Generating Reports From Data?
Feb 27, 2010
In my current role, I support and develop a .net 1.1 website which was developed by my predecessor.
For generating reports/ invoices/ etc, the site uses a find and replace system reading a template rtf file with a stream reader and writing the output using a streamwriter to an rtf file.
I have been asked to generate a new report for the system which has many more tables than the previous reports and is generally more sophisticated.
I have taken a lot of time in trying to develop this report with not much success as the rtf formatting (e.g par for a line break) is to me quite difficult to master causing the document to crash infrequently in word (!) The rtf solution although frustrating is quite a simple format that can be managed in code. But it takes a lot of time to set up the documents...
Is there a .net code library or similar anyone is aware of that can write rtf to generate tables and other simple formatting. I am restricted to using .net 1.1
If I have the time would like to redevelop this system. I have googled for a more sophisticated system and have seen how to use html, etc. in word docs, but I don't really want to run word on the web server. What are the current best practices to generate invoices/ reports etc. from data using .net? Should I stick with this rtf method or is there an easier/quicker/friendlier way! In this regard I'd consider anything - .net 1 to 4
The application is a typical business system so any links to other resources for requirements such as a document generation system, email system, diary management (tasks to do for a specific user )
View 3 Replies
Similar Messages:
Nov 12, 2012
i cant access crysrtal report after deployment in IIS i have depolyed my website the pages where my crystal report is just blank .. how can i access crystal reports????
View 1 Replies
Jun 3, 2010
I am having one Asp.net 3.5 application with SQL Server 2005 backend. I am generating few complex crystal reports with some formula in crystal itself and complex paging and grouping constraints. Now we are planning to atomize this process. We have 10 reports on the screen so:
--user will click on each report
--report get open in Crystal Report Viewer
--User will generate PDF from crystal report.
Now, we are thinking to atomize this, rather than giving link to crystal, we want to generate PDF directly when that page opens rather than making above three steps. Is it possible to open Crystal report in memory, save it as PDF and close it? Well, we have data so you might think that why don't we directly generate PDF from data with the tools like iTextSharp or other but in that case what about the grouping, paging, formula which crystal handle itself?
View 1 Replies
Feb 26, 2011
I have to generate downloadable good looking pdf reports containing text and chart based data for a commercial application. I found out itextsharp library ( http://itextsharp.com/ ) but it isn't as powerful as I expect.
What components do you use for this kind of requirements? The price is important for me too.
View 4 Replies
Jun 1, 2010
After reserving a ticket for an travel agency, I want generate a printable report using Crystal Report. I'm looking for a way to do that. Any video tutorial or something like that?
View 1 Replies
Jun 10, 2010
I want to mak a Dynamic Report Generator with the facility to create the report structure and change the report information.
whether I can use any crystal report generating tool or have to make my own report generator
View 1 Replies
Apr 27, 2016
how can I generate weekly and monthly attendance report calculating total attendance for each student that I have in mu database table?
View 1 Replies
Aug 20, 2010
I want to create a trafic controlling system and show data in a tabular format. as follows
----------------------------------------------------------------------------------------------------------------------
August
1 2
3 4
5 6
7 8
9 10 .......31
How to achive this using any of the data control gridview, datalist or repeater control ?the numbers 1,2,3....31 are the days in a month while "HomePage", "Maps" etc are the name of the pages and the entry below each date will show no of users visited the page. I want to show the same for every month
i have fetched required data and the output is as follows .
PageId VisitedDate VisitCounts PageName
View 2 Replies
Jun 25, 2010
I have a xml file which is currently made manually and I have to make a functionality(UI) where user can enter the data and I have to store the data and generate the xml file dynamically in .NET.
Problem is the format of the xml file. I am not able to decide how I am going to store that data and then dynamically generate xml from that.
find the some of the extract of the code from the xml file below:
<?xml version="1.0" encoding="UTF-8"?>
<DATA>
<SDACTS>
<SDACT TYPE="Economy" COLOUR="0xff0000"/>
<SDACT TYPE="Environment" COLOUR="0x00ff00"/>
[Code]....
View 2 Replies
Mar 2, 2010
I have a simple function that is supposed to create a string of year values(separated by a comma) from a form that contains checkboxes for a set of years.
[Code]....
The problem is, it is doubling data somehow. For example, if I check the checkboxes for 2008, 2009, 2010, it will return :
,2010,2010,2009,2010,2009,2008
But I can't figure out why it is doing this...is there something I am doing wrong?
View 3 Replies
Mar 7, 2011
This is something I asked about a long time ago but there wasn't really a solution available at the time. There was talk of there being changes in a new roll out of EF where existing databases based on a model were simply ammended instead of being dropped and recreated every time.I was wondering if anyone knows whether or not there is something out there now that will let me retain the existing data when making changes to a model? If not, what is the best way for me to back up the data prior to a change and restore it post-change?
View 1 Replies
Sep 28, 2010
I am writing a web form in C# using VS 2008. My form accesses an Access database that has a list of Cusomers. Each customer has a customerID. My goal is to allow the form to automatically generate a new customerID each time a user clicks on INSERT. I need it to take the highest customerID from the DetailsViewand add 1 to it in order for the customer ID's to be sequential. I am assuming I need a loop for this or maybe an Arraylist?
View 2 Replies
Nov 24, 2013
I have basic understanding to cache webpages for duration. Now I have some complex requirements:
1. User e.g "Nauna" login in asp application
2. Visit on report page
3. Pass data range from 01-01-2013 to 30-12-2013 and extract the report which retreive data in 55 seconds on gridview
4. Now I want that when next time user "Nauna" login in the application and use the same report with same parameter 01-01-2013 to 30-12-2013 so that report should be come up from cache instead of run the complete life cycle.
View 1 Replies
Apr 19, 2010
I am having 2 text boxes namely
Bill No. & Bill date. In my project.
Now Here I want to generate bill no. automatically in some sort of sequence.
For ex: If once user clicks on the at that time if bill no. is WS 100
Then other time it must be WS 101.
It must auto increamented.
Same is for Bill date in bill date field I want system date to be taken everytime.
View 7 Replies
Sep 1, 2010
I am working on a small website for project management.There are around 15 database tables. Since i will be using asp.net 2.0, I wont be able to use LINQ.I need to finish the development of the website in a very quick manner.How do i generate the data access layer automatically. I found NHibernate as one solution, but it seems too difficult for such a small project.
View 2 Replies
Jul 7, 2010
I am displaying the output of a LINQ query in a Detailsview control. I have a Detailsview called DetailsCaAb and a DropDownList called DropDownList2, when the use makes a selection from DropDownList2 the Linq query fetches the data CatAbstract from the table CatagoryTables. e.g.
[code]....
Unfortunately I cannot seem to control what is displayed by the DetailsView, I only want to display CatAbstract, but the details view generates another column called Items. How do I ensure only the data I want is displayed? I need a way of controlling the columns generated programmatically.
View 7 Replies
Aug 3, 2010
I am using dynamic data entities linq to sql project. For my test project I have one table, with 10 columns and a single primary key for example. Almost all the columns are varchars.I can get the basic project up and running fine - update, delete, insert etc.ince it has no foreign keys, there are no search filters rendered. I was wondering if there was an easy way to generate a set of filters for the columns for this table. So a First name and last name search box. Is there a way to generate these filters for chosen columns and is there a way to generate these for all the columns
for example, above each of the columns in the grid there might be a text box ( I am not too fussed where the text boxes are rendered as such). Each of the text boxes will act as a filter for that column (doing a SQL 'like')
View 1 Replies
Jan 11, 2011
I want to generate serial number in gridview but the serial number should be equal to the count of records for a particular column(in my case No. of Villages).
I know how to generate serial number but i am unable to generate number of rows equal to the number of records of my datatable column(Village_Name---say for example 45 rows--- any no. of rows)
View 4 Replies
Jan 22, 2010
I am using following code to serialize class object into dataset. Storing the dataset schema in a viewstate, when I try to read the schema from viewstate getting following error.System.Xml.XmlException: There are multiple root elements. Line 20, position 2.Please let me know how to resolve this error.
CustForm cList = new CustForm();
cList.CustID = 10;
cList.CustName = "Testing";
[code]...
View 1 Replies
Jan 27, 2014
Base on the following article:
How to generate and download PDF Report from database in ASP.Net using iTextSharp C# and VB.Net. I have a Nested GridView implemented from the following article:
Gridview inside Gridview in ASP.Net using C# and VB.Net
View 1 Replies
May 24, 2010
I have a Gridview that I am using in a User Control. The grid loads great and my paging buttons that exist outside of the grid itself work properly. When I click my delete button inside the grid, I am getting an invalid postback message. How should I handle this? My control raises one event by the way.
View 22 Replies
Dec 1, 2010
In my Admin page, I have a drop down list containing all current user tables in the database. The user chooses one.
My DetailsView below uses that parameter to populate itself with data from that table. The stored procedure used to select the data passes a string to sp_executesql. The string is concatenated from a select statement and the tablename parameter. Can I do something similar for Update/Delete statements? I'm not sure of the best approach, given that I won't know which/how many fields will be in the DetailsView at runtime, and which of these are keys - the choice of table depends on the user. I think Insert will be straightforward - am I right? I would like to streamline things as far as possible. Is it possible to dynamically pass in the values in, say, a string, and get my stored procedure to understand them? And what's the best method of grabbing the values from the DetailsView in this situation?
View 4 Replies
Jun 13, 2010
I'm new to Visual Studio.NET . I need to integrate the crystal reports into an ASP.NET application. I generated Crystal report with the help of crystal report XI developer edition(Stand alone version and NOT from the one which comes from visual studio).
How to integrate this report with the web application.
View 1 Replies
Jul 16, 2010
We have quite a few reports which were developed earlier in Crystal Reports 8.5. We are now planning to use these reports in our web application developed in VS 2008 (C#).
What dlls are needed for calling 8.5 in the application and how should they be added to the application while shipping it to the client?
They are also struggling to get the code running. Would also need the code to call the report with parameters.
View 9 Replies
Aug 5, 2010
When i run the application locally it works fine but when i publish it n access from it it gives the error asEither the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
View 2 Replies