C# - Change Rendering Order Of Controls?
Mar 2, 2010
I found this article on how to manipulate the rendering sequence of asp.net controls.: [URL]I placed some placeholders on the page to encapsulate the controls i want to move around. The problem is, that RenderChildren does render the controls without the html i placed into the placeholder like this:
<asp:PlaceHolder id="phOneToMove" Runat="server" Visible="true">
<tr>
<td><asp:Literal id="label1" Runat="server">Caption</asp:Literal></td>
<td>
<asp:TextBox ID="textbox1" runat="server"></asp:TextBox>
</td>
<td>
<asp:RequiredFieldValidator ID="validator1" Enabled="true" ControlToValidate="textbox1" runat="server" EnableClientScript="False" ErrorMessage="error"></asp:RequiredFieldValidator>
</td>
</tr>
</asp:PlaceHolder>
The controls are rendered without the tr and td around.How can I handle this? All I want is to change the order of the placeholders like in this example phOneToMove.
View 2 Replies
Similar Messages:
Feb 7, 2011
The AjaxToolkit has a ReorderList. I'm searching for a jQuery solution that does the same and found this page. I would like to change the order of divs (vertically) and upload the new order to the database (ajax).
View 2 Replies
Oct 8, 2013
how to change order of grid view column,after binding it through database in asp.net web application
View 1 Replies
Aug 6, 2010
I have the follow grid
<asp:GridView ID="dgParticipante" runat="server" AllowPaging="True"
View 4 Replies
Jan 6, 2010
How can I change gridview templatecolumn order dynamically?
View 4 Replies
Dec 15, 2010
How to change GridView columns order or index during runtime.
View 2 Replies
Apr 13, 2010
I have seen the MVC source code,and I found that the source register the Areas like this:
foreach (Type areaRegistrationType in areaRegistrationTypes)
{
AreaRegistration registration = (AreaRegistration)Activator.CreateInstance(areaRegistrationType);
registration.CreateContextAndRegister(routes, state);
}
so... how can I change the order without change the source code?
View 2 Replies
Oct 22, 2010
I have two table Order and Order Detail.
What i need is i need to bind last 10 Order in Gridview/details view with paging, and the same order detail also fetch from database and shown in another gridview.. if user click any oderNo in first Gridview/DetailView then i need to show Respective order detail in anther gridview..
without postback coz we already fetch 10 order with orderdetails from the database..and if user click next 10 orderNo using paging then again we need to load 10 orderNo with respective orderdeatils from database like this going on....as well as let me know how to take print of particular oder and order detail....?
View 7 Replies
Jun 17, 2010
I am buiding web application about news.My problem i need to change order of articles in that category.
Example :
+ Article A ----> position 1
+ Article B ----> position 2
+ Article C ----> position 3
+ Article D ----> position 4
+ Article E ----> position 5
+ Article F ----> position 6
All articles A -> F are inside category. Sometime i want to Article E is position 1, or article C in position 6 ...and so on Now i can't imagine what i have to do ?
View 9 Replies
Sep 20, 2010
I have a detail section in report. I am perfectly able to retrieve all the data from the Sharepoint List into datatable and bind it, to generate reports inside the details section.All the columns and related row data are getting displayed as reports in to the detail section.But, my issue is, I want to change the row data for a particular column before rendering on to the report.for instace, if column named Product has some values, I would like to display these values with different string name based on a switch condition. How do I achieve this?
View 1 Replies
Oct 19, 2010
can change the order in dropdownlist
DateTime NextMont = month.AddMonths(i);
View 3 Replies
Dec 15, 2010
I've a webpage, which has a panel which contains three panels. What I would like to know, if there is a way to change the panel order..
[Code]....
And depending on some server variable reorder the panels.. And also, let the user drag and drop the panel in the desired position
View 2 Replies
Feb 10, 2010
I have 2 tables with a relationship by EmployeeID (Employee, Cases)
The relationship name is Purchases (ie employee->Purchases), and iterating through it gives each row in order by date (entry order perhaps?).
There could be thousands of rows, so I want to present this collection in reverse date order.
Would I have to define a provider or repository to call instead of just Employee->Purchases?
View 5 Replies
Jan 18, 2010
I have an ASP.NET website application, and there is a home page for my web site. I need to be able to change the default document of my website programmatically (C#) so that I can make another web page take priority above the one that already exists. I would then like to revert back to the previous default document order.
Example :
I have two home pages - Home1.aspx and Home2.aspx. In the IIS default document settings I have added the two pages and made Home1.aspx be the first default document then Home2.aspx the second. I need in some cases to be able to change the order of the two default documents so that Home2.aspx is the first default document then Home1.aspx the second.
How can I do that from my C# code?
View 3 Replies
Jun 18, 2010
VB, .net 4.0, VS 2010. All of the sudden all of my button controls aren't rendering properly. They are in places on the form that make no sense. If I change the button control to any other control name such as an image button, they format corrrectly.
View 2 Replies
Jan 5, 2010
I'm trying to use images representing arrows to allow the user to change the order in which items appear in a list in a grid view in ASP.NET.
I have a class which has a value named "position", the class is displayed inside the GridView and is ordered by position. In each of the rows of the gridview are an up and down arrow which i want to change the value of "position" for the object represent by the row of the gridview. Whats the easiest way to do this?
[Code]....
View 2 Replies
May 13, 2010
I have a list box with 2 buttons (up and down) to determine the sort order. To move the items in the list box up or down I am using Javascript. I have a save button which is used to save the new order. However, I have an issue, in that when I have rearranged the order and press save, the order from the code behind is the same as the original order. My list box is:
<asp:ListBox ID="lstSortOrder" CssClass="uiControl" Height="200px" Width="700px" runat="server"></asp:ListBox>
My code behind to save the new sort order is:
[Code]....
What so I need to do to capture the new listbox order?
View 1 Replies
Feb 16, 2012
Here's my gridview when it comes it it's sorts on Age. Sorting is available for all columns/headers. How do I make the sort order to change on the ddsrpt sort to desc order when it's clicked?
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False"
DataSourceID="SqlDataSource7" EnableModelValidation="True" Width="789px"
CaptionAlign="Top" Height="126px" BackColor="White" BorderColor="#DCBE68"
BorderStyle="Solid" BorderWidth="1px" CellPadding="4"
HorizontalAlign="Center" CellSpacing="2" Font-Names="Arial"
AllowSorting="True" EmptyDataText="No Records" DataKeyNames="FO,CLMSSN">
[Code] ....
I got this error message - Gridviewsortdirection is not declared
View 1 Replies
Jan 23, 2010
I have 5 hard corded texboxes in a page in a sequence with sequence Number . Now i want to add re-order /re-arraning functionaly .. but i can't use ajax reorder list because i have 5 hard corded texbox. how can i maintain the order in Insert/Update cases. And also suggest me control that i can use, another than ajax re-order list. coz i not using any list items i have hard corded items on the page.
View 1 Replies
Apr 24, 2010
From my testing, it appears that the order of parameters for the UpdateParameters must match both the order of the bound fields on the form (asp:Formview), and the order of the parameters in the UpdateCommand. Is that correct? If so, why do the parameters have names if all that matters is the order? I tried both asp:ControlParameter and asp:Parameter. Maybe the more relevant question is why aren't the names used instead of the order, particularly for the form order?
So, given I display the Identity field (CID), and need that for the update, I cannot get the update to work without including it in the UpdateCommand. Of course, since it is an autonumber field in Access, I cannot actually set it. So, I had to add another field to the db (lngUpdateCID) that I could set. That can't be how it has to be done, but I could not figure out another way to do this.
The relevant code is below:
[Code]....
View 23 Replies
Mar 10, 2011
I find it hard when using asp.net controls, to make proper css files because I don't know what the html output for the different controls end up as. For example, if I want to add a div tag using a asp.net control, it's not easy to know what kind of control I can use.
Are there any documentation that shows for each asp.net control, what the rendered html for that control will be? I understand that some controls will probably change it's output due to how it's configured, but most controls will at least follow a pattern here.
The best would of course be a service on the web where you can put in the asp.net control definition and get the rendered html out. Currently I have to put a control into my webform, run it and check the source in the browser, and if it's not the correct html tag, try another control and repeat. That get's tedious quite fast.
View 2 Replies
Nov 11, 2010
I am creatin a server control where some controls are being rendered inside `protected override void Render(HtmlTextWriter writer)`
writer.AddAttribute(HtmlTextWriterAttribute.Type, "button");
writer.AddAttribute(HtmlTextWriterAttribute.Id, this.UniqueID + "butto_Foo1");
writer.AddAttribute(HtmlTextWriterAttribute.Value, "Button1");
writer.RenderBeginTag(HtmlTextWriterTag.Input);
writer.RenderEndTag(); //button
writer.AddAttribute(HtmlTextWriterAttribute.Type, "button");
writer.AddAttribute(HtmlTextWriterAttribute.Id, this.UniqueID + "butto_Foo2");
writer.AddAttribute(HtmlTextWriterAttribute.Value, "Button2");
writer.RenderBeginTag(HtmlTextWriterTag.Input);
writer.RenderEndTag(); //button
This way buttons are rendered on design view as well. The problem is that number of buttons to render is dynamic based on data in xml file (even if the data was static, the number of button is about 12 and I don't think it is wise to copy paste the same code above 6 times...). I thought by using loop for that:
int i = 1;
foreach (Button button in tb.Items)
{
writer.AddAttribute(HtmlTextWriterAttribute.Type, "button");
writer.AddAttribute(HtmlTextWriterAttribute.Id, this.UniqueID + "butto_Foo" + i);
writer.AddAttribute(HtmlTextWriterAttribute.Value, button.ButtonValue);
writer.RenderBeginTag(HtmlTextWriterTag.Input);
writer.RenderEndTag(); //button
i++;
}
tb is defined in OnLoad; On run time it works, but on design time I get error: > Error rendering control. And control is not being rendered.
View 1 Replies
Mar 7, 2011
I have been trying to implement an extended GridView that eventually will include a panel with a number of filter options outside of the grid iteself.
As a test I have added a dropdownlist and a linkbutton but when these are rendered to the page they are rendered as plain HTML with none of the javascript or ids that are generated for server controls as a consequence the postback event is not fired when a dropdownlist item changes and the linkbutton is rendered as plain text.
[Code]....
View 2 Replies
Jan 11, 2011
I have a form with some textbox and buttons. Now by default, tab order is going as per the sequence of controls on my page. But I want it to in some different manner. Also Tabindex property does not behave in desired manner
Note: There are 4 tables within main table. the order which should go is: First in table 1, then table 3, then table 2, then table 4 The manner I want is:
txtExamName
txtExamDescription
btnExamAdd
btnExamClear
btnEditExam
btnDeleteExam
txtProgramName
txtProgramDescription
btnAddProgram
btnProgramClear
btnEditProgram
btnDeleteProgram
Here is my code:
<%@ Page Language="C#" MasterPageFile="~/Views/Shared/Site.Master" AutoEventWireup="true"
Inherits="System.Web.Mvc.ViewPage<ReachOps.ApplicationServices.ExamDTO>" Title="Exam Type Program Type" %>
<%@ Import Namespace="ReachOps.ApplicationServices.ViewModels" %>
<asp:Content ID="Content2" ContentPlaceHolderID="MainContentPlaceHolder" runat="server">
<link href="<%= ResolveUrl("~") %>scripts/Grid/mvcGrid_blue.css" rel="stylesheet"
type="text/css" />
<link href="../../scripts/DialogControl/subModal.css" rel="stylesheet" type="text/css" />
<link href="<%= ResolveUrl("~") %>scripts/Grid/mvcGrid_grey.css" rel="stylesheet"
type="text/css" />
<link href="<%= ResolveUrl("~") %>Content/ReachStyle.css" rel="stylesheet" type="text/css" />
<link href="<%= ResolveUrl("~") %>scripts/ContextMenu/skins/cm_default/style.css"
rel="stylesheet" type="text/css" />
<link href="../../scripts/DialogControl/subModal.css" rel="stylesheet" type="text/css" />
<link href="../../scripts/ETPT/AddEtpt.css" rel="stylesheet" type="text/css" />
<meta http-equiv="content-type" content="text/html; charset=utf-8">
<meta http-equiv="imagetoolbar" content="no">
<meta http-equiv="X-UA-Compatible" content="IE=EmulateIE7" />
<script src="../../scripts/DialogControl/subModal.js" type="text/javascript"></script>
<link href="../../Scripts/DialogControl/subModal.css" rel="stylesheet" type="text/css" />
<script language="javascript" src="../../scripts/ETPT/ETPT.js" type="text/javascript"></script>
<script src="../../scripts/jquery.getUrlParam.js" type="text/javascript"></script>
<script src="../../scripts/Grid/grid.js" type="text/javascript"></script>
<script src="../../scripts/Utilities.js" type="text/javascript"></script>
<%--Hitesh Gupta
Mantis ID :-12908, Date:-06/01/2011--%>
<script src="../../Scripts/jquery.alerts.js" type="text/javascript"></script>
<link href="../../Scripts/jquery.alerts.css" rel="stylesheet" type="text/css" />
<%--Mantis ID :12908 Ends--%>
<div id="MainPage" class="MainDiv">
<table class="MainTable">
<tr>
<td colspan="6" class="BlankRow">
</td>
</tr>
<tr>
<td class=" Active " onclick="javascript:window.location.href('AddETPT');">
<a class="TAb_a " href="/ExamTypeProgramType/AddETPT">Add Exam/Program Type</a>
</td>
<td style="width:5px;"></td>
<td class="Inactive " onclick="javascript:window.location.href('ETPTAssociation');">
<a class="TAb_a " href="/ExamTypeProgramType/ETPTAssociation">Exam/Program Type Association</a>
</td>
<td style="width:5px;"></td>
<td class="Inactive " onclick="javascript:window.location.href('ProductList');">
<a class="TAb_a " href="/ExamTypeProgramType/ProductList">Product List <span id="spnProductCount">
</span></a>
</td>
<td class="Blank">
</td>
</tr>
<tr>
<td colspan="6" style="width: 935px; background-color: White;">
<table class="outerTable">
<tr>
<td colspan="5" style="height: 10px;">
</td>
</tr>
<tr>
<td style="width: 20px;">
</td>
<td class="TopTitle" colspan="3">
<img src="../../Scripts/UCD Design/Icon_Information.gif" alt="" style="vertical-align:bottom;" />
<span style="vertical-align:middle;">
Add or edit exam types (ET) or program types (PT) in the page below:</span>
</td>
<td style="width: 20px;">
</td>
</tr>
<tr>
<td style="width: 20px;">
</td>
<td>
<table class="LeftTable">
<tr>
<td colspan="2">
<div class="TitleDiv">
Add Exam Type
</div>
</td>
</tr>
<tr>
<td style="width: 100px; height: 15px;">
</td>
<td style="width: 315px; height: 15px;">
</td>
</tr>
<tr>
<td style="color: #990000; width: 100px;">
*<span style="color: #434343; font-weight: bold;"> Exam Type </span>
</td>
<td class="RightTd">
<input id="txtExamType" type="text" />
</td>
</tr>
<tr>
<td style="width: 100px; height: 15px;">
</td>
<td style="width: 315px; height: 15px;">
</td>
</tr>
<tr>
<td style="color: #990000; width: 100px; vertical-align: top;">
*<span style="color: #434343; font-weight: bold;"> Description</span>
</td>
<td class="RightTd">
<textarea id="txtExamDescription" rows="3" cols="30" >
View 1 Replies
Feb 26, 2010
You create a Web Form. You need to add controls that use adaptive rendering to display content. The type of content rendered must depend on the device that is requesting the page.
[code].....
View 24 Replies