I have a working solution, and I would like to copy it and paste in a new folder. I am creating a new version of the site, and want to build on a "copy" of the solution. But when I do it, all the paths are lost and it doesn't work. What am I missing. What is the process to copy a working solution and get it to work from new location?
View 1 Replies
I am going to deploy my MVC 2 website, do I need to copy the whole solution directory to the 'virtual folder' equivalent location?
View 27 RepliesI took over a rather large C# .NET 2.0 legacy web application from a colleague who is no longer available. This web application consists out of multiple projects in one solution. And I ran into a problem that I simply do not understand and hopefully somebody here will. The application has multiple .sitemap files included in a sitemap subfolder. So far so good. But I found one .sitemap file that was floating around in the root of the web project and is not used anywhere in the application (it's not included in the web.config).
I excluded this file. The web application runs fine without it. All menu's load correctly. Until I hit a method that uses recursion to look for certain controls (NOT the sitemap!). This method runs down through all controls from a given point and then crashes on the fact that the XMLSitemapProvider is missing this one file. This method is called many times without issues, but when the user logs out it somehow runs through a hierachical path of controls that eventually end up at the missing .sitemap file. The file also needs to be at this exact location in the root. Moving it somewhere else will cause the same crash. The file web.sitemap required by XmlSiteMapProvider does not exist.
I have searched for this filename and all ".sitemap" files but can not find it anywhere in the solution. 0 results found. I've ran past all the code leading up to the crash and it seems arbitrary (it has nothing to do with the sitemaps). The crash just happens because it hits the XmlSiteMapProvider looking for another control when it's going through all controls. In short, I can find no references what so ever to this file!
Since this web application is huge I can not manually go past every section of code. There is hundreds of thousands of lines of code. Does anybody know any other way then through the web.config to include a sitemap or how a sitemap file could be registered and where I should look? Final note: this application used localization. The sitemap's are localized and I found resources for this one sitemap. I hoped excluding those would solve the problem. Unfortunately it didn't.
I have a VS 2008 solution. I need to copy an existing .aspx page and re-name it to something else (need to make modifications to that newly copied page). But I keep getting compilation errors saying that duplicate text boxes exist. Can't I have control on different .aspx pages with the same name? How can I do this elegantly?
View 4 RepliesI have a site that was created with VWD2005. I tried to open the solution with VS 2008. This prompted me to convert it which I did. Now when I look at the project in the Solution Explorer in VS 2008, I see all of the files but they are now with in a folder named "2" that's within a folder named "back up". I also see another folder with in the solution that's named _UpgradeReport_Files.
The files for my project that are with in the folder "2" that is with in the folder "back up" are actually in the back up folder for my project in the Visual Studio 2005 folder with in My Documents. I assume this is because I chose the "create back" up option when doing the conversion. I don't understand why these files and this project aren't in the project directory with in the VS2008 folder with in My Documents.
I want all of my files for this project to be in the projects folder with in the Visual Studio 2008 folder in My documents, the same as if I had created this project in Visual Studio 2008 originally. But the conversion doesn't seem to have done this. Instead I seem to be using a solution/project that references the original files with in the back up folder as mentioned above.
Can I just create a new project in VS 2008 and paste these files into it? Will this work? I'm not sure if it will because the original one was created in VWD 2005 which I think uses the .net framework 2.0. My Visual Studio 2008 uses version 3.5 Sp1 of the .NET framework.
So I would like my solution to save in the same folder as the rest of my files. I am a win forms developer so web is new to me.
1) Is there any reason why I shouldn't do that for web.
2) Second how do I do that. I know that I can change the solution's saving location by changing ToolsOptionProjects & SolutionsProject's Location. However, I just want it to use the location of the new website I create and not that specification.
At this point only testing to see how this works.. but end result is that i need to copy a file to a new location when the button is clicked. The master file will always be available in 1 directory. The new location will not have this file. I have a very simple line of code below, but doesnt seem to copy the file over. I tried 2 ways.. one is the code below, the other was for the newloc string i didnt have the file name at the end. What am i missing?
[Code]....
I have code to copy some files. and then, how I can to show the message of process copy. I think in command prompt (cmd) we can do that with piping to file(txt file). how I can do that.
View 5 RepliesIf I have one file- name (picnew.jpg) and want to paste it to six ip's d:
Few folder drive by one action.
asp.net or cmd commands or anything else
I just published my website to my webhost, and for some reason it's giving me errors. So I copied the solution and it works correctly.
What could the problem be? I think a possible problem may be that there's a process that creates a directory so it can copy files. By copying everything from the solution to the ftp, everything works correctly. If I publish the site, it somehow does not create the directories.
Is there something I'm not doing correctly? I've published in a local folder, and then copied to the FTP. I've also published directly to the FTP. Neither of them work.
I created a search functionallity for a client site but cannot get this Enter key search to navigate to my search box. I added HTML client controls as to server controls:
[Code]....
My Javascript does fire on enter key, and it does call the "searchProducts" method but not navigating to my desired location. Here is the Javascript:
function searchKeyPress(e) {
if ((e.which && e.which == 13) || (e.keyCode && e.keyCode == 13)) {
$('#go').click();
return false;
} else {
return true;
}
}
function searchProducts() {
var searchVal = $('#s').val();
var concLoc = [URL]
window.location.href = concLoc;
}
look at the attached web.config? The last part doesn't seem to work although the path is correct. I've tried logging on the site with a use which is in no groups, but it can still access the page...
[Code]....
In IIS application pool I have set 2 in maximum worker process in process model, will application object, session object and cache object will be shared by the all worker process or will all worker process have different application object, session object and cache object.
View 1 RepliesWhen I run System.Diagnostics.Process.Start from my console application it works but the same code when I run from my web service hosted in IIS doesn't work.
Is it some thing to do with ASP.Net privileges?? if yes how can I configure it from my C# code.
We have an application that is making use of the location tag in the web.config file at the machine level - meaning like :WindowsMicrosoft.NETFrameworkv2.0...CONFIGweb.config, the one that applies to the whole server - this application has lots of virtual directories under it and for each one there is a <location path="IIS Web App NameCustomerA">...This seems to work ok for that app. But then we have a second app on the same server, and I'd like to add location tags to that app's web.config file - meaning the local web.config file in the app's directory - and have each one of them specify a location tag in a similar way
View 1 RepliesI have a small function that is in a STA thread. It's purpose is to copy the selected image in word document to clipboard and then save it to a location on the hard drive. Here is the code that works fine on XP and Windows server 2003.
protected static void CopyInlineShapeFromClipbord()
{
string imageFileName = string.Empty;
_oWordApplication.Selection.Copy();
Computer computer = new Computer();
if (computer.Clipboard.GetDataObject() != null)
{
System.Windows.Forms.IDataObject data = computer.Clipboard.GetDataObject();
if (data.GetDataPresent(DataFormats.Bitmap))
{
Image image = (System.Drawing.Image)data.GetData(
DataFormats.Bitmap, true);
imageFileName = _imageUrl + ".gif";
image.Save(imageFileName, ImageFormat.Gif);
_imageUrl = imageFileName;
}
}
}
It does not work on Windows server 2008 on IIS 7.0 Is there some known WP Identity issues or any other kind of security issues in cross process memory sharing?
When using Animation extender intellicence is working when i am at this level asp:animationextender ..>,even after that <animation > and <profilebindings> is coming, but after that when wrighting any code intellicence is not coming.Is some settings requiredIf this the behaviour, how can i know the keywords that are used within <Animation> or <ProfileBinder> ?
View 1 RepliesSystem.Diagnostics.Process.Start not work with IIS, but on ASP.NET Development Server
View 3 RepliesIf i use signs like ë in the HTML Editor, in IE, its ok, and works. But if i use ë in firefox in the same page with the HTML Editor. If i press safe the ë is converted to: � (copy past doesnt work well, but its a square if you put [] to each other). But how is this possible? And how can i solve this problem? In IE its working well, but 50% of the users of the system i build are using Firefox. So it should work in all editors.
View 4 RepliesWhen running the ASP.NET Development Server, everything is working fine. However, when I deploy my asp.net application to the production server (IIS 7.0 integrated mode, fresh install), my location tags in my web.config file are being ignored.
Case in point: I'm using forms authentication, and when the user arrives at my login.aspx page, the external css & js files are not being loaded...even though I have specified that those files should be available to all users (auth'd or not). However, once the user is logged in, the files do in fact load.
<authentication mode="Forms">
<forms loginUrl="~/Account/Login.aspx" timeout="2880" />
</authentication>
<authorization>
<deny users="?" /> <!-- Restrict anonymouse user access -->
</authorization>
And the exception to my css file...
<location path="Styles/xtools.css">
<system.web>
<authorization>
<allow users="*"/>
</authorization>
</system.web>
</location>
I've verified that the path to the css file is accurate.
--EDIT Forgot to mention, I have tried creating a web.config file in the targetted folder as well...still not working.
I'm using an asp textbox and a search button. In Safari if I click the search button i get redirected to the search results page using javascript window.location.href. But strangely the same javascript will not redirect to the page if I press return in the textbox. Using the alert function I can see that window.location.href has the the correct url and the location bar at the top changes from the search page(default.aspx) to the search results url however when I click OK to the alert box the url at the top reverts back to the default.aspx page. It works on ie7/8/firefox/chrome but not safari. Here is my javascript,cs and aspx code:
function submitSearchOnEnter(e) {
var CodeForEnter = 13;
var codeEnteredByUser;
[code]...
I'm having one problem in mobile website using jquery.
i have written a code on button click to redirect using window.location='test.aspx' it doesn't work event my javascript validation is also not worked. how to explain if your in other country give error 406 forbidden access is deny.
I'm trying to create a .NET solution and add class libraries to it. First - in VS2008 I go to File > New > Project > Other Project Types > Visual Studio Solutions > Blank Solution. Then - after VS2008 creates the blank solution I right click on the solution and select Add > New Project > Visual C# > Class Library. However, when I add the Class Library to the solution, the solution icon disappears from Solution Explorer (although the solution name is still in the VS2008 title bar). Why does the solution icon disappear
from the Solution Explorer when I attempt to do this?
I am stumped by a serious issue in Vs 2008.
I created a Blank solution called HelloWorld.Then I added a new Class Library project by the name of HelloWorldService.After creation of the
Class Library project the Solution name disappeared from Solution Explorer.
As a result of which I can now only add new items into the Class Library project but cannot add new item to the solution.
This appears to be a pretty old problem as I found it in another link on the internet.
[URL]
It seems to be a bug.Has MS released a patch or a fix for this.
I implemented the Location tag in the web.config file to authorize the anonymous users for Images folder. I deployed the code in IIS6.0 with Forms authentication mode enabled for the virtual directory. I disabled all other authentication modes. When I browse the login page, Images are not displaying. When I set Anonymous authentication in IIS6.0 for the Image folder, it works fine.
See below the code implemented in web.config:
[Code]....
