Web Forms :: Custom Errors Tag Should Then Have Its Mode Attribute Set To Off
Jun 12, 2012
To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
I got this error at time of running ma published website but only for 1page this error occurred how it can be solved.
View 1 Replies
Similar Messages:
Jul 19, 2010
I have custom errors set in the web config file as follows:
<customErrors mode="RemoteOnly" defaultRedirect="GenericError.aspx" />
Fine and dandy... I like that mode="RemoteOnly" facilitates development...
For unhandled exceptions, I have in global.asax:
Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs)
Response.Redirect("GenericError.aspx")
End Sub
However, unhandled exceptions are going to the generic error page instead of the informative yellow screen of death preferred by developers. I can comment out the redirect in global.asax, but then I need to remember to change it for the production environment. Is there a way I can check in Application_Error whether I am remote or not to determine whether to redirect?
View 2 Replies
Jul 2, 2010
I have a C# web forms ASP.NET 4.0 web application that uses Routing for URLs for some reason custom errors defined in the system.web section of my web.config is entirely ignored and it will fall back the IIS errors.
This gets entirely ignored
[code]....
This would be a minor inconvenience except that by the fact it falls back to IIS native instead of my application it completely circumvents Elmah logging my 404 exceptions correctly.
View 3 Replies
Feb 15, 2013
To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".i got this error during login time on the server how it can be solved
View 1 Replies
May 7, 2015
I want put custom error page in my website so I wrote below code in web.config
<httpErrors errorMode="Custom">
<remove statusCode="404" subStatusCode="-1" />
<error statusCode="404" subStatusCode="-1" prefixLanguageFilePath="" path="error-404.aspx" responseMode="ExecuteURL" />
</httpErrors>
is it correct?
or I should put other code?
View 1 Replies
Mar 24, 2010
Here's my Application_OnError event sink in global.asax.vb:
Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Dim fourOhThree As Integer = DirectCast(HttpStatusCode.Forbidden, Integer)
Throw New HttpException(fourOhThree, innerMostException.Message, innerMostException)
End If
End Sub
You'll see that if we've got an innermost Exception of type AccessDeniedException we throw a new HTTPExcpetion with a status code of 403 AKA 'forbidden'
Here's the relevant web.config entry:
<customErrors defaultRedirect="~/Application/ServerError.aspx" mode="On">
<error statusCode="403" redirect="~/Secure/AccessDenied.aspx" />
</customErrors>
So what we're expecting is a redirect to the AccessDenied.aspx page. What we get is a redirect to the ServerError.aspx page.
We've also tried this:
Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Context.Response.StatusCode = DirectCast(HttpStatusCode.Forbidden, Integer)
End If
End Sub
Which unsuprisingly doesn't work either.
View 1 Replies
Apr 25, 2010
I have a simple HttpHandler that generates a dynamic image based on query string parameters and a custom web control that renders an image tag pointing to the handler as its 'src' attribute. All works fine when run in the web server, but at design timethe control displays as the "missing image" icon (red x in a box). The handler is registered in the web.config with a ".ashx" extension. The RenderContents method in the control looks like this:
output.AddAttribute("src", ResolveUrl(string.Format("~/Sparklines.SparkHandler.ashx?stype=pm&w={0}&h={1}&sv={2}&ev={3}&cv={4}&sc={5}&ec={6}&mc={7}&gs={8}",
Width.IsEmpty ? 100 : Width.Value,
Height.IsEmpty ? 15 : Height.Value,
caleStart, ScaleEnd, CurrentValue,
ColorUtils.ColorString(StartColor, true),
[code]...
View 5 Replies
Jul 22, 2010
I have some code which is rendering some custom attributes of Hidden Control (without runat=server).
Something like,
<input type='hidden' id = 'hdn1221' name = 'hdn1221' OldValue = '12' OldMode = 'A' />
And I have a lot of these hidden elements on my form.
When I submit the form, I am looping through a set of ids, say 1200 to 1250, so I will read controls based on that, and also hidden with Request.Form["hdn<Id> "]
Now problem is, as we know we get value attribute from form when we do Request.Form["id"] for hidden, I want to read my custom attributes from hidden element. Is there any way? Note that, I can not touch the rendering part here.
View 5 Replies
Jan 17, 2011
How do I do something like the following:
[Code]....
View 2 Replies
Jul 30, 2010
[Code]....
I am having a problem setting the SystemObjectRecordID attribute of my custom control inside a repeater. Currently, the value winds up as zero in the database. Things I have checked:
1) The datatype of the DB column (bigint) and the datatype of AlertId (long) and the datatype of the getter/setter SystemObjectRecordID variable (long) match.
2) If I set '<%# ((Alert)Container.DataItem).AlertId %>' to the Text attribute of a label I get the expected results. So, it has something to do with my custom control and specifically how data isbound to the SystemObjectRecordID attribute.
Now, going to the server, below is what I have for databinding (The page is Default.aspx.cs and the namespace is Company.ProjectWeb.Profiles):
[Code]....
Currently I am trying to pass the value received from a literal (because I know that the values are received as expected here) to the SystemObjectRecordId object. Still isn't working. I am still getting a value of zero when I set a breakpoint and look at the value of SystemObjectRecordId in the codebehind of my control:
[Code]....
View 10 Replies
Aug 16, 2010
I was wondering, how about can i databind some custom attributes to my Radiobuttonlist / Dropdownlist / Checkboxlist? My existing code as follows:
With Me.ddlOtherApplications
.DataTextField = "ApplicationName" + Me.iSolutions_SysVariables.sys_iLanguage.Replace("-", "")
.DataValueField = "ApplicationID"
.DataSource = dtOtherApplications
.DataBind()
End With
However, I have 2 more additional custom attributes: ApplicationID and ApplicationImgUrl..... how abt do i databind these 2?
View 6 Replies
Dec 3, 2010
[Code]....
Custom errors only working with file name
View 2 Replies
Mar 18, 2011
if I am redirecting to an error page from global.asax file, can I get hold of the page in which the error had originally occurred?
View 3 Replies
Mar 16, 2010
I'm trying to set up custom errors for asp.net in webconfig/global.asax on Server 2003, IIS 6. Got it working find for .aspx pages but not for any htm or html pages. So I found the article describing how to open IIS manager, click configuration, copy path for .aspx extension and add one for .htm Did that.
Restarted website: Now I get the blank white page explaining there's a problem but not the 404 page not found
Restarted web services: same thing
View 5 Replies
Oct 12, 2010
how to disable asp.net custom errors only for a specific ip address? this will ease debugging exceptions on my server from my office..
View 2 Replies
Mar 18, 2011
I am using asp.net 3.5 web.config to limit access and it works great.
<authentication mode="Windows">
<authorization>
<allow users="Bill, John"/>
<deny users="*"/>
</authorization>
Unauthorized (but authenticated) users will be blocked by a system error message saying that:
Server Error in '/' Application Access is denied.
Description: An error occurred while Error message 401.2: Unauthorized: Logon failed due to server configuration.
In order to make the message more friendly, I uncomment the customErrors flag and create a GenericErrorPage.htm in the root path of my project.
<customErrors mode="On" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
However, it just doesn't work. I still get the system error message rather than my custom error page.
View 1 Replies
Oct 22, 2010
i have uploaded my site [URL] it it working properly on local machine but when i uploaded on server i am facing 1 error on button clik of any form. there are two ages career and contact whenever i submit this data by clicking button i get this error. Server Error in '/' Application. Runtime Error Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
[Code]....
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
[Code]....
View 3 Replies
Jan 31, 2011
I've a listview with object datasource as source control.
I'm using listview events for update and delete.
on update event i.e in itemcommand==update , I'm rising a javascript event on validation.
So when this validation raises I want the listview to be edit mode on the same row.
For this under Listview updating event I used the following:
[Code]....
but I'm facing the below error:
Updating is not supported by ObjectDataSource 'odsCategory' unless the UpdateMethod is specified.
View 2 Replies
Jun 22, 2010
I've searched a fair bit round and tried a number of potential solutions, suggested on their respective threads on various sites, to which none have worked for me.
My objective is to make sure the date entered, and to be stored, is not 'less than' (before) the present datei.e. Booking a reservation for a restaurant.
The first is:
"The ControlToValidate property of 'cvDate' cannot be blank..."
I've tried specifying it in page_load and .aspx source, the same has happened in both, in addition to ValueToCompare. I cant understand why it cant detect it?
C# (ControltoValidate):
Csharp Code:
[code]....
View 5 Replies
Jul 8, 2010
I am a more than a little confussled, my build succeeds with no errors but when I run without debugging only my error page shows up? I tried switching the custom errors to "Off" but it still shows up the error page.
View 5 Replies
Feb 2, 2010
For some reason the Custom Errors for 404 pages are not working on my production server, but they work fine on development. Instead of going to the custom 404.aspx page, it goes to the ugly IIS 404 page.
Here is my Custom Errors protion of my web.config:
[Code]....
I changed the defaultRedirect to also go to my 404.aspx page just to make sure I was catching everything, but still it does't work. I know I could change the IIS 404 error to also point to my 404.aspx page, but that will not work for me because I need to capture the "aspxerrorpath" in the querystring for .net 404 errors. The IIS method will not give me that.
I am just hoping it is a server configuration I missed somewhere, but everything on production looks the same as on development.
View 9 Replies
Mar 8, 2011
Supposing I have a user control like this <MyTag:MyWidget runat="server" /> I am wondering if I can do something like <MyTag:MyWidget runat="server" MemberHeight="400" PublicHeight="200" /> So that in MyWidget.ascx I can have <div height="<%=IsLoggedIn ? MemberHeight : PublicHeight%>"> or something like that...? Because I want the height to vary in each page that is using this widget.
View 2 Replies
Mar 2, 2010
I want to create a single custom authorization attribute to be added to controller actions that require authenticated users.
My first shot at this, so I may have it all wrong
Got 3 Roles which corresponds to 3 Areas in my application (Client app, so I'll just call them RoleOne, RoleTwo, RoleThree and AreaOne, AreaTwo, AreaThree).
Each area have similiar (to a point) views and actions, like Sign Up, Area specific home, etc.
In the attribute I want to determine the current area, controller and action. Then I just add code like:
If not logged in, and in AreaOne, go to AreaOne Signup (etc)If logged in as RoleOne, and AreaOne Home is requested, go there, but if AreaTwo Home is requested ,go to AreaTwo Signup So in my attribute class I need to determine the current area, controller and action, and see what kind of user we have logged in (if any)
Using ActionExecutingContext it seems I can determine the contoller and action method names, however I cannot find the Area name, and altered the attribute to be called like this:
[Code]....
View 4 Replies
Nov 7, 2010
I am trying to create a minimum length validation attribute which will force users to enter the specified minimum amount of characters into a textbox
public sealed class MinimumLengthAttribute : ValidationAttribute
{
public int MinLength { get; set; }
public MinimumLengthAttribute(int minLength)
{
MinLength = minLength;
}
public override bool IsValid(object value)
{
if (value == null)
{
return true;
}
string valueAsString = value as string;
return (valueAsString != null && valueAsString.Length >= MinLength);
}
}
In the constructor of the MinimumLengthAttribute I would like to set the error message as follows:
ErrorMessage = "{0} must be atleast {1} characters long"
How can I get the property's display name so that I can populate the {0} placeholder?
View 1 Replies
Mar 28, 2011
If I were to specify a page for redirect using the ASP.NET Custom Errors feature, would my application still spit out the HTTP status code for that particular error?
For example if had a line in my web.config that had all Internal Server Errors redirect to Errors/500.aspx and then I encountered a 500 error, I would then be redirected to my custom Errors/500.aspx page. Will my application still respond with a HTTP 500 at any point in this exchange?
View 1 Replies
