C# - Read HTTP Body And Put It Into Variables?

Mar 9, 2010

how do you create a class to read the html body and phase it into a variable?

Example:

the page [URL] display the following plaintext within the html body content item1=xyz&item2=abc&item3=jkl

how do you read content of the html body and assign them to a variables

in this case

variable1=xyz (value taken from item1=)
variable2=abc (value taken from item2=)
variable3=jkl (value taken from item3=)

View 2 Replies


Similar Messages:

C# - Can Get The Message/response Body In WCF When Server Returns An HTTP 401

Jan 12, 2010

I have a WCF client test harness where I'm using a "client message inspector" endpoint behavior to "pick off" raw requests and response messages going to and from a service and save them for later display in the UI.

This works great, except for the use case where invalid credentials are passed (Basic Authentication). The server returns an HTTP 401 along with a SOAP fault in the body containing details of what happened. I have no control over the service, so this behavior cannot be changed.

Because the HTTP 401 is returned as a WebException, my message inspector never fires and I can't get to the raw response. This exception eventually gets to the UI in the form a MessageSecurityException.

Is there any way to suppress this so the message inspector's AfterReceiveReply still fires? or is there somewhere else I can access the entire raw response?

View 1 Replies

Add A Read More Button That Shows The Body Of An Article When Clicked

Apr 4, 2011

I have been searching the INTERNET for a solution to this problem with no luck. I am using a repeater to show the particulars of a document, and would like to add a read more button to the repeater that will show the body of the document when clicked. I am also open to suggestions that doesn't involve a repeater. Here is a screen shot to show what I am trying to do... So when working correctly the area that is boarders would only show when a link or button is clicked.

View 12 Replies

Sharing Session Variables From Http And Https Versio?

Mar 22, 2010

I am trying to fix an ASP.NET site that a friend had botched converting from older technologies. To the user, the site appears to have public and secured sections. Behind the scenes, the public and private sites are separate web applications with separate app pools. The difficulty arises because it appears that the applications share the same session IDs (when going from the public to the secured pages, the session ID remains the same), yet none of the (InProc) session variables are getting passed from the public site to the private one. Basically, the workflow consists of the user checking a checkbox ("I agree" type of stuff) on the public site (let's call that page http://www.boring.gov/iAgree.aspx), then logging in on the secured site (let's call that page https://www.boring.gov/login.aspx). The commandments from the parent agency in DC are that the user may not bookmark the login page, the user has to click "I agree" every time they log in, and that the "I agree" stuff has to be on a separate page. What am I missing? How would you do it? Notes:dows 2003 server.2 - Yes, it is a government agency.3 - I would have done things very differently if I was doing the conversion, but I wasn't brought in until the poop hit the fan, and it is too late to redo things.4 - Two previous SO threads that appear to be related, yet don't apply are this and that

View 4 Replies

State Management :: Session Variables Persist Between HTTP And HTTPS?

Feb 10, 2010

Just wondering whether or not Session Variables that are declared and set while in a HTTP session will continue to exist if the users session moves to HTTPS?

View 4 Replies

Read Environment Variables In Web.config?

Feb 18, 2010

Is there a way write code in web.config file using preprocessed function. Say I created environment variables like %Temp%, %WINDIR%. order to read these I can use the configurationManager class. But I dont want to use it. I woudl like to use a preprocessed function similar to timeStampPattern="{timestamp(local)}". Here timestamp(local) retrieves the value directly. So in a similar way can i read the environment variables %temp% and %windir% using preprocessed function if any exists?

View 2 Replies

Programmatically Read/Write Java Runtime Environment Variables Using C#?

May 28, 2010

I am developing one applicaion in ASP.net, C# and JAVA applet.

After Java installation I want to enter Java runtime parameter through C# code.

How can i resolve this issue?

View 5 Replies

Read A HTTP Post Request With Some Data

Nov 9, 2010

I am using an Zencoder API to transcode video files. Once the job is completed they will do a HTTP POST with XML or JSON data containing the Job ID and other info to the url we provide.

So if URL is www.abc.com/GetZencoderResponse.aspx or .ashx, how can I read the data they post?

excuse me for the underlines, i thought that would make my query stand out.

View 6 Replies

C# - Adding A Http-Header In A HttpModule And Read It Out From A Page

Oct 6, 2010

I've tried to write my own HttpModule (IHttpModule) that adds a Header like that:

public class MyModule: IHttpModule
{
public void Init(HttpApplication c)
{
c.BeginRequest += delegate{c.Response.AddHeader("MyHeader", "MyValue");};
}
public void Dispose(){}
}

and tried to read in a aspx page like that:

var x = Request.ServerVariables["MyHeader"];

View 1 Replies

HttpHandlers / Modules :: How To Read The Custom Http Header

Jul 23, 2010

I have a very simple query. I have added custom header to my website. Now I want to read the custom header. I am using IIS 6.0 on windows XP. I have already tried using using the Request.ServerVariables and and Request.header method. But none of them give me the custom header added to website.

View 2 Replies

WCF / ASMX :: Read Http Custom Header From Web Service?

Oct 5, 2010

cant read http custome header "MSISDN" from my web service ... same code works on regular asp.net page. Can anyone shade a light on that subject ?

View 2 Replies

C# - Invalidating The HTTP Cache On Read Only Front Servers?

Mar 24, 2010

We have a CMS system and in the production mode a number of servers only have read-only access to the content (with a few exceptions) and the editors for the site work on the content on servers behind it (which are not available to the public).

We're caching the content quite a long time on the front servers, but sometimes we want the content the editors publish to be available for visitors instantly. What is best practice for invalidating the cache in those cases?

View 2 Replies

Outputstream - Can Get Read Access To The HTTP Output Stream In Web Application

Feb 22, 2010

I would like to read all content that's been written to the output stream. I'm attempting to do this using an HTTP module, and it seems like the obvious timing would be when handling the PreSendRequestContent event.

However, if the output stream seems to be set to write-only, as I can't read using a StreamReader. Is there a way I read and re-write the content without writing my own IIS module?

View 1 Replies

Javascript - Content Page - Run A Script On "body" With "body Onload=myfunc()"?

Jun 8, 2010

i've added to the master page my script "myscript.js". Then, in a content page, i would like to load myscript() at startup (body onload).

View 4 Replies

Web Forms :: Send Net.mail Body As Web.mail Body?

Mar 30, 2010

In asp i tryed to send mail with images. so i used AlternateViews and LinkedResources from System.net.mail class. before sending the mail i would like to add email.Fields.Add [URL] here System.net.mail class doesn't contain Fields. System.web.mail only have Fields.

View 2 Replies

Collect 2 Variables From One Hyperlink, And Use Those Variables In The Page_load To Set As Session?

Aug 8, 2010

i am trying to collect 2 variables from one hyperlink, and use those variables in the page_load to set as session. but i don't know how to collect those 2 variables

such :

<a href="javascript:;" onclick="wsChangeColor('mainData', '#FF0000','#FFE4E1');return false;" title="Change color" id="red">1</a>

i would like to collect '#FF0000','#FFE4E1' or direct set '#FF0000','#FFE4E1' to string then send to pageload, how can i do this by only clicking on it ?

View 1 Replies

Web Forms :: Storing Javascript Variables Into C# Variables

Jan 2, 2010

I have this code in javascript: var x = e.mapX; It gets the X-coordinate of a map. What I want to do is that I want to store this into a c# variable. I have a class named Test with an integer property X. I want to store var x into X. In the codebehind, I have this on the Page_Load: Test test = new Test(); Then I am trying this on the javascript code: var x = e.mapX;

View 16 Replies

C# - How To Simulate Http Request Using WatiN With Specific HTTP Referrer And Query String

Dec 6, 2010

When I use WatiN to go to a specific web page, how can I fake the HTTP referrer with a query string (i.e. request is from google search with query string q=search_term)? So I can verify that the response header has the 301 redirect for specific referrer URL.

View 2 Replies

HttpHandlers / Modules :: Redirect A Page From Http To Https Using Http Module Begin Request Handler?

Jul 15, 2010

i redirect a page from http to https using http module begin request handler .i am calling webservice using ajax but it is saying webserice not defined .which otherwise works fineits work fine when rediect page in page_load instead .but i need to add function for https to http in every page. i still not know why ajax is not working when i use http module for redirect

View 3 Replies

Web Forms :: Redirecting To A Page At Server / Error Is Http 500 Or Http 403

Dec 2, 2010

I am having problem redirecting error when error is http 500 or http 403 locally running this site there is no problem it gets redirected to my errorpage.aspx. But when deployed at server, it does not get .tried putting try and catch in page_load and in global.asax and I have set Application_Error to redirect to that page and also set <customErrors defaultRedirect to that page also

error
statusCode="500"
redirect="/errors/errorpage.aspx?error=500"
/>

View 9 Replies

Working With Static Variables / Store The User Specific Information In Static Variables?

Mar 5, 2011

whats the exact use of static variables in overall programming in .net and for asp.net...

Recently i went for the interview where interviewer asked me 2 question which i was not sure for the same..

whats the use of session object, i said sessions are the server side object, they are used when you want to store user specific data at server side, then he asked what if i want to use static variables for the same, i was mum, can anyone tell me how asp.net will behave if i store the user specific information in static variables.If i use cookies which are the best option to store the data at client side (not sensitive one), but what if user has disabled cookies on his machine, will my application would crash.

View 3 Replies

MVC :: RedirectResult Does A HTTP Get. Want The Function That Does Http Post?

Apr 14, 2010

RedirectResult is doing a HTTP Get. I want a redirect that does a Http POST

View 2 Replies

Web Forms :: How To Redirect The Site To Http://example.net To Http://www.example.net

Aug 3, 2010

I am facing problem in to redirect my site from http://example.net to http://www.example.net

When the user can enter the site name in address bar like http://example.net how can i automatically redirected to http://www.example.net

I am trying to change the properties in iis but it doesnot work.

how can i acheive this

View 3 Replies

How To Pass Through Http Call With HTTP Handler

Jan 4, 2011

Background:

We are using the Facebook API and receive back URLs for profile image thumbnails. Unfortunately the protocol is restricted to just HTTP and it doesn't support HTTPS. The page on our site that hosts the thumbnails is always delivered via HTTPS, and if we use HTTP for the thumbnails the user will receive security warnings from their browser.

Solution:

Build an HTTP Handler that "passes through" the image from the Facebook URL, but allow the handler to be called via HTTPS. Before I started coding I thought I could something like this:

Response.OutputStream = WebRequest.Create(FacebookUrlForThumbnail)

but I ended up having to save the image to an object in memory than write the image to the Response.OutputStream using the image save function.

Current Code:

[Code]....

This seems inefficient but I can't find a way of using the HTTP Handler as I orginally intended. Is there way of accomplishing the goal without creating the image memory and just "passing through" the call?

View 3 Replies

What Is HTTP Module And HTTP Handler

Jan 20, 2010

clear my concept What is HTTP module and HTTP Handler and how does they work while page requesting???

How authentication and Authorization process work in asp.net?

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved