Web Forms :: Page.IsPostBack Is False Incorrectly After Page Is Idle For About 20 Minute?
Feb 8, 2010
When any of my page is idle for about 20 minute, and after that if I hit any button, like Sumit Button or any other button, at this time, Page.IsPostback is again False, and none of the click event is fired and page gets reloaded again.
This happens only if I go like this, open up any of my webpage, keep it idle OR do nothing for about 20 minute, exactly on 21st or 22nd minute, Click on any of the button on the page, and the page gets reloaded, click event does not get fired. I debugged for this and I checked the Page.IsPostback value at this point and I got it as False after 20 minute, I don't know why. It should be True. And because of this my page gets reloaded and nothing gets submitted and every control is in the blank position once again and user have to enter everything again.
But if I enter everything and hit any of the button or Submit button within 20 minute, then everything works fine, Submit button's click event is also gets fired and everything works perfect.
And this is happening in all of my page. I am not sure what configuration is wrong.
But just for more details, I have a master page, I am using Telerik Controls and I have session Timeout set as 60 minute everywhere, in web.config and in IIS settings and in my App_Pool also. On my Master Page, I have ASP:ScriptManager, Tekerik:RadMenu, ASP:ContentPlaceHolder controls and some other controls and javascript code too.
[code]....
View 9 Replies
Similar Messages:
Apr 16, 2010
I have a page with a (gridview nested within a gridview) in an UpdatePanel (UpdateMode="Conditional"). The nested gridview drops down when you click on an arrow and then you can click on each subgrid rows command field. The gridviews are loaded from the Page_Load event. When I click on the commandfield in the subgrid the Page_Load fires during the partial page postback. From what I have read this is normal with UpdatePanels. But What I don't understand is why both Page.IsPostBack and ScriptManager.GetCurrent(Page).IsInAsyncPostBack test false after I click on the command field in my grid. I need to stop the rebinding of the gridviews ( which causes the subgrid to collapse ) when the command field is clicked.Also: I am using MasterPages and the <asp:ScriptManager ID="ScriptManager1" runat="server"> </asp:ScriptManager> is located in my mater page form section.Would anyone have any suggestions how to test if a partial page postback is occuringHere is a link to the page source: http://pastebin.org/153774here is a link to the code behind: http://pastebin.org/153781
View 2 Replies
Mar 23, 2011
I'm developing a custom URL Rewriter for a ASP.Net 3.5 project. This rewriter is not functionally different than most rewriters out there, the only difference being that the friendly URL collection is not loaded from a web.config file -- it's coming from a database instead. I made the naive assumption that it would be easy to develop a custom rewriter module from scratch, but now I know the mess I put myself in. I digress; let's go straight to the technical issues.
While testing the rewriter, I set up a friendly url that would take the user to a web form. Postbacks from this form should not alter the friendly address, as anyone would expect, sohttp://my.web.site/app_root/FriendlyURL is always rewritten asttp://my.web.site/app_root/not_friendly/form.aspxThings are fine when the browser first loads the FriendlyURL. The page comes up and is completely functional. However, when the form is posted back to the server, the page simply reloads but, at server-side, IsPostBack is false. It's like F5 was hit, except that a HTTP POST had indeed occurred.Unsurprisingly, when the interaction occurs through the "unfriendly" URL, the POST action triggers the postback as expected. This evidence suggests that HttpContext.RewritePath is somehow messing with the page lifecycle in a way that it loses sense of the postback operation.
View 1 Replies
Feb 27, 2010
I have an asp.net page that sets a few session variables. On my development machine (localhost), I do a postback and the session values are still populated.
When I Reload the page by clicking on the url bar and pressing enter the session variables are still there.
However when i deploy this page to a webserver, the page still retains the session values when doing a postback, but as soon as i click the url and press enter the session values are lost (where the ispostback = false)
But when i press the refresh button the session variables are present (but i do get a popup warning me that the page data needs to be resent!)
i am running IE 7, and the webserver is iis6 what am i doing wrong?!
View 2 Replies
Oct 7, 2010
When Session attribute Cookieless ="True" the page.Ispostback is always false.Cant understand the reason behind it.
And one more thing what is happening when we click Remember Me option in login control.As per my knowledge it is storing authentication cookie in it. If we can add data to authentication cookie then why we need session...we can add session data in that.. and authentication token is also regenerated for every new request like sessions.....i got confused after browsing for few hours.
Which one is more secure using cookies or URL for authentication and session.
View 1 Replies
Feb 23, 2010
I want to redirect to login page when any page is idle for 5 minutes and after re login I want to redirect to the page user is earlier in .
View 2 Replies
Apr 23, 2010
I have a strange problem, my webform is loading twice.
when i debug i see ispostback is showing false for both times.
what happened to the first time load , and the viewstate.
What can remove all info from viewstate and making the ispostback again to false.
i am having real difficulty figuring out what is causing this problem.
View 3 Replies
Sep 29, 2010
I am working on rewriting URLs Urlrewriting.net, and have run into what seems to be a common problem but I can seem to fix it. I'll present a simplified case.
The URL rewriting is working perfectly with the rule:
<urlrewritingnet rewriteOnlyVirtualUrls="true" defaultPage="default.aspx" defaultProvider="RegEx" xmlns="http://www.urlrewriting.net/schemas/config/2006/07">
<rewrites>
<add name="catalog" virtualUrl="^~/catalog/(.*)/(.*).aspx" rewriteUrlParameter="ExcludeFromClientQueryString" destinationUrl="~/catalog.aspx?cid=$1&c=$2" ignoreCase="true"/>
</rewrites>
</urlrewritingnet>
On the page I have a DataList with 2 asp:buttons inside. When clicked, the page refreshes but does nothing.
I followed ScottGu's article to impliment a form control adapter to rewrite the action of the form to match the rewritten URL.
Page URL in the browser:
[URL]
<form name="aspnetForm" method="post" action="/dev/catalog/13/Music.aspx" id="aspnetForm">
I now see the correct URL on the form action, and when debugging I can see the page load event firing.
The problem now is that every time the page loads Page.IsPostback is false, causing the page to rebind the DataList and therefore ignore the ItemCommand the buttons should be triggering.
if (!Page.IsPostBack)
PopulateControls();
I'm using .NET 3.5 SP1, there is a ScriptManager on the master page but no UpdatePanel on this page. I've also tried resetting the Form.Action property and bypassing ScottGu's solution with the same result. If I go to the page URL directly without using the rewriter everything works fine.
View 3 Replies
Jan 17, 2011
I dynamically add the webcontrol in onInit or onload (page_load). it will cause the second post back and with the ispostback==false;
if first enter the page is no problem. but if I click on the some button. it will trigger postback two times.
first time: ispostback = true.
second time: ispostback = false.
the second time postback caused me headache because all my value has been initialized due to the coding like below:
DataTable _temp;
if(! ispostback)
[Code]....
View 2 Replies
Apr 22, 2010
What is the best sequence order for Page.IsPostBack and User.Identity.IsAuthenticated? From what I have search for, this comes up most common:
If Not Page.IsPostBack Then
If User.Identity.IsAuthenticated Then
~Some kind of code~
End If
End If
Is this considered "best practice" or can the two items - Page.IsPostBack and User.Identity.IsAuthenticated -be split into their own sections so the fuctions of these can be independent of each other?I am trying to troubleshoot a placeholder that disappears from a master page when a content page button is pressed to change the content pages active view (I have a multiview w/ 5 views inside of it).
View 2 Replies
Jul 19, 2010
when i leave my page idle for about 2 minutes.
When i do a postback from my linkbutton it fails.
The browser then shows "Internet Explorer cannot display this webpage" I then also receive a Request Time Out in the event log.
Does anyone have similar experience with this, not sure what could be causing this since it happens on all pages in my application.
View 8 Replies
Feb 19, 2010
I have a page that have a combobox and a button, when the user select something from the combobox and hit the Go button they are redirected to the page with the desired variable.
[Code]....
The problem appears when the page was not used from more than 20 minutes and the user select something from the comboBox and hit Go Button the receive a page indicating the Error 404.The only thing that I try is to use a javascript code that Refresh the page every 15 minutes but is not nice to see a page refreshing without a reason.If someone can have a way to identify what can be done in this problem, Its going to be a huge help.
View 2 Replies
Feb 1, 2010
In a page hving some textboxes and dropdownlists with every control having server side validation controls.On selecting a dropdown all the validation controls are disappear and on clicking the save button the page remains idle.
View 3 Replies
May 28, 2010
I want to don't let the page to go back ,for that i am using the code to expire the page after the first time it loads so that when second time the page will load it will not find the such page in cache ,but problem is that my code is not working propely when i am using page.Ispostback, iam inserting my code here[Code]....
View 1 Replies
Dec 12, 2010
in my web site there ar 4 links i want when user login on my site after 20 minute automatcaly logoff and go to home page using session?
View 11 Replies
Feb 28, 2011
I have asp.net webpart page with close and minimize buttons for the webparts.
These buttons are disappering if page remains idle for 1 hour
View 3 Replies
Mar 28, 2011
What is the best approach to prompt user, if he is idle on webpage from last 5 minuts.
i mean how to know that use is idle on web page from last 5 minuts.
View 2 Replies
Feb 25, 2010
If the leave the webpage (any webpage) on my web application for a while (say 15 min), if I again click on another page it takes a long time to load (20 seconds)
I had a look through the google chrome --> developer module and found that, it is the web page which is the culprit here and the 'LATENCY' time for it is 17 seconds !!! and the actual 'download' time is only 117 ms.
A. what could be the cause of this issue?
B. What can I do to fix it?
View 3 Replies
Nov 12, 2010
I have IIS 7.5 running on windows 7 64 bit machine.
My problem is that in my web application after any page request if the page remains idle for more than 2 mins, it stops responding. For e.g. lets take the following scenario:
1. Initial page request
2. the page stays idle for 2 mins
3. Click a button to save data
4. It takes very long for the aspnet worker process to reach page_load, and firefox shows "connection was reset" message.
I put breakpoint on page_load. It strikes the breakpoint after a long time and also it does not go to the event handler of the button that was clicked.
The web application works perfectly if the page is not kept idle.
I am not using sessions in my web application.
View 3 Replies
May 9, 2010
I have a problem in my web site ...
When ever i left my website idle ...
The following message is displayed ...
After this message is displayed , no pages is able to access ....
The error message is :
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster
View 2 Replies
Jul 26, 2010
I want to pop up a message box when page.isvalid = false. How to do that?
[code]....
View 3 Replies
Aug 17, 2010
I have cause validation true on button. And I am checking the Page.IsValid in c# code. But its always returning false value?
View 2 Replies
Aug 23, 2010
Is there a way to disable request validation for just certain textboxes instead of the whole page? I'm using Server.HtmlEncode/Decode because users are legitimately using < and > characters but I don't want to use ValidateRequest="false" on the whole page because someone could add a textbox later and forget to escape the input in which case I would want validation to occur so the error would be discovered rather than be vulnerable to html injection. It seems like there has to be a simple solution but I'm not having any luck finding it.
View 1 Replies
Mar 1, 2010
I have an webforms app that loses it's session variables on response.redirect. I've read Bertrand Le Roy's blog about this and still can't get it to work. The page works in production. However, when I try in the VS2k8 IDE, the session variables are there right before response.redirect and on the first line of the next page, the variables are nothing. I've confirmed the session id is the same so I'm not skipping sessions. The target page is relative so the web server doesn't think we're changing sites (as confirmed by the sessionid).
Response.Redirect("menu.aspx", False)
View 1 Replies
Feb 26, 2011
I have a registration form which is working perfectly well, I need to enhance it slightly from where it is. As it is users are able to register for an account wether the email has been previously used/allocated in the user db.A client side call to the IsEmailAvailable function works great, just not working correctly server side. Here is the code.
My function:
[Code]....
And my if statement:
[Code]....
So my question is, how can I pass the end value of the IsEmailAvailable function to my if statement correctly.
View 4 Replies
