- I need to find a way for the current logged-in username to be found, and added to the XML, and also detect if no user is logged in, in which case the user wil receive an alert saying "Please log in to post messages to the ShoutBox" and redirect them to the login page.

Here is the text in the XML

[Code]....

View 1 Replies

Forms Data Controls :: Update Command Not Updating In Base?

Jul 12, 2010

I am using asp.net(C#) as platform for building my application. I want to update the values in the database for the particular user & using the following code:

[Code]....

when I run this code, it works perfectly fine & there's no error, but when I check into the database, the values do not change & remains same. The default value in the database is NULL.

Kindly check into the matter & revert ASAP.

View 1 Replies

Web Forms :: GridView Update And Delete Command Button Doesn't Trigger

Apr 3, 2010

I have 3 gridviews in one of my web page. I have simplified the system structure in the image below(further description will be stated below the image): As shown in the image above, the web site(presentation layer) will work closely with the Business Logic layer(BLL) and Data Access Layer(DLL). ObjectDataSource control will be the middle man to select, update, insert and delete the data in the gridviews. During Select, returned data from the database at DAL will be stored in a datatable and return to BLL and then the website itself.

The data in the returned datatable will be filetered by type using RowFilter method and stored into the 3 dataviews. Each dataview will act as the datasource for the 3 GridViews respectively, and therefore I specified the datasource programatically instead of setting the datasourceid for each gridview.

dataview1 = New DataView(dtSelectedTable)
dataview1.RowFilter = "Type='1'"
GridView1.DataSource = dataview1
GridView1.DataBind()
dataview2 = New DataView(dtSelectedTable)
dataview2.RowFilter = "Type='2'"
GridView2.DataSource = dataview2
GridView2.DataBind()
dataview3 = New DataView(dtSelectedTable)
dataview3.RowFilter = "Type='3'"
GridView2.DataSource = dataview3
GridView2.DataBind()

However, the Update(command button) and Delete(template field) doesn't work, the RowUpdating and RowDeleting event wasn't trigger when I click on the button, but it works if I set the gridviews' datasourceid to the objectdatasource. I couldn't figure out why, hope that someone who have come across the same problem couldn't provide some guidance.

View 5 Replies

Forms Data Controls :: Update Gridview Command With Customized Parameters?

Mar 22, 2011

I have a asp.net gridview control on my page with several fields and a couple of command fields. However, the update command is giving me problems.

Here is what works. The update command works provided I put straight text into the textboxes that appear. I even have one field that contains a dropdown list which works fine.

Here's the problem. I have two fields that need to access their value programmatically. These fields will reflect the current datetime and the current loggedin user from active directory. I have already created public strings in the C# code.

When I run the edit command on the asp form the grid uses one "DataKeyNames" element. With this the grid can update the selectedrow. However, I haven't been able to access it programmatically in the C# code. I can access the selectedrow in the "selectedindexchanged" event but then I am not able to update my fields in the gridview itself. So, part one of my question is how to I access the "DataKeyNames" properties of a gridview control.

if I can't access the "DataKeyName" property perhaps I could set the label nested within the gridview to the "myCurrentUser()" public string. I am inserting my code to hopefully make this clearer.

View 2 Replies

Forms Data Controls :: Datagrid To Call Itemcommand Or Update Command?

Mar 31, 2010

I use the following with datagrid to call itemcommand or update command etc, and i do this:

If e.CommandName = "doAdd" Then

End If What is the equivalent check in gridview?

View 3 Replies

SQL Server :: Update Command - The Error Shows Like "Must Declare The Scaler Value @Name?

Dec 22, 2010

what is the problem with my update command ? the error shows like "Must declare the scaler value @Name.

[Code]....

View 13 Replies

VS 2010 - Update Command For DetailsView Throwing Implicit Conversion Error

Oct 14, 2014

I've got a simple detailsview on a webpage for viewing, adding, and updating inspectors. Since it is a simple details view I'm just used the datasource select, update, delete, and insert commands. When I debug the page it populates the detailsview appropriately and allows me to page through the inspectors but when I try to update a field I'm getting the implicit conversion error in the attached doc. Below is my detail view markup. I was thinking the error is caused by the checkbox type being boolean while the SQL type for "Active" is bit but I've tried to use various conversion methods and can't seem to get them to work.

Code:
<asp:DetailsView ID="dvInspectors" runat="server" AllowPaging="True"
AutoGenerateRows="False" DataKeyNames="InsID" DataSourceID="InspectInfo"
Height="50px" Width="212px">
<Fields>
<asp:TemplateField HeaderText="Insp ID" InsertVisible="False"
SortExpression="InsID">

[Code] .....

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved