ELMAH Not Displaying Original Error Page In MVC3
Feb 4, 2011
[URL] Using the above url as a reference, I can see ELMAH should display the Original ASP.NET error page when the error originates from the View. I have created the following view to generate an error, but the only exception views are Raw/Source data in XML or in JSON.
@{
ViewBag.Title = "ViewError";
}
<h2>View Error</h2>
@{
throw new NullReferenceException();
}
Is it possible to view the Original ASP.NET error page in MVC3?
View 2 Replies
Similar Messages:
Mar 19, 2011
I want to display an image in its original size, not depending on the image size on the page. I use IMAGE from the toolbox.
how can I display an image without stretching it to the image size on the form?
I use VS2010 Express
View 4 Replies
Mar 29, 2010
I am using the exception catching procedure which is the module to track the errors and it write the error description in a log file in the server.I want to display the error details in a common Error page which is having a multi-line textbox from the common function in the module.Is it possible to do that.If possible,How can I do that....
Try
;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;
Catch ex as exception
CreateLogFile(Ex)
End Try
The above description is the error catching portion from the code In the module I have written the CreateLogFile function which write the log file. I want to display the Error Page after writing the log file which should contain the error details....
View 2 Replies
Apr 14, 2010
So, have an ASP 3.5 site built using ELMAH.
It runs fine under IIS 5.1, I can see all the error pages, etc.
Set up the site on another machine running IIS 7.5.
Now when I go to my /admin/elmah.axd page, i see a 404 error from IIS 7.5.
View 1 Replies
Feb 24, 2011
First I found that you can catch it and log it inside a catch, but this doesn't send an email.
Then I found out about using the Error Signal class. That worked, however what wasn't apparent from reading, is that it treats the error like normal, so when I signal the error it goes to the custom error page still, I don't want that to happen. What I want to do is catch that error, log it, send the email, but stay on the page the error happened so I can provide special feedback. I do not want it go to the custom error page.
EDIT: This is what I have and it redirects me to the custom error page.
Try
smtpClient.Send(mailMessage)
Catch smtpEx As SmtpException
errorSignal.FromCurrentContext().Raise(smtpEx)
Catch ex As Exception
errorSignal.FromCurrentContext().Raise(ex)
End Try
Edit: Posting my web.config sections that involve Elmah (besides the connection string hah)
And there is nothing in my Global.asax file involving Elmah.
<configSections>
<sectionGroup name="elmah">
<section name="security" requirePermission="false" type="Elmah.SecuritySectionHandler, Elmah" />
<section name="errorLog" requirePermission="false" type="Elmah.ErrorLogSectionHandler, Elmah" />
<section name="errorMail" requirePermission="false" type="Elmah.ErrorMailSectionHandler, Elmah" />
<section name="errorFilter" requirePermission="false" type="Elmah.ErrorFilterSectionHandler, Elmah" />
</sectionGroup>
</configSections>
<elmah>
<security allowRemoteAccess="1" />
<errorLog type="Elmah.SqlErrorLog, Elmah" connectionStringName="Elmah.Sql" applicationName="Web Main" />
<errorMail from="xxx" to="xxx" cc="xxx" subject="main website error" async="true" smtpPort="25" smtpServer="xxx" userName="xxx" password="xxx" />
<errorFilter>
<test>
<and>
<equal binding="HttpStatusCode" value="404" type="Int32" />
<regex binding="FilterSourceType.Name" pattern="mail" />
</and>
</test>
</errorFilter>
</elmah>
<httpHandlers>
<add verb="POST,GET,HEAD" path="errors/admin/elmah.axd" type="Elmah.ErrorLogPageFactory, Elmah" />
</httpHandlers>
<httpModules>
<add name="ErrorLog" type="Elmah.ErrorLogModule, Elmah" />
<add name="ErrorMail" type="Elmah.ErrorMailModule, Elmah" />
<add name="ErrorFilter" type="Elmah.ErrorFilterModule, Elmah" />
</httpModules>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true">
<add name="ErrorLog" type="Elmah.ErrorLogModule, Elmah" preCondition="managedHandler" />
<add name="ErrorFilter" type="Elmah.ErrorFilterModule, Elmah" preCondition="managedHandler" />
<add name="ErrorMail" type="Elmah.ErrorMailModule, Elmah" preCondition="managedHandler" />
</modules>
<handlers>
<add name="Elmah" path="elmah/admin/elmah.axd" verb="POST,GET,HEAD" type="Elmah.ErrorLogPageFactory, Elmah" preCondition="integratedMode" />
</handlers>
<httpErrors>
<remove statusCode="404" subStatusCode="-1" />
<remove statusCode="500" subStatusCode="-1" />
<error statusCode="500" prefixLanguageFilePath="" path="/errors/error.asp" responseMode="ExecuteURL" />
<error statusCode="404" prefixLanguageFilePath="" path="/global/404.aspx" responseMode="ExecuteURL" />
</httpErrors>
</system.webServer>
<location path="errors/admin/elmah.axd">
<system.web>
<authorization>
<deny users="?" />
</authorization>
</system.web>
</location>
View 2 Replies
Feb 18, 2011
i want to display the errors in a seprate page so in catch block i redirected the execption to that page, in all the pages it's working fine, but if get any error in my db retuning datas means, im' getting redirect loop in browers itself not redirecting to the page i needed. how to fix this??
View 5 Replies
Jun 14, 2010
using elmah i can save error log on database,email,xml .They are individually works well .I want to work in together.Suppose in my config file i can can active server log than i can not active xml log but i want to work on both .How to do.
<elmah>
<!-- Change this to 1 to allow remote access. If you do, be sure to lock down the elmah.axd file! -->
<security allowRemoteAccess="1" />
[code]...
if i cative server log on tag it's work well than i need to deactivate rest of log storage process like : xml,mail-notification etc.If i active Xml log than it's work well than i need to deactivate rest of them .But if i active both of them then it does not work**.I want they active on same time.How to active them in the same time.if i active **mail log it does not work .I don't know why it's not work.**1) How to active Server log and Xml log on same time.2) How to active email log with 1) and individually why it's not work?** I want error log will save on database, save on specified folder as xml formate, and also want to send email notification how to active them in the same time.
View 1 Replies
Jul 21, 2010
Can any body give me code to impement ELMAH error handling for my asp.net mvc application.. I need to know step by step process to implemnt?
View 2 Replies
Oct 15, 2010
I used the NuPack tool to add Elmah to a site on my developer machine. This worked like a charm, but when I send a request to the elmah.axd page all I get in return is 500 - Internal server error.
My code setup:
Visual Studio 2010
Site built on top of EPiServer 4.62B
Running on .NET Framework 2 (because of EPiServer)
My IIS setup:
IIS 7.5
Classic .NET AppPool (because of EPiServer)
My computer:
running Windows 7 32bit (because of EPiServer)
ELMAH content in web.config:
<sectionGroup name="elmah">
<section name="security" requirePermission="false" type="Elmah.SecuritySectionHandler, Elmah" />
<section name="errorLog" requirePermission="false" type="Elmah.ErrorLogSectionHandler, Elmah" />
[code]...
View 3 Replies
Apr 21, 2010
I want to add my own session variable to elmah error log table and display it. I already have modified the source code and added the new fields to Error.cs and other fields but I don't know but when I assign an HttpContext.Current.Session["MyVar"].tostring() value to my field in the constructor it stops logging exceptions and does not log any exception. I just need to get the value of the session variable is there other way for this ? I read a post which he added fields for the email but it does not say where exactly should I get the session value. I also read that Session and Cookies ar e logged by default by Elmah but I dont know how to access them.
View 2 Replies
Oct 27, 2010
I am showing Custom Error in my page.. if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page. Please I am attaching the Screen shot. how to show the Error page on entire page if something happend in any where submaster or other page.. Here is the code that I am using in web config file to show custom Error page..
<customErrors mode="On" defaultRedirect="~/Home/Error">
<error statusCode="403" redirect="~/Home/Error" />
<error statusCode="404" redirect="~/Home/Error" />
</customErrors>
master page I have all the js files and Css files links and I have submaster page for mainmaster page.. sub master page have three tabs each tab has grid control.if something went wrong I can able to show the Custom Error page but its showing me in submaster page.. not in main master page.....but if something hapend any where I need to show CustoM Error page in main master page..
View 1 Replies
Sep 23, 2010
For certain parts of the site the allow inserting and updating of data we have some try / catch logic in place.. Now we would like to display a custom error page explaining what didnt happen. Instead of just a generic message that says error occurred. Here is 1 error that is generated due to Primary Key constraints, we woudl like to redirect them to our error.aspx page which is already setup and configured in the web.config but within that page display a more user friendly detail message of why they got the error. In the example below, we may want to say, "There was an error with the "Access Insert" please make sure that the values you entered on the previous page are unique" thats just an example, but gives an idea of what we are trying to do.
[Code]....
View 4 Replies
Feb 16, 2011
I am trying to handle errorPlacement JQuery Validate plugin in ASP.NET MVC 3 Project with Unobtrusive validation provided by Microsoft. I am never able to hit the errorPlacement function and I am not sure what am I doing wrong. I am providing the code for Model/View/Controller below. Please let me know what am I doing wrong? View
<%@ Page Language="C#" Inherits="System.Web.Mvc.ViewPage<Project.Models.SampleModel>" %>
<!DOCTYPE html>
<html>
[code]...
View 2 Replies
Jan 18, 2011
I'm just started with MVC3 and have the following error when I want to run my application :
An error occurred when trying to create a controller of type 'SignInMVC3.MenuController'. Make sure that the controller has a parameterless public constructor.
This is my MenuModel code
[Code]....
This is my MenuController
[Code]....
This is the code of my LoadMenu.asx (view usercontrol)
[Code]....
And this code is in the site.master page where I want to render the menu
[Code]....
View 7 Replies
Mar 2, 2011
, i created a html helper in mvc3 project with razor view
[Code]....
and i am using this in view but error is occuring.
but it works in aspx view engine and mvc2.
View 10 Replies
Feb 1, 2011
I need to build a search page and a results page for an MVC3 app.
View 2 Replies
Nov 23, 2010
im getting the following exception for use into a master page the helper html.renderpartial(). This works on mvc views that uses this master page, but im trying to execute an old aspx webform page that uses the same masterpage. And here comes following exception:A ViewMasterPage can be used only with content pages that derive from ViewPage or ViewPage.This is the code of my master page:
<body>
<%Html.RenderPartial("PartialView"); %>
<div style="background-color:Aqua;">
<asp:ContentPlaceHolder ID="MainContent" runat="server">
</asp:ContentPlaceHolder>
</div>
</body>
I would like to render some partialviews on my master page. Is it possible?
View 1 Replies
Nov 18, 2010
What is the best way to pass data to the layout page? Each one of my pages has a different model, but I need to pass consistant data to the layout page so I can show the current app they are on and the array of menu options that get passed into a method that builds the menu.
View 2 Replies
Oct 26, 2010
In order to get Database.Open("sdfsdf"); to work in one of my MVC3 .cshtml pages I had to add a using statement at the top of the page.@using WebMatrix.Data.I added it to the Web.Config file under the <pages><namespaces> section and it didn't work.
1. Do .cshtml pages not respect that section in the web.config? If not
2. Do we need to add @using statements in every page? Or is there a better way?
I can't get helpers like @LinkShare.GetHtml and @Gravatar.GetHtml working despite have references to:
System.Web.WebPages
System.Web.Helpers
And adding @using statements.
3. What am I missing in order to get the helpers working in my MVC3 project?
View 3 Replies
Mar 9, 2011
I have an aspx web page that renders correctly. When converted to razor, it does not. Here is a simplified example (stripped of all extraneous stuff).
aspx:
<asp:Content ID="indexContent" ContentPlaceHolderID="ToolContent" runat="server">
<% string test = "<div><b>Tag Test</b></div>"; %>
<h2><%= test %></h2>
</asp:Content>
razor:
@section ToolContent {
@{ string test = "<div><b>Tag Test</b></div>"; }
<h2>@test</h2>
}
The aspx renders as expected. The razor just displays the content of "test" (<div><b>Tag Test</b></div>) in the header tag.
I assume that my understanding of razor is flawed. If someone could enlighten me and/or show me a solution/work around.
View 1 Replies
Feb 21, 2011
I have an .aspx page as my custom 404 page on a site set up on IIS 7. I need to retrieve the original URL that the user was trying to access in order to do some processing on the 404 page. The trick is that I need to specifically handle 404's that do not contain a .aspx extension (e.g http://mysite/testurl), which do not get routed through ASP.NET's custom errors section. I can configure IIS to point to my custom 404, but at that point I do not know how to get my original URL?
View 1 Replies
Feb 8, 2010
I have an edit page which is used from different sources. After editing I would like to redirect user to original page. Earlier I used ID (given as a parameter) and Action (hard-coded) to redirect user to certain page, but problems occurs when many different pages can access the same edit page.
Should I store complete URL and pass it as a parameter? Are there any known issues with that (string length etc.)?
View 2 Replies
Feb 15, 2011
My Original Issue here:Help! I've got repository access in my MVC master page! Refactor time!What originated as a re factoring job to improve performance has revealed new issues. If I should keep this in my original question - feel free to delete this one, and rename the old one to something more relevant. I'm using an ActionFilter applied to a base controller to load some user-customized settings. My issue is that I save these settings in the filterContext.Controller.ViewData object but its coming through as null on my master page. Here is the relevant code:
Action Filter
[AttributeUsage(AttributeTargets.Class, AllowMultiple = false)]
public class StoreSettingsActionFilter : ActionFilterAttribute
[code]...
View 1 Replies
Apr 21, 2010
ASP.Net Page layout is not displaying properly in QA machine but is displaying correctly in Dev Machine. What could be the issue? We are using ASP.Net 2.0
View 1 Replies
May 7, 2015
I have a data driven asp.net website with frames on the top, left, right and center screen. If a page generates an error on any of the frames, I want to redirect the whole site back to the Default.aspx. Currently, when a frame page errors in one of the frames, that frame gets the error pages. Site is URL.... Is this something that can be handled?
View 1 Replies
