i have user control which consists of tree drop down and modal pop up and text box just to view my hirerichal data in tree - drop down list
the problem is when i try to get value from drop down list in debugging mode PROPERTY EVALUATION FAILED Just Appers Execution Stopped.
every thing in request also PROPERTY EVALUATION FAILED
I am having crystal report nto my application. By using report document I am trying to export the report into pdf. But while trying that I am getting the exception "property evaluation failed" but the report is exporting. I want to know how to avoid that exception. So far I googled for that exception, I got some idea about calling response.end internally. But yet its not clear to me. I am giving some code sample here:
[Code]....
Error occuring here "ExportToHttpResponse".
I have a code block that contains around 320 lines of code. Everything runs fine when i debug it until i reach the section that updates a sql datasource. I am using:
sqlDScc.UpdateParameters("friendlyName").DefaultValue = friendlyName
I have 38 lines of update parameters before i call the sqldscc.Update When i put a break point before the update parameters all the values are correct at the break point at the end all the values are "Property Valuation Failed"?. I'm not using any response.end, response.redirect or server.transfer
[Code]....
I catch the error of "Property Evaluation Failed" for the sentence "Response.End" in the following code.
Sub exportToExcel(ByVal _DT As DataTable)
Dim dt As DataTable = _DT
Dim attachment As String = "attachment; filename=userlist.xls"
Response.ClearContent() [code]....
This is the question, how to open a modalPopup from a Asp:Link button inside a Tab panel?
Runtime error is Asp:Link ID not found, and thats because its in Tab Control, whats the work around?
I am quite new to asp.net. I would like to ask for some advice on how this scenario can be achieved. Here is the problem:
I have a 5 gridviews on my page. In each gridview, I have two important columns. They are SellerID and BuyerID. Because I already have too many gridviews on the page, I want to load a webuser control with a modalPopupExtender when either SellerID or BuyerID is clicked. That is to say if a user select a SellerID, the details information about that SellerID should be loaded with DetailView from the user control and if the buyerID is click, the details information about that buyer should be loaded with another detailview
from the user control as well.
My problem is I do not know how to get the Selected Value from the gridView since the DetailView is in the WebUserControl. One more thing, both SellerID and BuyerID are in the same GridView, so how can we distinguish when a user select a SellerID or vice versa.
i made user control which represnt a modal pop up
this is my user control
[Code]....
i want to user this modal popup at many page as user control but i cant treat with show() method of modalpopup
I have a user control that contains a modal popup extender.
I am using the user control inside of a repeater so it could be shown multiple times on a page.
Everything works fine if the repeater only contains one item.
When there are multiple user controls on the page I get the following error:
"Microsoft JScript runtime error: Sys.InvalidOperationException: Two components with the same id 'PosAdjPopup' can't be added to the application."
How do I get my user control to work with the modal popup extender when it will be used multiple times on a page?
Can I keep the modal popup extender in the user control or do I have to put it on my aspx page and trap the event on the button click?
I have three modal popups that are working properly because I test it the controls with simple plain text.
I placed a form view and a datalist in the first two modal popups and everything seems to be okay.
I need to place a user control in the third modal popup but everytime I place the user control I get a javascript error for that particular modal popup.
When I copy paste the same modal popup on a blank page and place the user control inside of the panel then the modal popup works perfectly fine.
I basically copy/paste the same code back where the other two modal popups are then I get the same JavaScript error.
The modal popup crashes first on:
this._popupElement.parentNode.appendChild(this._foregroundElement);
I have a web page with several databound (via their property's) user controls in a multiview in a formview.
I decided to try Ajax (Adding ScriptManager, updatepanel etc).
All works fine except for the user controls.
The controls I use to contain the usercontrol property values ((invisible) Textboxes or Hidden fields) lose their value when i change from ond multiview panel to another. (In other words: usercontrols on invisible multiview panels lose their property value's). (When I change a multiviewpanel all the property fields turn emty, when i hit the update button of the formview afterwards the emty values are propagated to the database. (resulting in loss of data)) Textbox seems to hold its value, hiddenfield loses its value (when changing from one multiview panel to another).
This seems to be a coplication of the multiview in combination with ajax.
I am developing a usercontrol which has a gridview control in it.
Now I want to set the datasoruce property of gridview. Datasoruce will be a generic list (List<Class>).
How to do this ?
I have user control in the master page. user control code behind page having public property called SetValue.
Now I want to set the value from content page .
have a asp:linkbutton (ID="btn_1") nested inside a modalpopup, the page wont compile as per error: cannot find ID="btn_1", if I place link button outside modal all is good. Im guessing this a find control issue
<ajaxToolkit:ModalPopupExtender
ID="ModalPopupExtender_1"
runat="server"
TargetControlID="btn_1"
PopupControlID="PNL1"
[code]...
Modal popup is inside the update panel. I have a dropdown control inside modal popup. When i select the data in the dropdown and click ok on the modal popup it always shows the dropdown selectedvalue as first index no matter what i select .
View 4 RepliesI have a user control which has some properties configured on it. I need to access (actually, only read) the values of those properties on the client. I have done it like this.
Code behind:
[Code]....
ASPX:
[Code]....
That works but, at the back of my mind, I'm sure I've seen a neater way of doing it, although I suspect that may have been on an Extender not a User Control. Pointers on that welcome.
Also, related to that, the User Control itself has an Id which becomes part of the name of all visual objects included within it. However, the User Control is not a DOM element in its own right (because it has no visible rendering) which [I think] means that I have to attach properties to one of the visible elements within it, and not to the control itself?
How can I get all the textboxes inside a create user wizard control using getElementsByTagName().
Below is my JQuery code:
[Code]....
The above code isn't displaying hint text when the textbox retreives focus.
I think there is something wrong with this getElementsByTagName("asp:TextBox"); , I have also tried getElementsByTagName("TextBox"); , getElementsByTagName(":textbox"); and getElementsByTagName("input"); .
But no one of them gets the textboxes array.
Can anyone tell what will be the correct syntax for getting all the textboxes inside a create user wizard control using getElementsByTagName()?
although I've searched already, but here is the thing:I have a ModalPopup wich have a Textbox, a Button and a GridView inside. The Gridview is binded to a SQLDatasource object, and the Select query is something like "SELECT field_1, field_2, field_3, field_4 FROM Table_Name WHERE field_1 LIKE '%@Parameter_2%'".This ModalPopup is used (or gonna be used) to search for a field, so the parameters received by the Query is the text inside the Textbox, I've linked thid inside the SQLDataSource Wizard.The problem is that everything works perfectly fine... inside the panel WITHOUT the ModalPopup Extender, but whe I add the Extender the filter function doesn't work.Here is my code:
[Code]....
Notes: I have a ScriptManager inside the MasterPage, so I don't have to insert one in every page. Also I've tested the code in a new page (the one I use for testing), and it works fine, it filters and everything, the problem is when I add a ModalPopup to the panel.
I have a GridView inside a ModalPopUpExtender and would like to know how I can ensure that I can work on the grid without the pop up closing everytime i click on say 'edit' or 'delete' on the grid items.
At the minute my pop up is working great, then i click on 'edit' on a row in the grid and it the pop up closes, I then click the button to fire up the pop up again and the grid is in the mode i wanted it to be in!
I have a custom control created to autofill the box as typed in. Its working great. But if I put the control inside an Update Panel, it works for the full postback but if partial postback happens (because of the update panel), it does not work.
View 7 RepliesI have this code:
TabSecciones.Tabs.Clear(); //the panel container
TabPanel nuevoTab =
new
TabPanel();
encabezadoSeccion encabezadoSec =
new
encabezadoSeccion();
//A user control, a couple of labels and a table
nuevoTab.Controls.Add(encabezadoSec);
TabSecciones.Tabs.Add(nuevoTab);
For some strange reason, the user control is "outside" of the panels, thus visible no matter what panel is selected... if I programatically insert another control (ie: a texbox) inside another panel, it works fine...
Is it possible to use ajax controls (as it is) inside a user control?
View 2 RepliesI have a requirement where in i have to create a common pop up extender for all the user controls.How can i achieve this by using ajax modal pop up extender?Please help out with the following questions i have.Is it possible to bring user control inside a ajax modal pop up extender.?If yes, Is it a best practice?How can we build a common Ajax Modal Pop Up extender so that it can be re used for all the user controls?Consequences we face while using user control inside ajax modal pop up ?Is there any better approach for having user control inside modal pop up.?
View 4 RepliesAutocompleteextender not working inside an user control tried all ways. i have a custom function.. inside the cs file itself like the following :-
[Code]....
I did something like this and it worked properly when it was in aspx but when i changed all this to ascx and when i added the user control in aspx the autocomplete is not working. say enablecontext = false; i have even tried that.. its not even reaching till that function. moreover i need contextkey to validate different autocomplete controls inside my page.
I have an ajax tabcontainer on a master page that has a user control inside one of its tabs.The user control is just a gridview that gets a list populated from a DB table.The strange thing is that the gridview is displaying in VS, but when I build the site the tab is empty; no error message just nothing.Below is the code for the tab in my master page:
<ajaxToolkit:ToolkitScriptManager
ID="ToolkitScriptManager1"
runat="server">
[code]...
I've got a web site that has a master page and that master page (mpMaster that has a user control ucControl1) which has a sub user control (ucControl2), this user control has a property which accepts a value. Now, I have a page that uses the master page
and on this page I have another user control (ucPageControl), I need to find a way of setting the value in ucControl2 from ucPageControl. Is this possible at all?