I have a problem, its completely i dont why this happening.say i have site its workign most of places.but when i'm check some place its going to custom error pagei'm using url rewriting handler, is it may be?
View 1 RepliesI have an ASP.Net website and I want to use a custom error page. I put the following code in my web.config
<customErrors mode="On" defaultRedirect="~/error.aspx">
<error statusCode="404" redirect="~/error.aspx" />
</customErrors>
The problem is when i go to a URL that does not exist is still uses the 404 error page specified in IIS Manager.Question: How can I make it use the error.aspx page I have created? Why do the settings in IIS Manager override the web.config?
I am currently designing an ASP.Net web site where does not required any user login on the page. However, I do need to put an Admin page up along with this web page for my client use to manage the content on the page (e.g.: Change Pictures, Updating News). For security reason, I do not want to include a separate page sit reside in the site, so nobody can even try access to the page [URL]
View 6 RepliesI want put custom error page in my website so I wrote below code in web.config
<httpErrors errorMode="Custom">
<remove statusCode="404" subStatusCode="-1" />
<error statusCode="404" subStatusCode="-1" prefixLanguageFilePath="" path="error-404.aspx" responseMode="ExecuteURL" />
</httpErrors>
is it correct?
or I should put other code?
I was wondering if someone could point me in the right direction:
How do I generate a custom error page with the error message and get it to mail me that error message?
Is there a good tutorial out there that someone could point me 2.
I'm having a wicked time trying to redirect the different error scenarios to a custom error page. Basically, I have put some code in Application_Error in global.asax, and done the necessary web.config settings to use Custom Errors.
In global.asax on Application_Error, I stored the Server.GetLastError in Session. The reason I have to store it in Session is because (as far as I know) you lose the exception when using "ResponseRedirect". And the reason I have to use ResponseRedirect is because I am using an UpdatePanel with AJAX calls, and any exception during the AJAX call shows up as a JavaScript error, and doesn't get handled using the custom error page (see this post).
void Application_Error(object sender, EventArgs e){ ////must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { Session["LastException"] = Server.GetLastError(); } else { // (I think this happens when there are compile-time errors) Server.Transfer("~/Oops.aspx"); }}void Session_Start(object sender, EventArgs e){ //must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { //initialize the session (http://forums.asp.net/t/1405077.aspx) Session["LastException"] = ""; }}
I am trying to handle the unhandled exceptions in my project.I tried with this following code in my web.config filebut it is not at all redirecting to an error page which i have created instead of that it is throwing an exception in my code itselef. How to print the error description over therein my custom error page.
---------------------------------------------------------------------------------------------------
<sys.web>......<customErrors mode="On" defaultRedirect="~/Error.aspx"></customErrors>...</sys.web>
---------------------------------------------------------------------------------------------------
And even i tried in Global.asax page in Application_Error() method like below
Exception ex = Server.GetLastError();Response.Redirect("~/Error.aspx?errmsg="+ex.message);Server.ClearError();
And in my Error.aspx.cs page i have placed a label and i have written code like this
protected void Page_Load(object sender, EventArgs e) {
Label1.Text=Request["errmsg"];
}
But it is not getting redirected my error page and not displaying anything on it.
I am showing Custom Error in my page.if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page.I am attching the Screen shot.Can any body help me out how to show the Error page on entire page if something happend in any where submaster or other page.Here is the code that I am using in web config file to show custom Error page..
[CODE]...
Here I know the issue what's going on.This issue is occurring because i am using AJAX to partially load the contents of the tabs after the initial page load so the error is occurring AFTER my master page has been loaded.What I need to do is provide a javascript function to handle the error after the ajax call has returned and redirect to the error page.How to write this Javascript and where Do I need to write this?
Can anyone send me proper configuration settings in web.config for ASP.NET 4.0. I am unable to redirect pages to desired url on page not found. It seems there are changes in properties as compared to previous framework.
View 2 RepliesAjax calendar control not working properly with content place holder of Master Page.Most of time Calender Control hides when mouseover with out changing date in content place holder of Master Page.same code works in normal aspx pages.
View 2 RepliesHere's my Application_OnError event sink in global.asax.vb:
Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Dim fourOhThree As Integer = DirectCast(HttpStatusCode.Forbidden, Integer)
Throw New HttpException(fourOhThree, innerMostException.Message, innerMostException)
End If
End Sub
You'll see that if we've got an innermost Exception of type AccessDeniedException we throw a new HTTPExcpetion with a status code of 403 AKA 'forbidden'
Here's the relevant web.config entry:
<customErrors defaultRedirect="~/Application/ServerError.aspx" mode="On">
<error statusCode="403" redirect="~/Secure/AccessDenied.aspx" />
</customErrors>
So what we're expecting is a redirect to the AccessDenied.aspx page. What we get is a redirect to the ServerError.aspx page.
We've also tried this:
Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Context.Response.StatusCode = DirectCast(HttpStatusCode.Forbidden, Integer)
End If
End Sub
Which unsuprisingly doesn't work either.
I've a got an Asp.Net site that is using Forms authentication, I've also got custom errors configured in the web.config. One of these is a special error page for 403's (access denied). My question is how do I get Forms authentication to work smarter?
I would like Forms authentication to send users to login page only if they are not authenticated. If they are I want it to defer to the custom error pages that i've defined in the web.config. This seems like something very basic, how can this be achieved?
[code]....
I'm working on a website with legacy Classic ASP pages (being converted to ASP.NET on an as needed basis) and new ASP.NET pages. Use of IIS 7 Integrated Pipeline has been very helpful with our configuration. For example, we were able to get forms authentication working auto-magically with the classic ASP pages simply by configuring the appropriate sections of the web.config file (i.e. no changes were required to the Classic ASP pages, for more info see this).
A colleague of mine believes that custom error pages, as specified in the web.config <customErrors> section, should also be auto-magically applied to the classic ASP pages, but for our website it only works for the ASP.NET pages. Nor have I been able to find any information describing the capability of applying custom error pages to Classic ASP with the IIS 7 integrated pipeline. Is it possible to apply custom error pages to Classic ASP pages per a web.config for an website running under IIS7 with integrated pipeline? If so, how?
How to show page Error msgs wen user tries to open the page , while tat page is under uploading on the sever?
View 1 RepliesFor certain parts of the site the allow inserting and updating of data we have some try / catch logic in place.. Now we would like to display a custom error page explaining what didnt happen. Instead of just a generic message that says error occurred. Here is 1 error that is generated due to Primary Key constraints, we woudl like to redirect them to our error.aspx page which is already setup and configured in the web.config but within that page display a more user friendly detail message of why they got the error. In the example below, we may want to say, "There was an error with the "Access Insert" please make sure that the values you entered on the previous page are unique" thats just an example, but gives an idea of what we are trying to do.
[Code]....
I have developed .net web application. When i change the page name(Which is not exist) in URL, it throws following error msg. I could not redirect the error page for respected error no(401.2..) Through IIS Admin and web config. Could anybody give appropriate solution. It is urgent. Access is denied. Description:
An error occurred while accessing the resources required to serve this request. The server may not be configured for access to the requested URL. Error message 401.2.: You do not have permission to view this directory or page using the credentials you supplied. Version Information: Microsoft .NET Framework Version:1.1.4322.2470; ASP.NET Version:1.1.4322.2470
I have created a custom error page to redirect whenever any error occurs. I made the following changes to the web.config file
<customErrors mode="On">
<error statusCode="403" redirect="~/Error.aspx" />
<error statusCode="404" redirect="~/Error.aspx" />
</customErrors>
Suppose my url is in the following way: http://MyTestSite/Posts/Post1.aspx
If I remove the .aspx at the end manually then it is not displaying my customm error page instead it is dispalying default 404 error page : Page cannot be found.
Also, if I give http://MyTestSite/Posts the same 404 error message is displaying. Even the Application_Error event in global.aspx is unable to handle this error.
How can I redirect these type of cases to my custom error Page? Do I need to make any changes in IIS default errors or can I able to acheive only using web.config?
I am trying to passing Exception info tpa custom error page that I have created, and I'm looking for the best way to do so.I ended up creating a session object on my Global.asax page, and I pass the error data to the session object during the Application_Error event, but it throws it's own exception prior to working.
[Code]....
I have also updated my web.config with my error page that I would like to pass session object data to:
[Code]....
i am using this code to reset all my textboxes and Dropdowmlists after the button is clicked:
void resetField(object myObj)
{
//RadioButton rl;
string temp = myObj.GetType().ToString();
switch (myObj.GetType().ToString())
{
case "System.Web.UI.WebControls.TextBox":
((TextBox)myObj).Text = "";
break;
case "System.Web.UI.WebControls.DropDownList":
((DropDownList)myObj).SelectedValue = "N/A";
break;
default:
break;
}
}
i have tested this code and it works great separately .. the only difference is on my project i have DIV, tables, TABs and ContentPlaceHolder. not sure if this can make this code not working.. i am not getting any error..but nothing is happening.
I need to extract meta-data of different files, as uploaded by the user.
For this I found out dsofile.dll from MS. Now the problem is that the version I've downloaded from
[URL] is working fine with Windows XP but giving run-time error in Windows 7 64-bit system. Finding more on the error I was getting I came to know that the dll would not work for 64 bit OS. I also downloaded 64-bit from [URL] but still am getting below run-time error:
Retrieving the COM class factory for component with CLSID {58968145-CF05-4341-995F-2EE093F6ABA3} failed due to the following error: 80040154.
I've two questions:
How can I solve this run-time error and from where will I get dll working in VS2008 Website on Windows 7 64-bit?
Is there any other way I can extract meta-data (all the attributes/properties other than exposed by System.IO.FileAttributes) of any file (could be doc, docx, xls, xlsx, jpg, pdf, txt, etc.) uploaded by the user?
I'm trying to set up custom errors for asp.net in webconfig/global.asax on Server 2003, IIS 6. Got it working find for .aspx pages but not for any htm or html pages. So I found the article describing how to open IIS manager, click configuration, copy path for .aspx extension and add one for .htm Did that.
Restarted website: Now I get the blank white page explaining there's a problem but not the 404 page not found
Restarted web services: same thing
Being A C++ programmer this is fairly new to me - I am working on a formview and have been facing a problem- The issue is simple - I want to display a success page after I insert a row successfully and a custom error page if the insertion fails (due to datatype or format mismatch with table in database).
To achieve this I am doing as follows -
1. Defining a custom error page in ASP.NET configuration tool (webconfig)
>> This page never works if I enter an incorrect format in formview. It would rather display the ugly page with Server Error information (for example) -
The string was not recognized as a valid DateTime. There is a unknown word starting at index 0.
question - Why my default page is not getting displayed? Is it because I am testing from same development machine or is it because the error page doesnt work for "Server Error" pages?
2. In the "iteminserted" event I am redirecting it to Response.Redirect("~/newitemconfirm.aspx")
>> If I do this, irrespective of whether the row insertion was successful or not, this confirmation page always gets displayed! I want it to be displayed only on successful insertion.
I need to send a Customized Error page for 503 Errors produced by my asp.net website. I have tried to simulate the condition by switching off the application pool (doesn't work) and by flooding my application with requests. Even though IIS sends me the default 503 error page, and even though I have tried setting a Custom URL in IIS and ASP.NET for this error code, it still returns me the default 503 error page.
View 3 RepliesI want to show a "Custom error page" when i type a non-existing .aspx or .html page in my application. I had followed the same steps in the link [URL] for the HTML pages also but it is working for .aspx pages but not working for .html pages if I enter any non-existing pages. I had added the path of "aspnet_isapi.dll" for the .html extension in the IIS. I also ensured that the check box "Verify file exists" is unchecked while adding the ".html" entry in the "configuration" of the "Home directory" of the website in the IIS but still it is not working.
View 1 Replieslast from the few days I am getting the following error in my production server("Index was outside the bounds of the array".).The follwoing error is coming in the webpartclass before adding the usercontrol to webpart.Strangely when the page is loading first time it is working fine with out any error.After 5,6 clicks in my page the above error is coming. It is working fine in my local machine and in development server.
The problem is only in production server.
base.CreateChildControls(); OTBTWorkshop = (UserControl)Page.LoadControl(@"~/_layouts/UserControls/tets/teest.ascx"); this.Controls.Add(OTBTWorkshop);