I need to know if there is any server-side function/custom-code available to find out the HTML of the entire page which is causing the PostBack.
I don't want to do it using JavaScript/jQuery but instead do it at server side.
A JavaScript workaround that implements it can be found at this link. [URL]
Reason, Why I need it? I am writing some inline javascript in page which performs some vital actions and supposed not to be tampered by user(hacker). So, when a postback occurs, I would like to find out the HTML of entire page (at server) so that I can verify it (I have already generated the hash code for entire HTML while rendering the page to check it on consecutive postbacks) for non-tamering and then process further.
This is the reason why I need a way to find out the HTML of the page causing the PostBack.
I'm having trouble with an image button I create via c# in an event causing page validation to occur on postback. The CausesValidation attribute is set to false at time of creation in the event. I also wire up the Click event in the page_init with postback so not to loose the event handler if the page posts another way. Here is the code I'm using in the click event of a Button. I've also tried to enable and disable viewstate for the button with no luck. What am I missing here that continues to fire page validation in the Click of this imagebutton?
I am having issue with my ModalPopUpExtender's OKControlID. I have a button inside an update panel that should do AsyncPostBack. The button works fine and runs server side code but it causes full page postback. How do I solve this issue? I want the 'OK' button inside the modalpopup to call the serverside code and update Label control 'label3' without causing the page flash. Given below is my code;
MarkUp:
<html xmlns="http://www.w3.org/1999/xhtml" > <head id="Head1" runat="server"> <title>Next Gen Web Browser</title> <script src="http://ajax.microsoft.com/ajax/jquery/jquery-1.3.2.js" type="text/javascript"></script>
I have a user control with linkbuttons (used for paging) and a repeater inside an update panel. The paging works correctly, but is causing a full page postback every time I click through to the next page.
The update panel looks like this:
[code]....
So far, I have tried adding an async postback trigger for the user control, which does cause an async postback but does not update the rest of the text in the update panel. In otherwords, the async postback occurs and the next page shows up, but the original text in the repeater is there as well just below it.
I have also confirmed that I have IDS set on my linkbuttons, since that can trigger a full postback inside an update panel.
I have tried changing the update panel mode (Always, Conditional, ChildrenAsTriggers, etc.).
None of it makes a difference - the only thing that actually causes an async postback is to use the trigger, but then the rest of the content in the update panel is not updated, so I get duplicate content.
When any of my page is idle for about 20 minute, and after that if I hit any button, like Sumit Button or any other button, at this time, Page.IsPostback is again False, and none of the click event is fired and page gets reloaded again.
This happens only if I go like this, open up any of my webpage, keep it idle OR do nothing for about 20 minute, exactly on 21st or 22nd minute, Click on any of the button on the page, and the page gets reloaded, click event does not get fired. I debugged for this and I checked the Page.IsPostback value at this point and I got it as False after 20 minute, I don't know why. It should be True. And because of this my page gets reloaded and nothing gets submitted and every control is in the blank position once again and user have to enter everything again.
But if I enter everything and hit any of the button or Submit button within 20 minute, then everything works fine, Submit button's click event is also gets fired and everything works perfect.
And this is happening in all of my page. I am not sure what configuration is wrong.
But just for more details, I have a master page, I am using Telerik Controls and I have session Timeout set as 60 minute everywhere, in web.config and in IIS settings and in my App_Pool also. On my Master Page, I have ASP:ScriptManager, Tekerik:RadMenu, ASP:ContentPlaceHolder controls and some other controls and javascript code too.
I have 1Dropdownlist 1 button and 1 datalist in my page i bind my datalist in Page_load event that show all my product from my DB ... Users can select their city from DDL click on button and in datalist just show product that are on selected city ...
Problem: when users select PARIS from ddl in datalist show product from selected city and when users want change their city from ddl before their click on button to show that city's product page load again and it show all product again...
I want when users change ddl.selecteditem in datalist show last result of user's selected not the result that i define in page load ... This is my code on page load ...
protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { DDLcity1.Items.Add(new ListItem("select your city", "")); BindDropDownList(DDLcity1, "Guidcity", "cityname", "ID"); }
In my default.aspx page I have a PlaceHolder control within an UpdatePanel. In this placeholder control I will dynamically load a web user control, which is just a form with a submit button. On this user control, I have the form within an update panel and I have the "Submit" button's Click Event added to the triggers.
When I submit the form, the UpdatePanel on the web user control nor the update panel on the default.aspx page are capturing the post back, thus causing a full post back which refreshes my page.
how to capture this post so its rendered in Ajax and not a full post back?
the problem that it is not causing post back on the first selection but on the second, I mean if i select from drop down list first selection no post back on the server,but when i select another item from the list (the second click on a different list item )
I have an issue that seems to only happen on my production server. I show or hide table rows whenever the buttons are clicked. However, when I do a postback on the checkbox, all of the rows become visible and the textbox stays empty. It works correctly on my test server and local workstation, just not in production.
Here is the markup...
[Code]....
Here is the code behind...
[Code]....
Here are the unexpected results whenever I check the chkShow2 checkbox... I am guessing this is a configuration issue on the server.
What is the best sequence order for Page.IsPostBack and User.Identity.IsAuthenticated? From what I have search for, this comes up most common:
If Not Page.IsPostBack Then If User.Identity.IsAuthenticated Then ~Some kind of code~ End If End If
Is this considered "best practice" or can the two items - Page.IsPostBack and User.Identity.IsAuthenticated -be split into their own sections so the fuctions of these can be independent of each other?I am trying to troubleshoot a placeholder that disappears from a master page when a content page button is pressed to change the content pages active view (I have a multiview w/ 5 views inside of it).
i don't know how far I'm going to get with this considering that I'm pulling together this API for a payment gateway that's isn't very well supported by the developers who supplied it, but...
I'm getting an "Object reference not set to an instance of an object" error on this:
I have a page with a (gridview nested within a gridview) in an UpdatePanel (UpdateMode="Conditional"). The nested gridview drops down when you click on an arrow and then you can click on each subgrid rows command field. The gridviews are loaded from the Page_Load event. When I click on the commandfield in the subgrid the Page_Load fires during the partial page postback. From what I have read this is normal with UpdatePanels. But What I don't understand is why both Page.IsPostBack and ScriptManager.GetCurrent(Page).IsInAsyncPostBack test false after I click on the command field in my grid. I need to stop the rebinding of the gridviews ( which causes the subgrid to collapse ) when the command field is clicked.Also: I am using MasterPages and the <asp:ScriptManager ID="ScriptManager1" runat="server"> </asp:ScriptManager> is located in my mater page form section.Would anyone have any suggestions how to test if a partial page postback is occuringHere is a link to the page source: http://pastebin.org/153774here is a link to the code behind: http://pastebin.org/153781
I have several usercontrols which are loaded based on business logic.However, all of them have webcontrols whose selected/entered value needs to be accessible in parent page on an event.Since there can be any combination of UserControls, I do not want to load all the UserControls in the Parent Page, since they are heavy.
I would like to load only those controls which are supposed to appear on the page, yet access the value from the usercontrol which caused the postback. (I would rather not access using Request.Form) (ViewState is open, but unsuccessful to store value in parent page's viewstate in onClick)Here is a sample scenario
Page: Home
Dynamically Loads: UserControls1
UserControls has TextBox tb and Button btn, causing onClick
When btn is clicked, I want to get value of tb in parent page on PostBack, Page creates UserControl2
I'm developing a custom URL Rewriter for a ASP.Net 3.5 project. This rewriter is not functionally different than most rewriters out there, the only difference being that the friendly URL collection is not loaded from a web.config file -- it's coming from a database instead. I made the naive assumption that it would be easy to develop a custom rewriter module from scratch, but now I know the mess I put myself in. I digress; let's go straight to the technical issues.
While testing the rewriter, I set up a friendly url that would take the user to a web form. Postbacks from this form should not alter the friendly address, as anyone would expect, sohttp://my.web.site/app_root/FriendlyURL is always rewritten asttp://my.web.site/app_root/not_friendly/form.aspxThings are fine when the browser first loads the FriendlyURL. The page comes up and is completely functional. However, when the form is posted back to the server, the page simply reloads but, at server-side, IsPostBack is false. It's like F5 was hit, except that a HTTP POST had indeed occurred.Unsurprisingly, when the interaction occurs through the "unfriendly" URL, the POST action triggers the postback as expected. This evidence suggests that HttpContext.RewritePath is somehow messing with the page lifecycle in a way that it loses sense of the postback operation.
I have the following tabpanel (it actually contains a bit more content, but that content doesnt influence my issue):
[code]....
When I remote the MaskedEditExtender and MaskedEditValidator, it doesnt show that (undesired) behaviour anymore.Is there something special these controls do that cause them to refresh? Is there a workaround for this?
Below is the sample code on using the update panel. The page just has a button and a label. On button click it updates the label with the server time. Though the label is inside the update panel the page goes for a complete postback. in understanding why it is behaving like that. I tried the options of Updatemode, using different script references nothing seems working for this simple application.
I've got a template field in a gridview that contains just a simple button...
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Administration.aspx.cs" Inherits="Administration" %> <%@ Register TagPrefix="ajaxToolkit" Namespace="AjaxControlToolkit" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
[Code]....
Whenever I click the button I get the error...
Invalid postback or callback argument. Event validation is enabled using <pages enableEventValidation="true"/> in configuration or <%@ Page EnableEventValidation="true" %> in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager.RegisterForEventValidation method in order to register the postback or callback data for validation.
I've found a decent amount of articles referencing this issue, including a couple on SO, for example...
[URL]
and...
[URL]
I might just be misunderstanding, but as far as I can tell they don't really help me. How do I get this to go away without setting enableEventValidation="false"?
I have a user control with a datalist. I just want to do some simple binding but keep getting an object reference not set to an instance of an object error. The following is the code, I am sure I am just missing something simple:
Dim dc As Forms.DataClassesDataContext = New Forms.DataClassesDataContext Dim formQuery = From fq In dc.v_form_questions _ Where fq.FormTypeID = FormTypeID _
[code]...
When I debug, I see values for the formQuery; I am also able to loop through the formQuery and response.write a field out, however every time I try to bind it to a databound control, I get the Object reference not set to an instance of an object error.I initally was using a simple LinqDataSource object, but needed to set the where parameter to the FormTypeID property of this usercontrol. I had a Where condition defined on Page Init, but started getting the object reference error.
I have an asp.net page that sets a few session variables. On my development machine (localhost), I do a postback and the session values are still populated.
When I Reload the page by clicking on the url bar and pressing enter the session variables are still there.
However when i deploy this page to a webserver, the page still retains the session values when doing a postback, but as soon as i click the url and press enter the session values are lost (where the ispostback = false)
But when i press the refresh button the session variables are present (but i do get a popup warning me that the page data needs to be resent!)
i am running IE 7, and the webserver is iis6 what am i doing wrong?!
I have searched high and low on this error, but my problem stems back to which control is causing this problem. In theory the problem starts when someone goes to a specific tab and clicks a button to download a PDF file. After doing that if I use a dropdownlist the error pops up.I have checked the code etc. just cannot figure out which control is triggering the error. I can identify the control that is the problem?
I have a modalpopupextender and I want to be able to update the information without causing a postback and having to re-show the modal, normally I use an updatepanel and this is working in most cases but I have an issue with a repeater where the ItemCommand has been set but clicking the button does not fire anything, unless I set the repeater as a trigger but this then does postback and I lose where I am. Not the usability I want to provide.
I have a link button inside a template field of a gridview. The gridview is wrapped in an update panel. I want the link button to fire an async postback but it always fires a full postback. Why is this?
This is a similar problem to the one described in the link below. However, I have tried doing a RegisterAsyncPostbackControl in the gridview databound, but this did not work.
I have put several buttons and panels in my update panel. I also have a script manager on that page. now when I click on any of the buttons then the functionality is working fine but problem is that the complete page gets reloaded witha a flick, instead of updating the update panel only. I have set the "children as trigger" property of update panel "true".
