C# - Why Doesn't Controls Collection Provide All Of The IEnumerable Methods
Jul 21, 2010
I'm not for sure how the ControlCollection of ASP.Net works, so maybe someone can shed some light on this for me. I recently discovered the magic that is extension methods and Linq. Well, I was very sad to find that this isn't valid syntax
var c=Controls.Where(x => x.ID=="Some ID").SingleOrDefault();
However from what I can tell, Controls does implement the IEnumerable interface which provides such methods, so what gives? Why doesn't that just work? I have found a decent work around for this issue at least:
var list = (IEnumerable<Control>)Controls;
var this_item = list.Where(x => x.ID == "Some ID").SingleOrDefault();
View 4 Replies
Similar Messages:
Jun 2, 2010
I have a DetailsView control which gets data from a IEnumerable custom class. But I can't get updated values from the control so I can process to update them manually in the database. How can I do that?
View 2 Replies
Jun 16, 2010
I placed one FormView and one GridView conrtrols on the same page with one linqdatasource that is connected to both controls via their DataSourceID properties. While the GridView works without any problem (on updating) the FormView doesn't update the record.I traced the FormView events and found that in FormView1_ItemUpdating the argument e.NewVaues.Count = 0 as well as e.OldVaues. Count (also zero). Getting items from e.NewValues[index] or [key] causes an obvious exception. However, all the bound contolsn this wa
[Code]....
View 3 Replies
Jul 2, 2010
In Key Press Event i have put the logic of search in textbox, when i press enter key it will take the values from textbox and brings the data in DataGrid.
In another event of GotFocus there is an logic of autocompletestring collection from Table. If i type a in that textbox it will shows all the suggested string in that.
If i comment the logic of GotFocus Event for textbox for autocomplete then only then Key Press events work else its not working. I dont know why its happening.
So GotFocus loic creates the problem.
[Code]....
View 1 Replies
Jul 26, 2010
I have a list of objects that I want to bind to a gridview. Creating that list and binding it works fine for most of the public properties in that list.
There are some objects contained in each of those objects... for instance there is an Address object.
object.Address.Line1;
object.Address.Line2;
When I bind this to my gridview, I have no issues with stuff like object.DateRegistered, but how can I access things like object.Address.WhatEverProperty? I always get this error:
"A field or property with the name 'xxx.xxxx' was not found on the selected data source."
View 7 Replies
Mar 25, 2011
I have an ASP.NET app with lots of textboxes all over the page that need updating at various points through program execution.
These textboxes actually belong to a certain class, so for easy updating I thought I could create a Dictionary(Of string, object) and add the control.ID and the control to it and then for updating do something like this:
(in case of updating textbox.text):
[code]....
However the text property of the textbox does not actually get updated. I'm mainly trying to avoid having to manually do textbox.text = somestring for each one of my textboxes every time I have to update them.
View 3 Replies
May 24, 2010
I am having trouble converting a ienumerable to a datatabe here is the code:The problem is in the following line-
ViewState("dt") = elements.CopyToDataTable()
Dim dt As New DataTable
Private Sub DisplayAuthorLastName(ByVal strLetter As String)
[code]...
View 7 Replies
Nov 20, 2010
question is same as in thread, but also i would like to see example of this.
View 1 Replies
Mar 14, 2010
I have a dataset that has two datatables. In the first datatable I have EmpNo,EmpName and EmpAddress. In the second datatable I have Empno,EmpJoindate, EmpSalary. I want a result where I should show EmpName as the label and his/her details in the gridview. I populate a datalist with the first table, and have EmpNo as the datakeys. Then I populate the gridview inside the datatable which has EmpNo,EmpJoinDate and EmpAddress. My code is
[Code]....
My Design is
<asp:DataList ID="Datalist1" runat="server" DataKeyField="EmpNo">
<ItemTemplate>
<asp:GridView ID="Gridview1" runat="server">
</asp:GridView>
</ItemTemplate>
</asp:DataList>
I do not get results in the gridview, instead have errors. I tried then placing the bound field
<asp:GridView ID="Gridview1" AutoGenerateColumns="true" runat="server">
<Columns>
<asp:BoundField DataField="EmpNo" />
</Columns>
It throwed an error stating / A field or property with the name 'EmpNo' was not found on the selected data source.
View 3 Replies
Oct 21, 2010
I am having a lot of the same issue as this poster did with errors on initializing type.
I am trying to learn linq and am about ready to give up - don't get how this is easier...
I'm trying to do a simple update to product names in the product table based on the manufacturer ID
In order to do this I am looping through each record. I was initally successful with changing all names in the column but when I try to query the data, I continually run into multiple problems.
The following poster has had the same issue I have but his solution isn't working for me.
[URL]
I keep getting the same error on the opening bracket on the select statement in the SelectByManufacturerID function...
Error 1 Cannot initialize type 'DataBaseDataManagement.ProductName' with a collection initializer because it does not implement 'System.Collections.IEnumerable'
Button that does the actual updating...
[Code]....
The function that the button calls to get the query... ERROR
[Code]....
The class located in Query.cs...
[Code]....
View 3 Replies
May 19, 2010
IEnumerable<DataRow> query = (from obj1 in objeDC.tmpPolicyRenewals.AsEnumerable()
where obj1.AgentCode == "Admin"
select new
{
obj1.Product,
obj1.PolicyNo,
obj1.Insured,
obj1.EffDate,
obj1.ExpDate,
obj1.GrossPrem,
obj1.Status
}) as IEnumerable<DataRow>;
Getting null value. whats error ?
View 2 Replies
Feb 8, 2010
Here is my code, using LinQ to get the data from database.
public IEnumerable categoryData()
{
db = new DBModelDataContext();
var cat = from c in db.Categories
select new { c.categoryname,c.categoryid };
return cat;
}
trying to get the values (categoryname and categoryid) into textfiled and valuefield of dropdown list.
dt = new clsData();
ddlCategory.DataSource = dt.categoryData();
what is the code that i need to write to assign the categoryname to textfield and categoryid to valuefield. I mean how to loop through the values coming from the above function.
ddlCategory.DataBind();
View 2 Replies
Nov 19, 2010
How do I accept an 'object' as a Datasource (IEnumerable or IList) and loop through the keys/values? I want to be able to pass anything that implements either IEnumerable or IList.
This same functionality exists on all of the .Net DataBound controls and I'm trying to figure out how it's done.
[Code]....
View 6 Replies
Jul 22, 2010
I want to delete the rows present in the DataTable by using LINQ (with out looping)
The deleted rows will be come from a LINQ as below
IEnumerable<DataRow> MobileQuery = (from d in dtBillDetail.AsEnumerable()
where (String.Compare(d.Field<string>("Destination"), "MOBILE", StringComparison.InvariantCultureIgnoreCase) == 0) select d );
The DataRows present in the "MobileQuery" should be deleted in the DataTable "dtBillDetail"
View 1 Replies
Aug 16, 2010
I have an extension method as follows:
public static class PageExtensions
{
public static int GetUserId(this Page targetPage)
{
var user = Membership.GetUser(targetPage.User.Identity.Name);
return (int)user.ProviderUserKey;
}
}
Now in a page I need to use this method in a static WebMethod, so I have added another 'extension method' to PageExtensions:
public static int GetUserId()
{
return (int)Membership.GetUser(HttpContext.Current.User.Identity.Name).ProviderUserKey;
}
and I call it as follows in my WebMethod: PageExtensions.GetUserId()
View 1 Replies
Jul 23, 2010
public class CacheHelper { /// <summary> /// Removes object with the specified key. /// </summary> /// <param name="key">The key.</param> [code]....
I have this methods for caching..I need to change this methods to use in aDictionary<string,object>
How do I need to change this code Because I am new to asp.net I am still learning..
View 12 Replies
Mar 31, 2010
I want to know that how i use the collection class for storing some data and save it letter in the data base.
View 4 Replies
Nov 9, 2010
I created one stored procedure.
/*
SP Name :sp_Par_SearchCourseFinder
Author :Mr.Ravichandran
[code]...
View 1 Replies
Apr 26, 2010
I am trying to create a list view to provide functionality similiar to the pages in this article(will end up being much simpler in my case)
[URL]
Basically I need three columns. Column 1 will be populated on page load with a list of user names and some data. Clicking on a user from column 1 will query for data regarding that user and bring back multiple rows to be displayed in Column 2. Clicking on data from a row in column 2 will return rows to be displayed in column 3. I am just curious as to how some of you guys would approach this. Ive looked at grouping templates and some articles regarding listviews with multiple rows but. Would it be easier to use 3 seperate listviews? Any ideas or articles to point me in the right direction?
View 2 Replies
Feb 25, 2011
i've got a gridview and sql datasource. Its connected to a stored proc that has four optional parameters. In VS when i set up the data source, if i use the test option, and dont supply any values for the sproc, it returns all the values in the table which is what it should do. Now when i try to fill the gridview, it wont return anything at all unless i provide values for all 4 parameters.
It's not even trying to search because i had sql profiler open and nothing shows up until i provide all 4 values. any idea why it's doing this? How do i get it to actually bind even if provide less then all 4 (or none) of the values?
View 1 Replies
Apr 26, 2010
know in asp.net 1.0 the grid display controls would pull all the data in, and then provide paging but the paging was done in memory.Are there any smarter controls that provide paging where they only pull the data relevent to current page being displayed?ie. select 10 rows for the current page, instead of doing a select of ALL the rows in the table.
View 1 Replies
Oct 23, 2010
I want to create Plugins or add ons for my application which provide search logic like google..
in asp.net is there any possibility then give me a answer>>
View 1 Replies
Mar 5, 2010
I have a page with a table and two button with the names (Submit and Add Rows) When I click on Add Row a new row will be added to a page(This is achieved using javascript), when I click on submit button I will be doing server side validation. If I found any error the error will be displayed on the page. During this process the controls which were added by me were loosing its state. As a result I need to add the rows once again and need to fill the data and click on submit button. Can any one let me know how to avoid this and see that the controls donot loose their states. So that there is no need for me to create rows once again if any validation fails on the server side.
View 1 Replies
Sep 16, 2010
I am beginner in web applications development. I started one little project and host it on source forge "https://homoco.svn.sourceforge.net/svnroot/homoco". And I started implementing authentication in this application to learn how it works. From my experience people never use out of the box things so I want to implement this stuff alone (like in real world projects). So some questions:
1) Is there any reason to use membership out of the box? To use database table schema, stored procedures etc. that tool generate for developer. I think that this lower control over code and I decided to implement it my self. I don't know if I am right.
2) Is my approach in this demo project good or bad (if someone have time I like to do just a little code review)? I created database based on business rules. Not using database schema that membership provider require. Extend "MembershipProvider" class to satisfy my needs. Implement queries to database myself.
3) Now, this question is a little wired but I have to ask it. If we make custom Membership Provider and do sql queries alone, implement all MembershipProvider class methods ourselves, and in application use Membership.blabla() why is this approach different from not extending MembershipProvider class and putting all this methods in some unique class and call its methods then? I hope that someone understand what I ask here.
I am sorry for three questions, but I really trying to find the best way to implement this feature in my demo project like it is a real world application.
View 3 Replies
Apr 1, 2011
I know that if I have set a cookie on a previous request, it will show up in my Request.Cookies collection. I want to update my existing Cookie. Are the cookies from my Request.Cookies collection already copied to my Response.Cookies collection? Do I need to add a new cookie with the same key using Response.Cookies.Add(), or do I need to use Response.Cookies.Set()?
View 1 Replies
