Iis6 - Permissions In Windows Server, ASP.Net Authentication?
Dec 19, 2010
I have a site on domain1. I need to open a ModalDialog with a Page on domain2. My Domain2 is protected not to allow anonymous access so i get a login window like:
My problem is, for this one functionality, i want users to be able to see that ASPX, through the ModalDialog, without authenticating.
I tried using the ftp way:(URL)
and i get a javascript error.
My site is hosted in IIS6, Windows Server 2003 and i have full access to the server.
View 1 Replies
Similar Messages:
Jul 31, 2010
I am having an issue with IIS6 and intergrated windows authentication that is driving me nuts, and I am hoping one of you guys can point me in the right direction.
I have written an ASP.net 3.5 application, and have installed it on a Windows 2003 R2 SP2. I have turned on intergrated windows authentication on, turned off anonymous access. using local host on the server itself I have no problems, it works, picks up the NTlogin.
However when I go to a clients machine (logged in as one of the users of the domain) and try to access the website
http://10.1.1.22/ I get asked for a username and password. If i enter a valid user name and password then I have no probelms. The NTlogin is picked up, application works.
But my issue is why does it come up with a username and password at all? shouldn't it just know this user is already in the domain, just go straight through to iis? how can i get rid of this? I have read multiple forums about server delegation etc... metabase.xml... nothing seems to work
View 4 Replies
Jun 22, 2010
Just got a new dev machine and am having trouble with this piece of code in our project. I have set folder permissions to give Network Service read/write accessFor dev, this is being ran locally on IIS 7.5. IIS Authentication settings are Forms Authentication and Windows Authentication enabled.I am getting a permssions error when the xml is written to the local hard drive.
PDFGenerator pdfGenerator = new PDFGenerator();
DataSet dataSet1 = pdfGenerator.GenerateDataSet(Parameters, xmlFilePath);
outputXmlFile = Guid.NewGuid() + outputXmlFile;
[code]...
View 1 Replies
Feb 15, 2011
I've been asked to upgrade a few applications and I'm planning on merging all of them into one asp.net application. I'm fine with this decision and have spoken with fellow workers and they also think it's the best option to go with.
The application will be accessed from a small group of users which belong to a larger domain. I'm currently planning on using Windows authentication and only allow this small set of users to access the asp.net application. Also there must be some role management, so that only certain users can view certain functionality.
I really don't want to have many different windows groups; so I want to avoid having to assign different windows groups to different folders and control permissions in the web.config.
What I'd like to do is:
- Assign one windows group to the small group of users who will access the page.
- Create a custom membership provider and control the user who accesses the application. Depending on the user I will then assign his current set of roles.
- Add an application setting to the web.config, with the name of the current administrator, so if he logs in, he will be assigned all roles, and will be able to create and assign roles to other users.
View 1 Replies
Dec 20, 2010
not sure if this is the correct place to ask this question, but I have deployed my asp.net application onto windows server 2008 r2, I can get the website to half work, but some code in it that detects the current lan id CurrentUserIDtextBox.Text = Context.User.Identity.Namedoes not work. this then causes problems later in the application for searching active directoy. All that is returned is spaces. I suspect this is something to do with setting the Integrated Windows Authentication as checked. In IIS5 I had this checked with Annonymous Access unchecked. In IIS6 I cannot find where this is set. I found an authentication icon which has Annonymous Authentication as Enabled, ASP.NET Impersonation and Forms Authentication as Disabled.Should there be an option for Integrated Windows Authentication?
View 6 Replies
Jul 7, 2010
I am running a web-site with simple .aspx files on a standalone workgroup Windows Server 2008 called 'Max'.I had assumed that the .aspx files were accessed by the 'Network Service' account.The application pool for the website is running with 'Network Service' as the process account.I was puzzled, since 'Network Service' had no permission on these files. So I added event level auditing to the files, and I was suprised to learn that the .aspx files were being accessed by an account called Max$ (ie the computer account).this correct ?Why is the Network Service account not being used ??
View 3 Replies
Nov 11, 2010
I'm trying to deploy my MVC 2.0 web application to a Windows 2003 server with IIS6, and can't find the means to do it. I read about clicking Build/Deploy, but I don't have this showing on my menu, and I have the professional version.
View 1 Replies
Jan 8, 2010
I have just installed SQL Server 2005. I selected windows mode authentication. I am not able to login in management studion. Now, I want to use mixed and server authentication option inplace of windows authentication. so, would that be possible after installation.
View 2 Replies
Jun 4, 2010
I have a web application set up on our intranet that uses windows authentication (successfully) that I am trying to link to a database running on a separate server.
The problem that I am having however, is that when I try to use a trusted connection to log in to the sql server, instead of passing the domain/username of the person using the website the application is passing NT AUTHORITYANONYMOUS LOGON.
I checked that the authentication was working by having the website display a greeting that does identify my username correctly when I log on to the site, so it isn't an anonymous access issue. I think it is an impersonation issue somehow despite the fact that set in the web.config file for the application.
Curiously, the web application works fine when I run it on either my dev machine or even locally through remote desktop on the production server. I'm not sure what's going on here.
Finally, I'm running iis 7.5, windows server 2008 r2 and sql server 2008
View 3 Replies
Dec 17, 2010
to connect the MS Sql server 2008 using windows authentication in ASP.Net 4.0 without change IIS user (ASPNet) permission.
View 1 Replies
Feb 1, 2011
This is a real quick question, is it possible to allow Windows Authentication for an ASP.Net intranet site (on a test server) to authenticate against the production server user accounts? If so, how would I go about doing so.
View 2 Replies
Aug 9, 2010
I have IIS 7 windows server 2008 R2 64 bit on which I have few web sites which are sending emails thorugh asp.net. Each web site has seperate "From Address (used inside the code)".
In IIS 6.0 mananger >> Delivery Tab >> Out bound security >>I gave Integrated windows authentication for one account (Let us say abc).
When the emails are firing from different applications, the emails are going only if the from address is abc mentioned in the authentication. If any other email address is used then it is going to bad mail folder saying "Diagnostic-Code: smtp;550 5.7.1 Client
does not have permissions to send as this sender".So to make it work I have changed the authentication to anonymous then again the emails are going to bad mail with "Diagnostic-Code: smtp;530 5.7.1 Client was not authenticated" error.
View 1 Replies
Sep 3, 2010
I have one web application which is configured to be use froms authentication.
But, I don't want to use SQL Authentication to connect to SQL server, I want to use windows authentication.
View 5 Replies
Sep 17, 2010
Just going to start making a web application and was wondering which was better, or at least what are the main differences between them (as it probably matters what I am using them for)?
View 3 Replies
Sep 30, 2010
Mixed Authentication Using IIS 7 On Windows Server 2008?
View 2 Replies
Dec 13, 2010
i am using windows server 2008 and IIS , somebody installed Dynamic Business Portal everytime users trying to use the portal they enter the servername or by ip @ of the windows server /Bp but a login authentication asking them to insert a username and password they can t login the system even they enter their windows authentication
I published another new ASP called Mytest users put name of ther server or ip of the server /Mytest they were able to access the page and no pop up asked them or authentication I added IUser and Everyone and enabled full access.. i check the PB configuration in IIS it was the same Everyone and Iuser are added and full access is enabled how to get rid of the authentication popup
View 4 Replies
Feb 21, 2011
I have an ASP.Net app, that runs using windows authentication. The connection to the SQL Server is usually done by creating a sql server account and using that in the connection string.
However, in this specific very restrictive hosting environment, we have been asked to use a specific WINDOWS/active directory account to connect to the SQL Server.
note it is not the windows credentials of the user of the website, we need to connect to the SQL server with - it is one specific windows/AD account.
How do I configure that in my connection-string?
View 2 Replies
Jan 17, 2011
I have an an intranet website running under IIS6 (under a specific port, not the default one) with a integrated windows authentication enabled and uses an application pool configured with a service account. the issue is, if I access the website using the server name with a fully qualified domain in the URL, it throws a login prompt (doesn't work even if enter my windows login credentials), but if I use the IP address of the server then it works fine. I need to do to get the URL with server name working.[URL]
View 3 Replies
Mar 2, 2011
I'm building an ASP.NET application, which will create Windows accounts and groups on the server, and set file/folder permissions for those accounts.
How do I accomplish that?
I've considered shelling out to CACLS.exe, but I got a feeling that's going to get me into other problems eventually. Are there any other options in the .NET framework?
View 2 Replies
Apr 30, 2010
I'm running Visual Studio 2008 on Windows 7. When I try to attach to a process, VS tells me to restart under different credentials (with elevated permissions).
So I have to restart VS and run it as Administrator. Is there a way to set it up so VS always starts with Admin privileges?
View 4 Replies
Mar 2, 2010
im using windows 7 home premium-64 bit,when i want to install sql server its not asking for mixed mode its directly creating windows authentication mode but i want to use sql server authentication mode,when im installing im unable to see any mode selection?
View 4 Replies
May 5, 2010
I'm using VS 2010 RTM and SQL Server 2008 on my clean development laptop, running Windows 7 Pro.
Using Visual Studio's Server Explorer, I can easily do an Add Connection by simply right-clicking, and then completing the dialog, and choosing "Use Windows Authentication". I can then click the button "Test Connection".
However, if I wish to do an Add Connection, and then choose "Use SQL Server Authentication", I get a message "Login failed for user 'appSlir'", as shown here:
When I try the same thing on my other development machine, which is VS 2008, SQL Server 2008, and Windows XP Pro, it works fine.
There seems to be a problem/bug that prevents Add Connection with "Use SQL Server Authentication" to SQL Server 2008, when running on Windows 7 Pro.
View 5 Replies
Mar 30, 2011
I want my ASP.NET HTTP handler to be invoked when a user opens an URL of this format:http://mySite/getStuff?id="actualId"In order to do that on IIS5.1 I had to open the IIS management console and map .* extension onto ASP.NET ISAPI handler so that the request is processed using ASP.NET in the first place.Turns out IIS6 console won't accept .* as a valid extension.I know there's such thing as URL rewrite, but I feel it's an overkill for such simple case.Are there some easier ways to pass all requests to URLs that don't have an extension to ASP.NET?
View 1 Replies
Mar 2, 2010
i have installed sql server express using windows authentication mode,but i have a doubt if we want to acces the data from front end we type like uid="",pwd="",servername="" but when using windows auth what credentials we have to give or there is no need of any details?
View 3 Replies
Aug 31, 2010
I have a requirement I should connect to MS SQL server under IIS Application pool account from ASP.NET application where Windows Authentication is enabled. I cannot use user name and password in connection string.
ASP.NET application should use Entity Framework 4.0 to work with data.
View 1 Replies
