So what I have is a bunch of dynamically created textboxs that when the user enters some data and either tabs out or clicks out some calculations are done. After the page posts back control focus is lost. What I need is to be able to set focus back to the control that was tabbed to or clicked into not the control that data was entered into.
View 1 RepliesI have controls on my page, is there any way I can get the tabIndex of active control or focused control?
View 1 RepliesWhat is the earliest time that a control can be focused on without causing an exception/server error? It seems that newly-created (in codebehind) controls cannot be focused on until they're added to the page (or another container on the page), but I'd like to confirm and make sure.
View 2 RepliesI am experiencing an issue with the TreeView control when loading new pages. It is databound to web.sitemap, but when loading a new page, it does not select the node of the current page, just resets it to the root. THe new page loads fine, just not preserving the current navigation in the tree view.
View 2 RepliesSo I currently have a aspx page that shows details for any single staff member, and the page is setup with mostly ASP labels. I have a subroutine called "getstaffdata" that populates the page on load (via subroutine).
I would like to convert this to a page that shows details on one staff member, or many staff members, one after another. So I thought of using the repeater control, but I'm not sure how to convert the page over. The staff userids are passed via query string, but I'm just confused on how to do the datasource for the repeater control.
My web application has user control which uses third party controls called Devexpress controls. The user control is a menu and is part of the Master page. It is placed there because this needs to be available in all the pages. My user controls raises a even on item clicked. Now, My question is that Is there any way to know that the event has occurred in page_load of the current page in which I am in?
View 3 RepliesI am looking for a way to figure out the current URL that the page is currently on (NOT what the asp.net page currently is, but where the CODE is at). ie. My web app is located at: [URL] my code is: String page = [URL]
String response = GetResponse(page); //basically the above code goes to the website [URL] and parses the HTML within it and brings it back and populates the variable string "response". But, sometimes the [URL] throws me a curve ball and redirects me to: [URL] I want to be able to use a try/catch to be able to "catch" the error of a different page: ie validateUser.aspx. So, I need to do to this: try
{
String page = [URL];
String response = GetResponse(page);
}
catch
{
//code to check the behind URL to see if [URL] is the URL OR IF [URL] is the current URL
}
understand I know how to find the URL of the current page the web app is on. I need to find the current page that threw the exception during the execution of the code behind.
I am building in error-logging into my site, and want to be able to get hold of the current page name that the error occurred in, as well as the specific subroutine or function, to then pass to a VB.NET function. Is there anyway to get hold of this information without hard-coding the names manually? For example,
Dim strCurrentPageName = ???
Dim strCurrentRoutine = ???
I need to get the focused element (label/textbox) on my page, what property used to use for it. I am working in C#
View 3 RepliesI have 5 textboxes and 1 button. I want when i fill 5 TextBoxes any informations , then i click that button , that button will be disabled . And then , if i focus to that 5 textboxes and fix informations again , that button is enabled .
- That mean i have to focus to that textboxes , so i program it like this :
if(textBox1.focus())
{
button1.Enable=true;
}
- But nothing happen , so how to solve this problem ??? .
- I searched Google , it tell me "using : this.Activecontrol is the way easiest and shortest" . So , How to i have to do ???
I want my textbox to expand, say, from height=20 to 40px when I clicked on the textbox or when it's focused. Below are my codes.
[Code]....
CSS code:
[Code]....
I also wanted to allow the user to manually drag/adjust the textbox's height as he/she desires.
How to center the menuitems and highlight the selected menuitem in menu control in asp.net?
<asp:Menu ID="maspageMenu" runat="server" BackColor="#2D2D30" Width="100%" DynamicHorizontalOffset="2" Font-Names="Verdana" Font-Size="1.4em" Font-Strikeout="True" Font-Underline="True" ForeColor="#009933" Orientation="Horizontal" StaticSubMenuIndent="10px" BorderStyle="Groove">
<DynamicHoverStyle BackColor="#18624F" ForeColor="White" />
<DynamicMenuItemStyle BackColor="White" HorizontalPadding="5px" VerticalPadding="2px" />
<DynamicMenuStyle BackColor="White" BorderStyle="Double" />
[CODE]...
I have a page with a gridview control that shows files that have been uploaded to our site. The name of the uploaded files, who uploaded them, and if they have been downloaded, etc are stored in a table. The gridview is bound to the table through a sqlDataSource control. I have a button column in the gridview that downloads the file associated with a row when the button is clicked. All that works well. I have a check box column that shows checked if a file has been downloaded. When the download button is pressed.
the file downloads and then a short routine is run to update the downloaded field in the uploaded files table to set the downloaded field to true. This is done through a command string. All this works. Here is the question. After the update is run I do a databind on the gridview to update it. The databind is run in the PageLoad event is the page is a postback. This does not cause the current row to show downloaded =true (checked). If I refresh the page in the browser then it displays correctly.
I have a devexpress gridview one of the column contains url. I need on url clik highlight this row and if user click another url in another row highlight and unselect previous.
View 1 RepliesI'm new in ajax toolkit and I used slideshowextender , but now I want to use another ajaxtoolkit to maxmize the photo or picture when focused how I can do by ajax toolkit
View 4 RepliesI am using gridview controll in asp.net. I dynamically kept text box in all cells and I set text box readonly property as true. I want to find out the focused text box id. I have to populate some dynamic valuese into selected text box.
View 3 RepliesPer different user mode, some pages should not be accessible by users unless they have a valid session key.In your opinions -- would it be better to have a list of acceptable pages in the master page, and check if the current page is valid for the current user? Or handle this on every child page?I'm thinking master page, just want to hear what your input would be.
View 2 Repliesi want to see my textbox value when i click on previous button in another page
then display my 1st page enter textbox value.
I'm new to ASP.net (and coding in general) and I was very impressed about how easy is to learn enough to create something useful :)
Unfortunately, now I'm stuck on a problem involving gridview sorting and paging: I created a master gridview bound to an sqldatasource, I enabled sorting and paging and then I linked it to a detailsview to enable editing and inserting.
In addition, I set up two other gridviews whose datasources depend on the master gridview.
When a user selects a row and modifies it in the detailsview, the sort takes place and the row is often moved to another page. This can be a little confusing, especially because there are other controls relying on the selected row of the master gridview.
There's a way to find and select the page of the selected row after gridview's databind and sort take place? I tried creating a dataview to search the index of the selected datakey in the databound event of my gridview, but it doesn't work, because it seems that the rows aren't sorted yet. Maybe I should choose another event?
I want to access controls (textbox and HTML hidden fields) from current page to do some transactions in my database.
View 3 RepliesI need to be able to programmatically determine the doctype of the current page (.aspx), whether its set directly within the page itself, or via a master page.The reason is so I can output correctly formatted html from custom controls or components based on whether the doctype is plain html, xhtml, xml
View 2 RepliesI have a master page which has several ContentPlaceHolders. Not all of them are used by the current content page all the time. During page rendering the master page needs to set a property when a ContentPlaceHolder wasn't used by the current content page. Meaning a ContentPlaceHolder might not be referenced by the content page.What's the best way for the master page to iterate through its ContentPlaceHolders and find out which ones haven't been used by the current content page? Looking for a solution that does not involve any communication from content page to master page.
View 2 Repliesi have four web pages like(home,aboutus,contactus,loginform) and 1 masterpageby using link button i am navigating 2 this pages... while navigating the total page is refreshing... i dont want like thtonly content place holder should change.... without refreshing the page....
View 7 RepliesI need to store click to my website to a database, I have a sql2005 table :ID, CLICk, PAGETITLE, DATE.
i insert the click and date but i cant get the page title.
The code that inserts data is in masterpage.master.
i need to finde the current page where the clickocured than take the title
everytime the user selects a date from my datepicker the for some reason instead of staying focused on the are the date picker is in it scrolls to the top of the page.
Heres the function located at the bottom of my asp.net page under the
<script>
$(function() {
$( "#<%= pissued1.ClientID %>" ).datepicker();
});
</script>
This is the code.
<td align="left" colspan="2">
<strong>
<asp:Label ID="labdi1" runat="server" Text="*Date Issued:"></asp:Label>
<asp:RequiredFieldValidator ID="p1divalidate" runat="server" ControlToValidate="pissued1"
ErrorMessage="You Forgot The">*</asp:RequiredFieldValidator><br />
</strong>
<asp:TextBox ID="pissued1" runat="server" Width="45%"></asp:TextBox>
</td>
and also on postback my datepickers stop working. For example i have a dropdownlist that causes postback and if the user uses the drop downlist then the datepickers stop working