I have a user control that consistes of a dropdown menu, a label, a textbox and a button. It resides in a html table, what i would like to do is on a keypress, such as the "insert" key, i would like to add the same control again directly on the next row, I have used programs that do this, but for the life of me can't figure out how its done...
View 1 Replies[VS 2010 RC1, .NET 4.0, VB.NET]
I'm working with a simple UserControl someone at my company created. It's basically just a DropDownList with a RequiredFieldValidator and some added properties (such as "Required", which controls the CSS styling of the DropDownList and whether the RequiredFieldValidator is Enabled or not).
Here is an example of the UserControl usage where a SqlDataSource is used to populate the ListItemCollection. I'm trying to specify an intial ListItem below (and would like the ability to add multilple ListItems if necessary) but can't seem to get this to work...
[Code]....
My code-behind looks as follows:
[Code]....
I've found several posts related to this but cannot seem to get the declarative ListItem to be added to the DropDownList.
I understand that using a WebControl is another option, but I'd like to learn how to get this method to work if possible.
Here is what I am trying to do. I have a page with two link buttons and an updatepanel (the two linkbuttons trigger the updatepanel). I have two usercontrols which have labels with same ID's. When I click the first link button, I add the first usercontrol to the updatepanel and set the label value to datetime.now
when i click the second link button i add the second usercontrol but i see that the value of the label from the first control is set in the label in second user control. if the id's are different there is no problem - but in my case the usercontrols are being developed by different teams and I am integrating them in the way i mentioned - so they may have same ids.
I have a particular scenario and I would like to know how I can implement it in the most efficient way. I also have some queries related to this. The application is a AJAX 1.0-Enabled ASP.NET 2.0 Web application.
I have a link, which when clicked I need to show a pop-up div. The contents of the div will be displayed using a usercontrol. The usercontrol will display the contents based on a query string value.
I would like to know:
1. How can I implement this in the most effecient way. I don't want to use a separate page on which I will have the usercontrol and then display the page in the div.
2. Suppose I call a JS function ShowDiv() on the click of the link, to display the pop-up div. Say, I call the function this way ShowDiv('querystring'). Now how will I pass the value 'querystring' to my usercontrol.
I want to embed some image and java script file in usercontrol and extract them with code like this
[Code]....
i tried similar code that use this technique in custom controls , and it works ...
but i want use this technique in usercontrol ,
can any one put a sample source code or explain how can i use this technique in usercontrol ?
I have created lots of UserControls, but never tried CustomControl.Recently i created a Photo Gallery UserControl using Listview & Visual LightBox.Now i want to publish it as CustomControl.Here is my UserControl's code :
<link rel="stylesheet" href="LightBoxGallery/css/vlightbox.css" type="text/css" />
<style type="text/css">
#vlightbox a#vlb
[code]...
I have custom gridview that inherit from the regular gridview.
On of the features is that is has a built in page size dropdown in an extra header row.
Another feature is that this extra header row has a place holder where aditional controls can be added but here is where I have some problems.
When I add a control that is created outside the gridview to the gridviews builtin placeholder and tries to do anything that performs a postback the gridview dissepears, but appears again on a new post back.
Here is the code for the gridview:
[Code]....
And this is the way it is used in a usercontrol on page, the gridview is called gvList and the control that I try to add to its placeholder is the phrExtraHeaderControls:
[Code]....
What can be wrong, is the viewstate messed up in the postback so that the gridview can't be rendered?
I created a customDropdown usercontrol with Events and It worked fine.
Now I stored the path of the ascx file in the database table and i want to Load the ascx file and handle the Events dynamically in an aspx page.
To Load the usercontrol and access the public properties and method, I need to know the object i am trying to load, right?
For Example
FeaturedDDL c = (FeaturedDDL)Page.LoadControl("~/FeaturedDDL.ascx").
But I dont want to hardcode objectType "FeaturedDDL", coz i dont have that stored in my Database field.
Since I am loading the usercontrol by getting the path and name of the usercontrol from the database table,how will I know the ObjectType at that time?
How to accomplish that and also how to handle the events for these type of situation?
I tried both, loading the usercontrol when needed and I also tried adding it directly into the aspx.
Nothing worked. With the second one (what's meant to be the easiest option) I tried with delegates and events (but can't access de usercontrol event from page) and tried with properties (I can access properties but they're always empty)
How can I create a UserControl with a collection-type property which has a collection editor?
I've a CompositeControl with an ArrayList-type property which has CollectionEditor-type designer. You can see this property on Properties window with a "..." button which launches a collection editor. This works fine and all but I want to apply the same to a UserControl and I've couldn't manage to pull it off so far. I've done the same thing what I've done with my CompositeControl but the property either doesn't even show on Properties window of the UserControl or shows as a single value property with no "..." editor button.
This is what I've done with CompositeControl:
[Code]....
I have a DetailsView control bound to an ObjectDataSource within a User Control (.ascx). It appears that the DetailsView.OnDataBound event is being fired on every page load or postback.
I do not see this behavior with a similiar DetailsView directly placed on an aspx page.
when I add a custom usercontrol by code like this:
[Code]....
the compiler doesn't accept it at all...
how to access "custom usercontrol's properties" while the usercontrol itsef has been added programaticly by code.
I'm attempting to create a custom control that extends the Table class. Inside of the table will be rendered a number of different controls based on a specified identifying property. On some of these controls, however, I need to specify validation for data types and requirement.To me, the most logical way of doing so is to add validators to the table and set their appropriate properties to specify which controls to validate. In doing so, however, I've discovered that none of the validators added will even render on the page in which the control is added. So is this a valid construct?Here's an example of what I mean:
[Code]....
i create a custom control which can hold some templates, such as Header, Body Footer, etc.
[Code]....
i tried to use smarttags to allow the user to edit each of the templates, which worked pretty well. what i could not get working was to add a template if it has not been in the control. eg. add a header-template to the control above. i tried using the RootDesigner.AddControlToDocument() function of my controldesigner. but this function gives me an error, telling me the control i'm going to add the template (i used a new HtmlGenericControl("HeaderTemplate") as new Control) to is not valid. (i can't give the exact error message, cause i use a german version of visual studio 2008) i've been searching the web for nearly half a day now, but i did'nt find a working solution for my problem.
Does anyone know where I can find some info on how to support data binding in my control? I would like to get data primarily from a sql server.
View 3 RepliesThe built in Asp.Net Controls (label, Textbox, etc.) all have a CssClass property that can be set, what do I need to do to implement that for a Web User Control?
I know how to add a property and pass thru the get & set to the corresponding Asp.Net control (example if I have a label I know how to create a LabelCssClass property that provides a get & set, but the control itself how do I set a CssClass or ClassName property.
So what I'm trying to accomplish is this
[Code]....
The user control has public properties named accordingly and the page has protected properties accordingly which I've verified have the desired values.
For some reason the values are always empty strings or 0s in the usercontrol, no matter what the page property is.
I have developed a User Control in inline code model and convert this into dll and try to add it into Visual Studio ToolBox. It shows error "There is no component found in the object.". It is showing actually because i have not added ToolBoxData attribute just before the class declaration, because there is no class declaration in the inline code model. I don't know where i have to add ToolBoxData attribute.
View 1 RepliesI added this code in my ascx file [URL]..When it was aspx file..the image(location is "Images" folder in my project now..was flickr earlier) would display alright..but when I made this page into a user control and added it in my webform, the image's vanished..I have tried changing the path many times but its not working..The user control is inside of "usercontrols" named folder..image inside of "images" named folder in my page and my aspx page's at root level only..so I changed the image path in the css of usercontrol as follows:-
background-image: url(../images/myImage.jpg);
even tried
background-image: url(../../images/myImage.jpg);
and this
background-image: url(~/images/myImage.jpg);
but the Sprite image just won't display
Everything else in the usercontrol is getting displayed well ..just that image's missing..whats wrong?
Hope this is the correct forum for this question. I am using VWD 2010 an have a web project and get the following error upon execution:
Parser Error Message: Unknown server tag 'custom:AjaxValidator'.
My code is as follows in the .cs file:
[Code]....
[Code]....
I have what is probably a basic question but I do not understand if/why there is a difference. I have a simple asp.net page with a staticly created DropDownList and Panel control. The user can select one of three options if the drop down (Employee, Company, Address) which should load the respective custom UserControl into the panel below. By default, I have the Employee control selected in the drop down and it should be displayed on the intial Page Load (!Page.IsPostBack).
If I do the following it performs the desired behavior on the intial load:
[Code]....
If I try the following, the User Control does not appear on the initial page load:
[Code]....
I noticed if I do it with a textbox instead of a UserControl, it works however:
[Code]....
I assume there is some sort of behavioral difference in the way the loading is done between a UserControl and WebControl.
I have on my Page a Label control and custom UserControl. I want that, when something appears in the UserControl, it shoud change e.g the Label's Text property (as I mentioned, the Label doesn't belong to the UserControl). How to do that ?
View 4 RepliesI have a list box as given below:
<asp:ListBox
ID="TotalList"
runat="server"
Width="150"
Height="300"
SelectionMode="Multiple"
onselectedindexchanged="TotalList_SelectedIndexChanged"
></asp:ListBox>
and i want to delete the selected items on pressing delete key.
How can i do it from the server side?
I have a custom server control inheriting from CompositeControl. It consists of two RadioButtonlist controls that are rendered side by side in an html table. The number of ListItems in each RadioButtonList is not known until runtime. Depending on how many items each list contains, the RepeatColumns property of each list is set differently. To do this in the handler for the ItemDataBound event I need to get the count of ListItems in each RadioButtonList. How do I expose the Items.Count property of each internal RadioButtonList as a top-level property? I tried using a getter to return the count but this generates a compile-time error to the effect that the count cannot be assigned to--even though I have not created a setter.
Similarly, in the handler for the Submit event, I need to get the ClientID of each internal RadioButtonList to pass to a method that checks for data changes. How do I expose the ClientID of each component RadioButtonList as a top-level property?
I can of course index the Controls collection of the composite control to access the child control and read its properties--but that defeats the whole point of making a complex, independent custom server control.
I have this webform which displays some information from the database in a textbox named createdby as shown in the code
I have a datagrid which has the following columns which get displayed
[code]...
now I want to add two new columns to this datagrid named createdby createdtime which is the data in the above textbox.I have posted html and csharp code for existing.
[code]....