Configuration :: Temporary File Size Of Windows Reaches Around 10MB, Than The Application Blocks And The Reports Cannot Be Generated?
Jan 14, 2011
I have an application that is hosted in Server 2008 Standard Edition.It has more than 50 active users that uses it. The problem is that when Temporary file size of Windows (C:Windows emp) reaches around 10MB, than the application blocks and the reports cannot be generated.When we clear this temp folder and reset Refresh IIS, the application starts working again.Below is the code we use to generate reports:
I know this is a bit like how long is a piece of string question, but I'm wondering how big some peoples ASP.NET Temporary Files folder, gets. I wish to move this folder to a RAM DISK so I'm trying to see how big this should be set, to.
I have a visual studion 2010 solution with two projects
1 . A class libarary
[Code]....
2. A windows service application
[Code]....
The service application is used to convert .dbf files to xml. The convertion is done using the classlibary project wich is called by the windows service application. This class library project has some values hard coded. like the path to look for the .dbf file
I want to make these hard coded values changable. like moving them to an app.config file. To which project I have to add the app.config file (classlibary or windows service)? How can I use the value from configuration file in classlibrary ?
We have an ASP.NET application deployed on 2 Application servers with load balancer server. It is using INPROC state management. The ADO.NET connection pooling is enabled with 50 as minimum connections and 100 maximum connections.
In Load testing (using load testing tool) when the application reaches to 50 users no more users can connect (login) to application the TPS reaches zero. No errors are logged in application log related to application or database. The sessions are working fine.
I am hosting a solution with an outside company so getting them to troubleshoot or send me log files is not working.
Is there a way from code or Global.asax file that I can trap Memory usage from my web application when it reaches a certain amount? Then figure out what is using all the memory
I am trying to run an aspx file on my server windows 2003 with IIS 6.0. I get the following error. Server Error in '/' Application. Runtime Error Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
[Code]....
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
Then I found this solution online to handle the error if someone tries to upload file bigger than 10 MB
[Code]....
This works great on my local machine but when I try to run it from Production server , It still shows me the "Internet Expolrer cannot display webpage". I just want to display a nice message to user when He tries to upload file larger than 10 MB.
I running MS-Access desktop application, i would like to host it to web through ASP.Net (Only report purpose). regular data we keying in through desktop. is it possible for host through crystal report?
I have a simple windows form app that I need to get the file path for. I am placing a config file in the same directory and I need to be able to get the path to that file.
I have used Application.CommonAppDataPath but that returns the path with 1.0.0.0 at the end.
and Applicaiton.StartupPath but that returns the path with indebug at the end
Is there anyway to get the path to just the main file directory without anything appended to the end?
My operating system is Vista SP1 and vs.net 2008, I created windows application project but when I publish it , it display error
Failed to connect to 'http://localhost/project' with the following error: Unable to create the Web site 'http://localhost/project'. The Web server does not appear to have FrontPage Server Extensions installed.
I have built my site using VS.Net 2010 on my XP machine. I would like to deploy it to my server which is a Windows 2003 Server. I have tried to do it with FTP, but it keeps failing with the error that "Front Page Extensions are not installed on the web server". When I check the server the extensions were installed and I also checked IIS and the service for the extension is allowed.
Can someone point me to a step-by-step guide on how to deploy ASP.Net applications to a totally empty and brand new Windows 2003 Server?The server has ASP.Net and the .Net framework installed on it. IIS is up and running. I have created a new application pool.
I developed an application using VS2010 and now when i try to deploy it on windows XP maching running IIS 5.1 i get the database version error which says:
The database '<database file path>' cannot be opened because it is version 655. This server supports version 612 and earlier. A downgrade path is not supported.
<database file path> . Create is aborted.
An attempt to attach an auto-named database for file <database file path> failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
"My application (ASP.NET) writes certain files in folders on my servers. In IIS 6.0 I used to give write access to IUSR account so that IIS can write to the folder. Now what I see is my application pool runs under App Pool Identity account. That is good but users are able to create files in the folders without App Pool Identity user being given specific permission to do so.
i am trying to deploy the asp.net web application on windows 7 professional
i was getting error at <authentication mode="Windows"/>
if i commented the windows authentaction i get below error
Server Error in '/' Application. -------------------------------------------------------------------------------- Parser Error Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not load type 'crmpark.Login'.
Source Error:
Line 1: <%@ Page Language="vb" AutoEventWireup="false" CodeBehind="Login.aspx
I have created a webservice, which debugs fine with no errors, and published this on my localhost server for testing.
I have created a windows app which calls the webservice but am hitting problems as soon as I reach the point where the webservice tries to connect to its database.
The connectionstring is held within the web.config file of the webservice as
, and as I said before, this works perfectly when debugging the webservice application directly.
However, the windows application is not seeing the connection properly, if I use the statement as above I get a debug error stating that it is a NULL reference. If I change it to
I no longer get a debug error, but the connection is not made. On testing the above code it believes the name for connection 0 is "localSqlServer" and in both the web app and the webservice the error below is returned.
>>An attempt to attach an auto-named database for file \MyServerMyDirectoryMyProjectMyProjectApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
why the windows application see's the correct connection string code as null? Is there additional security I need to add for the web.config file to be accessible? Or does the connection strings need to be relicated within the app.config of the windows app?
Both applications are written in C# and I use Visual Studio 2010, ASP.Net version 4.0.30319
when i use CR v13 in my web site there is error message
Configuration Error Could not load file or assembly 'CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
[[COMException (0x80000220): Error in File C:WindowsTEMPSmall {287137BF-8E50-469F-B436-A0A385C7912A}.rpt:
Access to report file denied. Another program may be using it.i am getting this error while accessing the report in windows 7 we need to give write permission in IIS but how do i assign the write permission and to which file or folder or user do i need to assign it
I have a field in my dataset with type nvarchar(1000). when I link it to crystal reports, it converts it to a field of type string with length set to 100. As a result of that, the string in that field is being truncated on the report. How can I increase the string length to 1000? (I already checked the "Can grow" option).
I am running a web-site with simple .aspx files on a standalone workgroup Windows Server 2008 called 'Max'.I had assumed that the .aspx files were accessed by the 'Network Service' account.The application pool for the website is running with 'Network Service' as the process account.I was puzzled, since 'Network Service' had no permission on these files. So I added event level auditing to the files, and I was suprised to learn that the .aspx files were being accessed by an account called Max$ (ie the computer account).this correct ?Why is the Network Service account not being used ??
I am create a simple report in visual studio 2008 by using crystal report. when I am run locally its work fine but when i copy web site and run this report its show following error.
Server Error in '/xyz' Application.
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately. Parser Error Message: Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
