What would cause a single webpage to load slowly? I have javascript within the <head> element. The html consists of 2 <div> elements and within these <div> elements are a bunch of <table> elements and that's it.
The functionality of this site is such that each <table> element contains data that during the "onload" event, these <table> elements are hidden. Each <table> elements is controlled by an HTML menu (the menu itself is an html table). When a menu item is clicked, it will either display or hide the <table> element depending on whether it is already displayed or hidden.
If the leave the webpage (any webpage) on my web application for a while (say 15 min), if I again click on another page it takes a long time to load (20 seconds)
I had a look through the google chrome --> developer module and found that, it is the web page which is the culprit here and the 'LATENCY' time for it is 17 seconds !!! and the actual 'download' time is only 117 ms.
I just published a very small site to GoDaddy that I programmed in Microsoft Visual Web Developer 2008. The site only contains 6 sheets, none of which are data intensive. Each has a few small images that serve mostly to navigate to the other sheets. There is no data, no SQL, nothing like that. There is one master page that governs the page layout for all of the pages. Everything works fine, for the most part. I am posting because the site loads quite slowly, particularly considering how little content is being loaded. Can anybody give me any advice about what I should look at to speed this thing up a little bit?
i have used some Ajax control toolkit in my web project. but the problem is that my web pages are loading very slowly because of ajax control toolkit, when i remove this web pages are working very fine and fast. I am using vs 2012 and framework 4.5..
The problem with my web application is when ever i load the home page - The master page as well as content page loads ---This seems fine but when i navigate thorugh the website which have the same Master page but diffrent content page .... the master page loads again. What i want to do is ..I want to keep the master page intact and only the content page loads. How can I accomplish it..
i have seen many site where individual web parts load with busy icon when page loads. without using web parts how can develop a page where individual section will load with busy icon when page loads.
I have a master page 'Master1' and i have used a content place holder 'content1' and loads pages 'Page1' and 'page2' in the 'content1'. Is there any way to identify which page is loaded to the content place holder whether it is 'Page1' or 'Page2' dynamically.
have an ASP.Net 2.0 (VB) application which connects (SQL Authentication) to SQL Server 2008. I publish the application to our intranet. The start page is frmMain.aspx. I RDP to a "neutral" PC (one like our users have) and the site loads fine the first time in. The users cannot bring up this application, however (it does not load--times out). They have been able to run this application before from this same intranet location and have not had problems. I have re-published the site, but this behavior continues.
I have a created a web portal in multi-language. I put all the pages related to "english-language" in one folder (/english) and "arabic-language" in one folder. I didn't have a default.aspx in my root folder(wwwroot), its in /english folder. There is no index.htm or default.aspx page in my root folder.I am very confused how can i redirect the default.apage when page loads. The default pages is stored in /english folder.
Does anyone have any problems with Page_Load being executed twice in Google Chrome? It's a short question, i do not know what else to explain...
I have a simple asp.net page and in Firefox and IE all it's working fine. But in Chrome the Page_Load is fired twice...
Later EDIT: - what is strange is that i have 4 repeaters... binded with random values. The random methods are twice fired (because of page loaded twice) but the repeaters takes the INITIALLY values...so, the 2nd post back is somehow raised after the rendering step.
3rd edit: It happens ONLY at the refresh!
Solution (in my case): There was an empty img src, and that was the cause
In my global.asax file for my ASP.net project, I am checking for certain conditions. When those conditions are met, I want to automatically execute javascript code when the page runs.
This is my code:
if condition Then Response.Write(" < script type=""text/javascript"" > ") Response.Write(" // Javascript code to do stuff ") Response.Write(" < /script > ") End If
While this appears to work to execute the Javascript code, I don't think it's a best practice because this code will preceed all of the HTML of the page that gets loaded.
What is the best way of programmatically tacking on some extra Javascript code to be run when my page loads?
I click the continue button which does a post back but the values are not updated until I refresh the page again which makes me think the js isn't being run until after the page is returned. I'm wondering how to have the values updated when the page is refreshed after the button postback.
In the code behind of the aspx page, I wanted to append a event (OnSelectedItemChange) to the dropdown control that isn't actually on the ASPX page (yet). However, when I try to do something like the following in the code behind:
foreach(Control eachControl in customID.Controls) { if (eachControl.HasControls) { Control DdControl = eachControl.FindControl("optionValues"); //always null
[code]....
But All that eachControl has is a repeater, and it shows its childcontrol count as 0. So when it get to the FindControl method, it always returns null.
QUESTION.So what I am trying to do is add an event (OnSelectedItemChange) to the dropdownlist control inside the repeater (which is a custom control that gets added to the page if criteria is met). When a selection is made in the drop down, I want it to trigger the Event method.
How can I either: A) Find a way to add the event if the dropdownlist control exists on the page?
OR
B) A way to be able to call a method in the code behind and pass the selections from all the drop down lists (since the custom control could be added more than once creating multiple drop downs?
NOTE I don't have the code in front of me, so if I have something syntactically incorrect, please overlook. I also know that ID's are unique, so this is also assumed to be a problem with my logic. When it renders these, the ID's might be mangled by the asp name convention which I would assume I have to find a way around.
Here's is my code I just added to my DLL (using it in my website):
[Code]....
Then, in my page_load event, I just have:
[Code]....
I've added a reference to the dll and I've imported it in my page - the only other method (sub) works just fine, but with this, I get an error:Method not found: 'System.String HSIR_Common.Main.StripCurrentUser(System.String)'.
I have a few pages on my website that contain a gridview that gets bound on the page load event. Most of the time while the page is loading, about 5 or 6 rows of the gridview turn into a black box. Usually the box disappears after the page is fully loaded, but sometimes it doesn't and you have to highlight it with the mouse to get rid of it. This happens on more than one computer and I'm not sure how to fix it.
i dunno my page will load twice. when i debug, i found that in second load also is page.ispostback = false i really can't found the reason why my page will load twice without my order, and IsPostBack = False anyone got such experience b4
I have a form on my website and when the page loads I want the fields to be populated with information from the database. I have written a stored procedure to do this, but I can't seem to find the syntax to make these fields auto populate with this information when a user goes to this page.
I'm creating an "edit-your-profile-page" and I need to know how to keep the values that the users has enter between page loads. Error controls and stuff like that.
I have a page that calculates some stuff and then displays it to the user. Because the calculation part takes a while I would prefer to have the entire page load with empty data and only after that call the calculation and the display data function.
I want to run the LoadArray() function initialy when the page loads. This function is calling a pagemethod given in aspx.vb code file..
Partial Class test3 Inherits System.Web.UI.Page <System.Web.Services.WebMethod()> Public Shared Function Load_Array() As String() Dim Model_Name_old As String()() Dim mod_code As String() Dim mod_name As String() Dim cod_upper As Integer //calling webservice that retunrs a jagged array Dim ins As New localhost_insert_model.dbModel Model_Name_old = ins.get_Model_Name("A") mod_code = Model_Name_old(0) mod_name = Model_Name_old(1) Return mod_name End Function End Class
So how can i load the javascrip LoadArray() function onPageLoad in this scenario?
i have two ajax cascadedropdown combos loaded by a web service. When mi page loads, it do it before the data filled the first of the cascade combos so when page load (on the Page_load event) i try to select a value on the first combo but it is still empty. What can i do to force the load of the combos before page load? I have try combo.cascadropdwonextender.databind() on the page_load with no sucess.
I have a view that uses a partital view. The partial view is invisible when the page loads. The user then clicks a button and I use Html.RenderPartial to make the view appear.
There is a button in the partial view in which the use will click which should make the partial view disappear. How do I make the partial view disappear?
