Web Forms :: Open URL On Wizard Finish?
Mar 31, 2010
I have a wizard control, on the finish step the user clicks submit and the code then retrieves a url from the database. I then want to open the url in a new window.Would anyone be able to give me some guidance on doing this, I am using VB.
View 3 Replies
Similar Messages:
Feb 19, 2010
I have an asp.net wizard control with the "finish" button defined in the FinishNavigationTemplate. I would like to access that button in code to give it focus if finishing the wizard does not complete.I've tried doing a FindControl on the WizardStep like so:
Button b = (Button) wsReviewOrder.FindControl("FinishButton");
I've tried doing a FindControl on the entire Wizard control like so:
Button b = (Button) wCheckout.FindControl("FinishButton");
View 1 Replies
Apr 21, 2010
I am adding wizard steps dynamically (not the wizard itself). I am adding 'n' wizard steps and step type is 'auto'.
I also have one <asp:Button ID="btnSubmit" runat="server" Enabled="false" ....../>
I want to activate "btnSubmit" when the user clciks "FINISH" on the last wizard step (Note: Each Step Type is 'auto')
View 4 Replies
Jan 7, 2010
data source configuration wizard empty when i open it
i was trying to copy the dialog box but was un able to do so.
it used to work but today it is just empty i am not sure what to do
View 1 Replies
May 18, 2010
When i open the The Configure Data Source wizard, the "Specify columns from a table or view" shows gray, I cannot choose it. How can I do it.
View 4 Replies
Jul 14, 2010
I am trying to use wizard in an update panel but the wizard is disappearing when I click for the next or prev step button. I only want to close wizard , when I click the finish button. How can I do this ?
View 1 Replies
Jan 28, 2011
Is there a way of stopping the main page waiting for a usercontrol to load before it can finish loading?
I have a usercontrolthat has to do a lot of DB calls which can take a few seconds making the page slow to load. Ideally I'd like the main page to load straight away and then the usercontrol content appear when it is ready.
View 4 Replies
May 10, 2010
I have to call a function to run a report through a web service, then call another function to get the data but only after the 1st function has finished processing. How do I make c# wait till the first function has finished processing to run the second function?
my code looks something like:
NetworkCredential Cred = new NetworkCredential("uid", "pw");
ReportWebService reportService = new ReportWebService();
reportService.Credentials = Cred;
string s = reportService.runReportAsync("0ede9884e6394daf73fa418e9bffd4fc");
string report = reportService.getReportData(s);
This code will break because s is not set since the function (runreportasynch) has not finished running to produce s.
View 1 Replies
Mar 8, 2011
I need to run a exe file in server. I use proccess.start to do this. When the process.start finish then the session is lose and I lose the user with I login.
View 1 Replies
Aug 8, 2010
i am doing a page to sell files online
the paying method is by a card or bank account and the customer is not registered to the site so i want to make sure that the customer has downloaded the file successfully after that the system completes the payment operation.
View 3 Replies
Mar 30, 2010
i would like to use script manager and update panel in different domain to accommodate an other domain web site inside a iframe, but it prompts me a an error alert box (An error has occurred in this dialog. Error: 54 Permission Denied), may i know why?
Is that any solution to solve the problem?
Secondly, in the different domain, the JavaScript function EndRequest(sender, args) is not work after finish the loading whereas the InitializeRequest(sender, args) is work. May i know why?
View 2 Replies
Feb 19, 2010
We are using a custom MembershipProvider to authenticate the user.This works just fine. But when installing this at a new customer ValidateUser() suddenly takes a "long" time (15 sec) to finish.It usually takes less than or just 1 sec. The users find this very annoying (so do we).Does anyone have an idea where to start adjusting settings or what to look in to?
View 4 Replies
Feb 17, 2011
I have an asp.net page that contains an Iframe embedded with some data and a ImageButton. On ImageButton click event (server side) I have Response.Redirct:
Response.Redirect("results.aspx");
This always open the results.aspx in iframe. I want that results.aspx should always open in the parent window. I tried the following till now but none worked:
Response.Redirect("<script language='javascript'>self.parent.location='results.aspx';</script>");
Response.Redirect("javascript:parent.change_parent_url('results.aspx');");
..and also tried the options from [URL]
View 1 Replies
Aug 28, 2010
In my application users upload their word document and user has been given an option to preivew the uploaded document. Inorder to preview the document i put the following code in my page_load event
div1.InnerHtml = "<iframe name='iframe4' src='DocumentUuploaded/report.doc ' target='iframe4' frameborder='no' height='500' scrolling='no' width='800'></iframe>";
The problem is it is asking Do you want to open or save this file. How can i get rid of this dialouge box
View 3 Replies
Feb 22, 2013
I have created a pdf file using aspose and need to open it without saving the pdf.Is it possible.
View 1 Replies
Feb 10, 2010
In code below, when I have more than one DIV open and I choose to sort one of the GridViews, all the other Open Div's will close automatically. How can i keep the DIV's in the state they are in when I sort any GridView?
[Code]....
View 3 Replies
Sep 11, 2010
Click imagebutton open window.open in class asp.net 2.0
View 2 Replies
Jul 14, 2010
Anyone have this problem. When you write a ex. label name or label text in the properties window, it look like its updating the text before you actually are finish. This make you type over what you allready wrote. Its not a big problem,
View 2 Replies
Sep 14, 2010
I am having problems with W3C validation.The error is... Line 39, Column 152: there is no attribute "height"Line 39 read.....
</table><a id="ContentPlaceHolder1_MainContentPlaceHolder_Wizard1_SkipLink"></a></td><td height="100%"><table cellspacing="0" cellpadding="0" height="100%" width="100%">
Is there any thing I can do to get around this?I only have this one error in the website so am keen to clean it up.
View 5 Replies
Nov 5, 2010
have a C# 3.5 WebApp that has a Wizard Control in it.When I am at work it shows and work fine, I have brought the app home to work on it and for some reason the Wizard will not show when I run the app.I can see it in Design mode, and even see it in the code if I View Source on the page.
View 2 Replies
Oct 10, 2010
I have Wizard steps in a a Wizard control. Each step looks like a form with textboxes and dropdowns for users to complete. I don't want to lose the data as user completes each of the wizard step.
1. I'm thinking about saving user input to sql database when user clicks the next button with each wizard step but I wonder if this is wise since it would create many runs and writes to the server? If not the best way then what method should I use? I just don't want user to lose data if browser crash or for any reason.
2. Or should I use the DataBinding option in the Wizard? Would this be a better performance?
3. Another concern I have is that there are on average about 7, 8 HTML-Server CONTROLS (I added id and Runat="server" to the regular html controls) in a wizard step. If I load up all 7 steps and each step has 8 controls then is that a lot of controls? Wouldn't that affect performance easily when there are a few more users access this web app? Maybe I shouldn't use Wizard for this then? I should just have 7 forms and each form would have Next and Prev buttons that takes users to whatever page they want?
View 2 Replies
Oct 1, 2010
I am looking to implement a Wizard for my Web Form, please could somebody give me suggestions as to which approach would be best jQuery or ASP.NET Wizard control? give links describing the implementation, if possible.
View 1 Replies
Feb 17, 2011
I have a table in my database which consists of cID | cName| form1|form2| form3|form4| the form fields above are all checkboxes selected when the customer entry is done. there are they represent four forms that I have and are to be displayed later. I have a gridview that displays only cID and cName with a select link against each record. what I want to achieve is, when user clicks on the select link against a record, all the four fields are checked (whether true or false) and user is presented with the selected forms ONLY! how can I add this condition checking functionality to the select link? is there any alternate method to achieving this??
View 6 Replies
Feb 8, 2010
how to i can use listview control with ado.net(without wizard),and insert image in itemTemplate when nothing is present in html code section....(i use an sql query to retrieve data,and i have image name in db,but i dont know howto show it in listview)
View 1 Replies
Jan 18, 2010
I have a wizard control and in one of the steps, I checked the input box if it's blank or not. By doing this, now the sidebar link and other steps all cause validation = true. How can I resolve this problem so that the cause validations for sidebars and other steps are false?
View 6 Replies