Web Forms :: Nested Generated LinkButtons & Hidden Divs With Arguments
Feb 26, 2010
I've googled all over for a solution but I cannot seem to find it or understand it if I have looked at. What I want to do is click a link that I generated from txt data that will unhide my div and generate a new series of links. In order to generate these links I need to pass an argument. Then I want to click a generated link (now the 2nd level) to unhide another div and generate another list of links (now a 3rd level) with an argument.
It sounds simple but once I click the 2nd level link (the 2nd generated link) I lose everything as the page reloads. I understand that when I click the 2nd level link it is posting back to the page and wiping out my variables maintaining my generated links. Below I've attached some code that simulates my problem (minus the file calls for generating links). The first link(generated and placed in a panel) reveals div with another set of links based on an argument. The third link (the second link hides the first div) is suppose reveal another div with the message "YAY". The third link does not display the second div but instead refreshes the page.
[Code]....
View 2 Replies
Similar Messages:
Jan 31, 2011
I was just after some help to put the following code into a loop. I have 6 div's with id's ImgDetails1 - ImgDetails6 and 6 buttons
with id's 1 - 6
if 1 is pushed it should hide the other divs but ensure div1 is shown. the same applies for every other
div.
I can do this the long way writing logic for each div but I am not the best with js and have failed
at each attempt to put the code in a 1 - 6 loop to hide all divs except the one selected and make sure that is shown.
[Code]....
View 4 Replies
Apr 6, 2010
I'm sure I've seen examples somewhere before, but I can't seem to find them. I have a page which has 5 buttons. I'd like each button to load up a different form, without refreshing. I could use UpdatePanels, but it sounds overkill for this (and bandwidth-costly). I'd like to load all the forms in one go, so clicking through the buttons essentially hides/shows the relevant forms. I can't do this using the html() method (as-is) since the forms can be quite complicated and contain ASP.NET controls which postback to the server. Instead, I've put the forms in individual divs. I tried doing something like this:
case "button1":
$(".current_form").show();
$("#divForm1").prependTo($('.current_form'));
break;
case "button2":
$(".current_form").show();
$("#divForm2").prependTo($('.current_form'));
break;
The problem with this is that the old form always remains there, rather than being replaced. Is it possible to attach a div to a given container in JQuery? Or is there another method which may be better?
full code
<script type="text/javascript">
$(document).ready(function() {
$("button").button();
$("button").click(function() {
switch ($(this).attr("value")) {
case "button1":
$('.current_form').empty().show();
$("#divForm1").clone().prependTo($('.current_form'));
break;
case "button2":
$('.current_form').empty().show();
$("#divForm2").clone().prependTo($('.current_form'));
break;
}
return false; //prevent postback
});
});
</script>
I'm testing with these divs:
<div class="current_form">
<div id="divForm1" >
This is div 1
</div>
</div>
<div class="current_form">
<div id="divForm2" >
This is div 2
</div>
</div>
View 1 Replies
Sep 30, 2010
i am trying to reer datalist into divs rather than td tr, if u have any tutorial or any refrence than post it here....ur replies would be appriciable.
View 2 Replies
Jul 24, 2010
I have created a horizontal menu using <UL> and <li> tags. Hovering over a top level <ul> causes the lower lever <li>'s to drop down. This works well but there are two narrow <div>'s below that act as decoration. These disappear when the drop down submenus lay over them. I have played with the z-index properties of both lower <div> and of the menu items but have not resolved the issue. I want the submenus to drop down over the <div> but for the <div> to remain visible outside of the covering sub-menu.
[Code]....
View 2 Replies
May 24, 2013
I have created Dynamic LinkButtons. Each of which has a click event and some particular output, Its working fine this way. E.g.
when i clicked ASPsnippets message is "Hi asp snippet"
when i clicked Google message is ""Hi Google"
But
"Hi asp snippet" is removed when iclick GooglE
View 1 Replies
Aug 5, 2010
I need to display a set of linkbuttons(nearly 30)with different descriptions.
when i click on a linkbutton an associated querystring(which is not description)is supposed to be copied to a textbox.
View 2 Replies
Jun 17, 2010
Is there a better, cleaner way to do this in ASP.NET 2.0?
An ASP.NET 2.0 page displays a datalist of records. Each record can have many dates, so the dates are in a nested gridview (I chose a gridview over a datalist here because we want to be able to delete a date and this is easier done in a gridview). The parent record can never be deleted.
The display works fine: the nested gridview gets its datasource during the parent datalist's OnItemDataBound event.
The problem: the nested gridview's delete function. The date gets deleted without a problem (handled in the OnRowDeleting event), but somehow the redisplay is untying all the other nested gridviews from their datasources. The delete does not appear to cause a page postback, so I don't know how the other nested gridviews are losing their datasources.
View 3 Replies
Dec 1, 2010
I have several divs on an asp page. All of my divs are runat="server". On the initial load of my page I set all the divs visible property to false because I dont want them to appear on the first show. Then, I have a drop down list raising postback events.
On the selected index changed event I am setting the visible property of my divs to true to make them appear on the page. However this does not work.
I discovered that, on the initial load non of my divs are added to the page's html content. So, on a postback event non existing divs can not be made to appear. If all the divs would set to visible = true on the initial load, postback event would work just expected.
Could any one tell me a way to hide divs on the initial load and make them appear on a postback event?
View 3 Replies
Jan 9, 2010
I am working on a web application project in which i add a dynamic number of LinkButtons at runtime according to user selection, each link should redirect the user to a specific web page ,but what actually happened is that the last hyperlink is the only one responded! the following code show the declaration :
''''''''Public WithEvents ItemName As LinkButton
''Public Sub AddLinkButtons
''''''''For i = FirstIndex To StopFlag
''''''''ItemName = New LinkButton
''''''''ItemName.Text = Dt.Rows(i).Item(1)
''''''''Me.ContentTD.Controls.Add(ItemName)
''''''''Next
''End Sub
''''''''Private Sub ItemName_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles ItemName.Click
''''''''SelectedItemToFind.ItemFlag = 1
''''''''SelectedItemToFind.SelectedItem = sender.Text
''''''''Response.Redirect("Default.aspx?Main=SearchResult")
''''''''End Sub
View 4 Replies
Jan 11, 2010
how to get a textbox to run a linkbutton's click event when enter is pressed on the keyboard in a web form?
View 4 Replies
Feb 9, 2011
I've been struggling with this for several hours now so I thought I'd give this forum a try. The problem is that I'm adding two kind of buttons (editBtn and delBtn) which show up fine but they won't fire their respective method when clicked. I also have a third button which works just fine.
[Code]....
[Code]....
View 11 Replies
Mar 3, 2010
I am working on an app where i am having some linkbuttons in master page. I want to display them depending upon the authorization given to them once they logs in. I have initially made all of them visible false and then i am checking the authorisation in the aspx.cs class of master page. I make the link button visible depending upon the right granted to the user. But it is making all the link buttons visible. Instead it should only make two of them visible and rest should be hidden. Following is my code from MasterPage.aspx.cs:
[Code]....
This is how i use them in aspx file:
[Code]....
View 4 Replies
Aug 26, 2010
I'm trying to conditionally hide 2 link buttons within a Gridview(gvPosts), ModifyButton and DeleteButton. I want the two buttons to hide in every row where the currently logged on Username is not the same as the Username in gvPosts' lbEmpID, a LinkButton control in the same row. Unfortunately the code is hiding the buttons in every row, including the one where lbEmpID.text = Profile.Username. My code is below, what am I doing wrong?
Dim lbtn As LinkButton
For Each rowItem As GridViewRow In gvPosts.Rows
lbtn = DirectCast(rowItem.Cells(0).FindControl("lbEmpID"), LinkButton)
If lbtn.Text <> Profile.UserName Then
Dim Modify As LinkButton
Dim Remove As LinkButton
For Each rowItem1 As GridViewRow In gvPosts.Rows
Modify = DirectCast(rowItem1.Cells(0).FindControl("ModifyButton"), LinkButton)
Remove = DirectCast(rowItem1.Cells(0).FindControl("RemoveButton"), LinkButton)
Modify.Visible = False
Remove.Visible = False
Next
End If
'If chk.Checked Then
'Response.Write(chk.ClientID + "<br />")
'End If
Next
View 3 Replies
Mar 25, 2010
I have an issue with linkbutton in asp.net gridviews or any data control.it doesn't work on single click.Is there a way to overcome this issue.
All my datacontrols are wrapped inside updatepanel with updatemode=Condtional.
View 3 Replies
Dec 5, 2010
im showing 3 rows and 2 columns in a Gridview...I want to generate a 3rd column at runtime in a Gridview ....
only 1 LinkButton in Gridview at position row1 and column 3
only 2 LinkButton in Gridview at position row2 and column 3
only 3 LinkButton in Gridview at position row3 and column 3
View 8 Replies
May 11, 2010
[Code]....
I have a GridView attached to an ObjectDataSource (returning a DataTable) in a UserControl. The code is really simple. Data comes down fine when the page is first rendered. When I click on Select or Delete (inside TemplateFields), RowCommand is supposed to fire but it doesn't, the page goes straight to Page_Load. I literally have 0 other event handlers that are set on this control and everything else in the codebehind shouldn't even fire if it's a postback. Also on postback, the Select and Delete buttons disappear. It looks like the TemplateFields are still there but they're empty. The data fields (all of two columns) post back fine.
UC ASPX Code:
[Code]....
Code Behind:
[Code]....
containing UC:
[Code]....
And here is the code from the ObjectDataSource:
[Code]....
View 7 Replies
Jan 7, 2010
I have a GridView in an update panel that is bound (in code-behind) to a business layer object. The first time this page is accessed, Editing, Deleting, Updating, etc. work fine. However, if I click my browser's refresh button, the functionality of the edit, delete, etc link buttons is gone. They do nothing.
here's my code:
[Code]....
Here's the code-behind:
[Code]....
View 7 Replies
Mar 1, 2011
I'm trying to create a nested gridview, but I'm stuck at the editing/deleting part of the nested gridview. (Below is my code).The nested gridviews are filling out nice, I've set the DeleteParameter in the SQLDataSource, but I'm still getting this error when trying to delete a criteria: 'The Gridview 'gvCriteria' fired event RowDeleting which wasn't handled.'I've tried to create a method 'gvCriteria_RowDeleting', but that didn't seem to work out.Someone who can give me a piece of advice? Would it be possible to fill the gridview without using gvDomain_rowDataBound? Dries
[Code]....
[Code]....
And the C# behind:
[Code]....
View 10 Replies
Nov 21, 2010
I am having a problem floating div's inside the AJAX TabContainer. The content I place inside the TabPanel is jumping outside the border. Here is the code:
<%@ Page Title="" Language="C#" MasterPageFile="~/Site.Master" AutoEventWireup="true" CodeBehind="EquipmentDetails.aspx.cs" Inherits="DocumentSandbox.Web.WebForm4" %>
<%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="asp" %>
<asp:Content ID="Content1" ContentPlaceHolderID="head" runat="server">
</asp:Content>
<asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server">
<asp:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server">
</asp:ToolkitScriptManager>
<asp:TabContainer ID="TabContainer1" runat="server" ActiveTabIndex="0">
<asp:TabPanel runat="server" HeaderText="TabPanel1" ID="TabPanel1">
<ContentTemplate>
<div>
<div>
<div><div>ID:</div><div>
<asp:TextBox ID="txtID" runat="server" CssClass="criteriatextbox"></asp:TextBox></div></div>
<div><div>Phone Number:</div><div>
<asp:TextBox ID="txtPhoneNumber" runat="server" CssClass="criteriatextbox"></asp:TextBox></div></div>
<div><div>Address:</div><div>
<asp:TextBox ID="txtAddress" runat="server" CssClass="criteriatextbox"></asp:TextBox></div></div>
</div>
<div>
<div><div>Last Name:</div><div>
<asp:TextBox ID="txtLastName" runat="server" CssClass="criteriatextbox"></asp:TextBox></div></div>
<div><div>First Name:</div><div>
<asp:TextBox ID="txtFirstName" runat="server" CssClass="criteriatextbox"></asp:TextBox></div></div>
<div><div>Middle Name:</div><div>
<asp:TextBox ID="txtMiddleName" runat="server" CssClass="criteriatextbox"></asp:TextBox></div></div>
</div>
</div>
</ContentTemplate>
</asp:TabPanel>
<asp:TabPanel ID="TabPanel2" runat="server" HeaderText="TabPanel2">
</asp:TabPanel>
</asp:TabContainer>
</asp:Content>
Here is the css for this code segment:
.searchcriteria
{
}
.searchresults
{
clear: both;
}
.criteriacolumn
{
float:left;
width:500px;
}
.criteriarow
{
width:498px;
height:24px;
padding-bottom:2px;
}
.criteriatextbox
{
padding-top: 3px;
float:left;
width:285px;
}
.criterialabel
{
width:200px;
padding-right: 6px;
text-align:right;
float:left;
}
I found a possible solution here: [URL], but I'm hoping for another option before I give up on having a border.
View 3 Replies
Dec 3, 2010
I have 2 divs with 2 nested divs in them. Let's say div1 contains div11 and div12 and div2 can also contain div11 and div12. I know that this is not normally allowed but I am using jTemplates and they do allow you to print the div11 and div12 twice or more on the same page. The HTML looks like this:
<DIV1>
<DIV11>Some text</DIV11>
<DIV12>Some text</DIV12>
</DIV1>
<DIV2>
<DIV11>Some text</DIV11>
<DIV12>Some text</DIV12>
</DIV2>
How do I ensure that I only have one div with the unique ID loaded on the page, so I don't get in any duplicate DIVs. The result should look like this:
<DIV1>
<DIV11>Some text</DIV11>
<DIV12>Some text</DIV12>
</DIV1>
<DIV2>
Some other text
</DIV2>
Is there any way to check for a duplicate ID in either jQuery/javascript language and remove all but one using each or some other method?
View 3 Replies
Apr 7, 2010
I'd like to have a div as a canvas, where users would choose images to show, out of a list. They will choose what background it would have, icons, and they will upload an image which will appear in this canvas too.I'm looking for solutions in PHP or ASP.NET.
View 1 Replies
Mar 23, 2011
Problem in code adds to the same div? I need it to add multiple divs of the same id.Atm it takes all the seperate entitys or colums in my database and places them in the one div called I was hoping it would add for each record in my database which is equal to the userid in my sqlsyntax.
How can I achieve this?
Code:
using (OdbcCommand cmd = new OdbcCommand("SELECT Wallpostings FROM WallPosting WHERE UserID=" + theUserId + "", cn))
using (OdbcDataReader reader = cmd.ExecuteReader()) [code]...
I need it to look like this:
<div id="test1">
<div id="mysqlcontent">record 1</div>
<div id="mysqlcontent">record 2</div>
</div>
View 3 Replies
Dec 6, 2010
I have inherited a web application that uses tables to layout the whole web application. This is a rather large web application and I would like to migrate it to using divs for layout instead of the current birds nest of tables.Does anyone have any good suggestions for the best way to migrate the web site to using divs (That would convince the boss that it's worth doing).This is a asp.net web application where most of the html is done through response.write.EditI have been working with the site for a while now and would have to say that even a site with a badly nested div layout would be better than using table layout.
View 1 Replies
Jun 24, 2010
Searching on google, i deffinitly can't find a non-javascript way to show and hide my panel/updatepanel.I do have panels and updatepanels, I want to show/hide them on the fly, after a button click, preferably without javascript, or if so, with jQuery.All the examples I found consumes a lot of code and honestly I don't want to crap out my code just because of this.
View 2 Replies
