Configuration :: "Could Not Load Type" When Trying To Launch Web App On Server
May 5, 2010
Although I have seen dozens of forum questions relating to "Could not load type", none of the advice in them seemed to apply to my situation. I wrote a new web application using aspx.net VB 2005. It is tiny, with just 2 pages, 1 of which has no code-behind. It runs aok in the IDE but when I installed it on my pc (and also when installed on the production server), and tried to run it this error came up:
[Code]....
I checked the web site properties in IIS and the correct ASP.net version is specified: 2.0.50727. I checked the virtual path and it looks correct too: /EMTTrainingDatabase pageMain source code header looks like:
[Code]....
Some posters suggest that the bin is in the wrong folder or the bin doesn't contain the right contents. I don't have enough knowledge to evaluate this.
View 4 Replies
Similar Messages:
May 24, 2010
I can not figure out what the problem is with my programming. There is no problem working locally, but uploading and making live is where this problem occures.
View 1 Replies
Mar 17, 2010
I have an ASP.NET 3.5 website application using C# and SQL 2005 running on a web server. Now the application has the ability to create new aspx pages with content and the relative aspx.cs and design.cs pages needed on the fly and store them in the base directory on the server. Think of it as a crued Visual Studio website on the server for admin to click a few options on a page then the new pages are created for them without the need of a web developer. This all works fine and the code is working 100% (for the moment).
My problem now is the following: When i now navigate to this newly created page i get the following error - Parse Error : Could not load type 'Namespace.PageName'
I've looked into the reasoning and microsoft say "These errors occur if the .aspx page contains a reference to a code-behind module and if the application has not been built." Which now makes sense the application does not realise that these new pages are part of its system even though i can navigate to them.How do i get the system to recognise these new pages and rebuild itself accordingly?Now i cannot rebuild the system localy then reupload to the server, this needs to be accomplished on the server by the system, because the site cannot afford to have down time everytime admin decide to add new pages.
View 3 Replies
May 7, 2015
I have this error : Unable to lunch this iis express web server.port '1032' is in use ....
View 1 Replies
Jun 22, 2010
I have written one class for rewriting. I need to add <HttpModules> for that. I have added it like following
<httpModules>
<add name="Rewrite" type="RewriteModule, App_Web_wwq6c-c4"></add>
</httpModules>
But it is giving me the error Could not load type 'RewriteModule' from assembly 'App_Web_wwq6c-c4'.
View 3 Replies
May 20, 2010
I have build an web application in Visual studio 2005. Its working fine in the loal. But When I upload the same web application in the remote server, It produces the error,Parser Error Message: Could not load type '_Default'. I have tried the rebuild solution, rebuild website, and rebuild project. But the error remains same.If any one came accross similer error and resolved the issue, Please help me to solve this issue.
View 1 Replies
Mar 2, 2011
i created a site called birthday_calendar in vwd 2008.. it runs in my local system correctly, but when i host this site, it showing error"Could not load type: birthday_calendar".. what is the wrong with this? I just copied the website files to hosting server. I dont have any bin folder in my website containing dll files.. i googled this error, results are showing that, the website should be compiled and bin folder should be in correct place.
View 1 Replies
Jul 24, 2010
I have created a web application project in vs2005. This is a simple website which has one form and a master page. It runs fine in my local machine but when I publish it to my hosting server it shows error in master page i.e.Parser Error Message: Could not load type 'WebApplication1.Site1'. Site1 is my master page.
The line on which the error is occuring is
[Code]....
View 5 Replies
Jan 7, 2010
I cannot get beyond the following error message when trying to load any new project or soultion of any type:
View 2 Replies
Mar 23, 2011
I am developing the Windows Live@edu SSO integration with asp.net custom code.It uses the DLL called "System.Management.Automation" for executing Windows powershell v2.0 commands for connecting Outlook Live Apps.It works fine in localhost,but during deployment in Windows server 2008 , it shows error called
Could not load type 'System.Management.Automation.Runspaces.PSSession' from assembly 'System.Management.Automation, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'."
View 2 Replies
Sep 4, 2010
what I reakon should be a simple question for one of you code gurus out there.
ok here is my code VB snippet that I pasted from my web app, and if this is the wrong forum .
[code]....
View 2 Replies
Jun 25, 2010
I copied the ascx,ascx.cs and ascx.designer.cs from another (our old site) website into the new site but i am gettin the error on the 1st line of the control:
<%@
Control
Language="C#"
AutoEventWireup="true"
CodeBehind="Bar.ascx.cs"
Inherits="TT.Bar" %>
View 3 Replies
May 29, 2010
It is an online game, I need to develop a 'Launch' button on the game site to launch the client side game. I have seen this in several online games like this one. How can this be done?
Note: I am using ASP.NET to develop the website.
View 2 Replies
Jul 6, 2010
I recently installed VWDE 2010 and SQLE 2008 R2 and have built a basic site, but when I try to launch the Web Site Administration Tool, it fails to come up in a browser window. The server starts and I can right click on that and choose "Open in Web Browser", but when I do that an error message immediately shows up saying, an error was encountered. Please return to the previous page and try again with no other information given. When I click on "How do I Use this Tool?" in the top-right corner of the window, it immediately says the following:
Tool Has Timed Out
As a security measure, the Web Site Administration Tool times out after a period of inactivity. Changes to machine.config or web.config may also result in the tool needing to be restarted. To continue configuring your web site, restart the tool. The same message immediately comes up no matter what tab I click on. I have searched the internet and have made sure that the path doesn't have any spaces or non-alphabetic characters, run aspnet_regsql, restarted the IDE as well as the computer, but nothing works.
View 5 Replies
Nov 6, 2010
Line 1: <%@ Page Title="" Language="C#" Master PageFile="Site.Master" AutoEventWireup="true" CodeBehind="page1.aspx.cs" Inherits="default.page1" %>
It works when i run the project on my computer but after uploading it to my hosting site i get that. The site is running all .net up to 4.0. Ive tried rebuilding the entire project. deleting the default.dll and building. Also tried replacing CodeBehind with codefile and that didnt work.
View 7 Replies
Feb 7, 2011
so I'm in a strange development situation and am a noob at the bits I'm tasked with - just to make life fun and interesting.
My fellow developer has written programs in VB.Net and placed them on the server. He wants a web front end that users can click a link and have that run the program on the server.
Sounds simple, but I've spent days searching the internet and found only two solutions one of which looks sketchy on security and the other is so complex I'm not sure how to make it fit my local variables.
I'm writing ASP.Net on an MVC Framework using C#.
So, in terms for the simple minded to understand, is there a way to do this? Are there links which I used the wrong keywords and completely missed?
View 2 Replies
Feb 22, 2014
I just upload my website to godaddy server and i am having an error.
The error is: The type or namespace name 'RssFeedClass' could not be found (are you missing a using directive or an assembly reference?).
Where 'RssFeedClass' is an object instance of my class file.
View 1 Replies
Aug 26, 2010
I have a web app that delivers a page at .35 seconds on development server.But on production it takes 2.79 seconds.Is there a tools that is cheap that I can use to determine why the page is being delivered so slow?
View 2 Replies
Aug 11, 2010
I have a web site using Forms Authentication that downloads a PDF file specific to the user from a page. On the development server I have it working fine, on the live server it checks to see if the file exists and fails (correctly) if it doesn't, but does not load the Dialog Box to save/open/cancel if it does exist. Any ideas ? There are no events logged, the code is as follows and by the way I have tried various combos of WriteFile/TransmitFile as per other forum posts - many combos seem to work on development machine(!!) but fail on live...
Dim
fiPDF
As
New FileInfo(strReportPath) [code]....
Exception message: The remote host closed the connection. The error code is 0x800703E3.
View 3 Replies
Mar 20, 2010
I have an application which is used by others on different server without problems. The app was programmed by a programmer who is not available now. It was developed on .net 2.0. The windows 2003 is a new server, asp.net is enabled. from iis, I can configure it to use asp.net 2.0....,
but, when I load the site, it always show the 404. even after I change the default.aspx to a blank page, it still shows 404. however, if I put a default.htm in the folder, and it can be loaded without problems.
what can cause this? how to fix it? if I installed a vs2005 express on the server, will it fix the problem?
it seems the asp.net 2.0 dll is not recognized on server. never had this problem before.
View 1 Replies
Jun 4, 2010
i am trying to upload my site and no matter what i do,i keep getting the error -Could not load type 'myNamespace.fileName",the very first line of .aspx file?? My host says ,there is a problem in my code..i am not sure what am i suppose to change....i am using VS2005, .NET 2.0..everything works fine on local machine but not on host server. i am totally stuck on that after googling around
View 5 Replies
Dec 28, 2010
Is there anyways to launch Cassini web server from a command line? The exe appears to be in this path, C:Program Files (x86)Common Filesmicrosoft sharedDevServer10.0
View 1 Replies
Nov 12, 2010
I am not sure if I have found the right forum for this one.
the problem is:
I have a .licx file in my rootfolder.
I am getting the error:
Error 53 Unable to resolve type ' <add type="TabStrip" version="7.0" />' C:inetpubwwwrootCrop_ApplicationCrop_Applicationeo_web.licx 7 Crop_Application
,which I get for all the types that are in the xml file(i just gave one of them).
A friend told me that I have to add the type .licx in the MIME type in the IIS .
The problem is that I find the MIME type, I add the extension type .licx but I do not know the MIME type for .licx
View 1 Replies
Jul 6, 2010
I keep on receiving this error. I have no idea what happened. I thought I deleted the postpropertyDataContext? I look in the appdata folder and I have the right database there PostPropertyDataContext. I am not able Redirect to another page and get this error?
Server Error in '/' Application. Could not load type 'postpropertyDataContext'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Could not load type 'postpropertyDataContext'.
Source Error:
[Code]....
View 2 Replies
Apr 15, 2010
I got this error and do not know how to solve it.
I've got a subweb as application. It's called ADMIN. It works fine when running locally but when deploying in the development web server, i got the error: Unable to cast object of type 'System.Web.HttpApplication' to type 'Microsoft.Practices.CompositeWeb.WebClientApplication'
I've got a App_global.asax.dll and App_global.asax.complied on the subweb folder Admin.
View 1 Replies
