I am getting this error after uploading my web app to my Rackspace box.
CS0246: The type or namespace name 'User' could not be found (are you missing a using directive or an assembly reference?)
It's odd because it works fine on my local computer where I do development. The actual line of code is:
public User user = new User();
I am using C#.
I had a code that creates a snapshoot of website and store the snapshoot in a specified folder.When I deployed the app into production server, it creates the image but it does not appear or stored in the specified folder, how I can fix this proble, I wan the snapshoot to be stored in the specified folder when hte app is on the production server .
Code Used to make a snapshoot is attached:
[URL]
My application running locally on my PC - on the Visual Studio Server (Cassini Server).My SQl Server DB is hsosted in a server on the internet.I think there are some configurations to be done in the SSMS ( Enable Remote conn.).
View 1 RepliesI have a menu that uses a sitemap. The menu works locally, but not on the server. Below is my code for the menu, data source, and the sitemap. why I can run it locally and use the menu, but I cannot use the menu on the server?
[Code]....
When I deploy my web service, I get the following error:
There is no build provider registered for the extension '.svc'. You can register one in the <compilation><buildProviders> section in machine.config or web.config. Make sure is has a BuildProviderAppliesToAttribute attribute which includes the value 'Web' or 'All'.
I found one thread ([URL] that a solution but, I can not get it to work. If I make the changes to my web config file as in the thread, I then get a configuration error. One odd thing is that, if I check the machine.config file on my machine, located at C:WINDOWSMicrosoft.NETFrameworkv2.0.50727CONFIGmachine.config, I don't see any of the config settings described in the thread. As a matter of fact, there is no mention of "compilation" or "buildProviders" at all.
Here is my entire config file listing:
[Code]....
I have a new MVC3 project with one Controller called PublicController.cs which contains 4 identical methods for testing out how routing works. The only difference between them is their name, and that they each point to a different view ...
public class PublicController : Controller
{
//
// GET: /Public/
public ActionResult Index()[code]....
My web-server is shared hosting with netcetera, using a sub-domain for this deployment (previously had problems with MVC in virtual directories, but have full blown MVC2 apps running in sub-domains no problem). I've deployed by using the "Publish to file system" option, then copying over the files aswell as just copying the entire source project over. Both give identical results.
I have a button on a page that when clicked should bring up the users email system (MS Outlook).When I run my application locally on my test machine, I click the button and my email comes up.However, once I moved the application to the web server, when I click the button, nothing happens.Can you tell me what is wrong? Below is the function I am using:
[Code]....
I created a WSDL with Visual Studio 2005 and tested it using localhost. It worked exactly as anticipated and returned the expected results. I basically called the WSDL from a classic ASP page using Server.CreateObject("MSXML2.ServerXMLHTTP.3.0") and all went well. The url was http://localhost/service.asmx/methodname.
I deployed the WSDL to the remote server and tried to access it the same way; I changed localhost with the domain name as http://domainname/service.asmx/methodname. But now I get 'Post to http://domainname/service.asmx/methodname failed with 500.
I have developped an asmx webservice with visual studio and I deploy on IIS 7 which has 3.5 Framework by copying all the files.
When testing it says
Could not load file or 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
I don't use [System.Web.Script.Services.ScriptService] so I don't understand why it tries to load System.Web.Extensions.
Note: I'm not using any other assembly/lib I'm just learning webservice so it's very simple: I create a webservice Test.asmx with one method which uses one class Test.cs within same namespace WebServiceTest. This works locally.
Let's say that I have my ASP.NET web application in a directory called "MyApp" both locally and on a remote server. I'm trying to build an onclick response to a link. The response calls a Javascript function, passing it the URL of an .aspx page in my web app. The Javascript pops out a new window displaying the page. My C# code looks like this:
link = new HyperLink();
link.Text = product_num_str;
link.NavigateUrl = "#";[code]....
I started using the Request's Authority property because I was having problems running locally on the Visual Studio web server when I used the Host property. The problem was that Host only returned "localhost" instead of the host and port number. When tested locally, the code works because the "authority" maps to my app root folder. The URL generated is, e.g.,
http://localhost:52071/ProductInfo.aspx?_num=123
If I run on a remote server, however, I end up with something like: http://company-server/ProductInfo.aspx?_num=123
This fails to find the page, because in this case the "MyApp" root folder must be included.There is probably an easier way - putting an entry in the web.config or something. My motivation originally was to allow the app to be published to a folder of any name and work as is. I could hack my approach and search the string for "localhost" or something, but that's ugly. So how do I build a string that will work everywhere?
I have a page which uploads a file from server A to server B. The user first uploads the file to server A, where it's saved into a diretory, then once the file is safely stored there, I'm transferring it to a second server, server B, using the following code:
[code]....
So, in summary, the only difference I can see between the working case and the non-working case is the server that'ssending the file.
This is very strange behaviour from my login control - locally it works fine - But deployed to the web server (With an external hosting company) it gives a windows prompt, even though the authorisation is set to "Forms".Here is my web.config file:
[Code]....
The error is mentioned below, the cssfriendly.dll is in bin, and browser file is in there app_browsers folder. And it is working in same PC (developping PC), on remote server that belong to my company (i just installed .net 3.5 on that server)
I tried uploading the same site on 2 dufferents hosting, and finally i got the same error. What could gone wrong ? I tried contacting the hosting support but they work in ticketing system and this is extremely slow.
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load type 'CSSFriendly.MenuAdapter'.
Source Error:
[Code]....
I have the following problem, I make a web site when I run this website (locally) I get the correct data (for example I have a set of cities according to the city selection, I get the required data), but when I publish the web site and try it on line (I get incorrect data under the same conditions I tried before locally). I don't know what is the problem, I need to trace the code online (debug the code on line) to know where the problem. Is there any suggestions how to treat case like this, code works in correct manner locally but fails sometimes online? I use (https) online. I use static variable (supposed not to be changed) but online the value of this variable is changing and make this problem.
View 3 RepliesWhen a user opens the my web app then immediately opens clicks on a button to open another, related page (page opens in a separate window (users choice) via a button), the new page opens fine. If a user open the my web app and waits a bit (usually abouta minute) before clickin on the button to open another page, they get the 'Page Not Found' error. When I run this app locally (local host), I have no problems.the server can handle, why does this happen only after the user waits to open the other page.
<httpRuntime maxRequestLength="2097151" executionTimeout="3600" useFullyQualifiedRedirectUrl="true"/>
<sessionState mode="InProc" timeout="480" />
I have an ASMX Web Service that has its code entirely in a code-behind file, so that the entire contents of the .asmx file is:
<%@ WebService Language="C#" CodeBehind="~/App_Code/AddressValidation.cs" Class="AddressValidation" %>
On my test machine (Windows XP with IIS 5), I set up a virtual directory just for this ASP.NET 2.0 solution and everything works great. All my code is separated nicely and it just works.However, when we deployed this solution to our Windows Server 2003 development environment, we noticed that the code only compiled when all of the code was dropped directly into the .asmx file, meaning that the solution didn't work with code-behind. We can't figure out why this is happening.
One thing that's different about our setup in our development environment is that instead of creating a separate virual directory just for this solution, we dropped it into an existing directory that runs a classic ASP application. So here we have a folder with an ASP.NET 2.0 application within a directory that contains a classic ASP application. Granted, everything in the ASP.NET 2.0 application works if all of the code is within the .asmx file and not in code-behind, but we'd really like to know why it's not recognizing the code-behind files and compiling it correctly.
So here's the code in C# .Net.
string linie = txtFirstName.Text + "," + txtLastName.Text + "," + txtBirthday.Text + "," + txtEmail.Text + ",";
StreamWriter write = new StreamWriter(@"D:/Hosting/2691577/html/gshccadmin/site1/excel_formdata/birthday_club.csv", true);
write.WriteLine(linie);
write.Flush();
write.Close();`
Anyone know why this code behind function works in Firefox but not IE.
I have a web Application and have created a seperate class library project.I am trying to use the Class Library by referencing it in the Web Application. I am doing this by right clicking the web application and clicking 'Add Reference...'. I then browse to my Class library and click ok. This gets added to a Bin folder in my web application.The problem is I can't actually get any of the objects that are in the Clas Library. I have tried adding a using statement to the top of the page. It tells me that the object could not be found (are you missing a using directive or an assembly reference?)Can anyone tell me what I'm doing wrong?
View 3 RepliesI am putting the setting under the property of one of my C# Class Library project for app setting:
EUCAccountService_ConnectionString
EUCTelcoDB_ConnectionString
In the development, it works nicely. Until I deported to production, I realise that the component that use those thing .. it just hang. I found that under BIN when it compiled dewaCorp.EUC.TelcoDB.Data.dll.config and open up that file and turn out nothing.
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
</configuration>
How to make this works? I thought by compiling it, it turned to some sort config file or something. But it didn't.
I just tested a new aspx-website and in the debug mode it works fine.
But when I publish it on the server 2003 with IIS6 then it works first and after several requests I get an error message page not found.
The page itself exists and I think that it is only unavailable on the server.
I am not sure if this is a problem with visual studio, but I had some class files that I deleted, but I can still call them in my code. Also I can call a .edmx i created, but I cant see it in my folder, i tried rebuilding my solution, cleaning it, rerunning it, checking source files. Its also causing a lot of my classes to have this error:Missing partial modifier on declaration of type 'MatchGaming.Models.MyProfile'; another partial declaration of this type exists I already tried adding partial and it i just get a bunch of errors everywhere else saying that a lot of my variables already contain a definition, almost like theres a duplicate class stuck in the cache or something.
View 1 RepliesI have added an assembly(GAC DLL) in my web.config, but if someone does not installed my assembly, the web page can still work without error or successfully running in visual studio debugger?
View 6 Replieshave a website. If I run it locally it works. I also published it on server and if I navigate to http://www.mydomain.com, everything works.Then I wanted to set up staging site on real server for testing purposes. So in IIS under the node of that site I added "Application" with url http://www.mydomain.com/testapp.f I put the same code inside I receive that exception that resource is no accessible.
View 1 RepliesI have a windows service that calls a class library. The call to the Class library from the windows form application works fine. But from the service I do get the desired output. The event viewer does not report any error. The service was working fine until the recently when the server got remastered. Any suggestions what might have gone wrong?
View 2 RepliesI've made an interface called ApprovalEvent in a separate file with the namespace myproject... I've also made a class called PurchaseOrder... it's also in the same namespace, just in a separate file. Whenever I try to make PurchaseOrder implement ApprovalEvent it always says that ApprovalEvent is undefined...
How can I make the class recognize that the interface exists but is in a different file?
Here's some code:
[Code]....