Displaying Error Page Based On The Error Exception?

Mar 29, 2010

I am using the exception catching procedure which is the module to track the errors and it write the error description in a log file in the server.I want to display the error details in a common Error page which is having a multi-line textbox from the common function in the module.Is it possible to do that.If possible,How can I do that....

Try

;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;

Catch ex as exception
CreateLogFile(Ex)
End Try

The above description is the error catching portion from the code In the module I have written the CreateLogFile function which write the log file. I want to display the Error Page after writing the log file which should contain the error details....

View 2 Replies


Similar Messages:

Web Forms :: Display Complete Exception Details And Error Message On Custom Error Page

Jul 2, 2012

I am trying to handle the unhandled exceptions in my project.I tried with this following code in my web.config filebut it is not at all redirecting to an error page which i have created instead of that it is throwing an exception in my code itselef. How to print the error description over therein my custom error page.

---------------------------------------------------------------------------------------------------
<sys.web>......<customErrors mode="On" defaultRedirect="~/Error.aspx"></customErrors>...</sys.web>
---------------------------------------------------------------------------------------------------

And even i tried in Global.asax page in Application_Error() method like below

 Exception ex = Server.GetLastError();Response.Redirect("~/Error.aspx?errmsg="+ex.message);Server.ClearError();

And in my Error.aspx.cs page i have placed a label and i have written code like this

protected void Page_Load(object sender, EventArgs e)         {
         Label1.Text=Request["errmsg"];
      }

But it is not getting redirected my error page and not displaying anything on it.

View 1 Replies

Catch Error Not Displaying In Error Page

Feb 18, 2011

i want to display the errors in a seprate page so in catch block i redirected the execption to that page, in all the pages it's working fine, but if get any error in my db retuning datas means, im' getting redirect loop in browers itself not redirecting to the page i needed. how to fix this??

View 5 Replies

C# - How To Access The Source Error, Source File And Line Number Of An Exception To Use In A Custom Error Page

Jun 18, 2010

Basically I want to take the following:And make it match the styling of the rest of the application.I am creating a custom error page in my C# based project and I want it to be able to show the same information that is displayed in the ASP.NET default error page. From fiddling with reflector I can see that this is generated through HttpException.GetHtmlErrorMessage() but when I try to use this in my exception it returns null.

View 3 Replies

Web Forms :: Page Error Validation Exception?

Nov 8, 2010

i would very much like to capture certain dal/bll exceptions in my page_error code and turn them into validation errors so they should show up in the validationsummarythis is the code im trying now

[Code]....

the logic is simply to catch only exceptions of type ArgumentException, otherwise it should bubble up (to global.asax handling)what hapens is that after this code block runs, the exception still exists in the system, so it always bubbles up to the global.asaxit there any way to tell asp.net that "its ok, i took care of the exception, just continue with the page"?i tried server.clearerror and context.clearerror but these methods stop the whole page and return a blank empty pagethank you all for your time and patiencep.s. if u have any other ideas 4 improving this code,

View 9 Replies

Web Forms :: How To Pass Exception Message To Custom Error Page

Apr 12, 2010

I am trying to passing Exception info tpa custom error page that I have created, and I'm looking for the best way to do so.I ended up creating a session object on my Global.asax page, and I pass the error data to the session object during the Application_Error event, but it throws it's own exception prior to working.

[Code]....

I have also updated my web.config with my error page that I would like to pass session object data to:

[Code]....

View 2 Replies

Web Forms :: Displaying Custom Error Page

Sep 23, 2010

For certain parts of the site the allow inserting and updating of data we have some try / catch logic in place.. Now we would like to display a custom error page explaining what didnt happen. Instead of just a generic message that says error occurred. Here is 1 error that is generated due to Primary Key constraints, we woudl like to redirect them to our error.aspx page which is already setup and configured in the web.config but within that page display a more user friendly detail message of why they got the error. In the example below, we may want to say, "There was an error with the "Access Insert" please make sure that the values you entered on the previous page are unique" thats just an example, but gives an idea of what we are trying to do.

[Code]....

View 4 Replies

Displaying Custom Error Page From A Nested Master Page Using Mvc

Oct 27, 2010

I am showing Custom Error in my page.. if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page. Please I am attaching the Screen shot. how to show the Error page on entire page if something happend in any where submaster or other page.. Here is the code that I am using in web config file to show custom Error page..

<customErrors mode="On" defaultRedirect="~/Home/Error">
<error statusCode="403" redirect="~/Home/Error" />
<error statusCode="404" redirect="~/Home/Error" />
</customErrors>

master page I have all the js files and Css files links and I have submaster page for mainmaster page.. sub master page have three tabs each tab has grid control.if something went wrong I can able to show the Custom Error page but its showing me in submaster page.. not in main master page.....but if something hapend any where I need to show CustoM Error page in main master page..

View 1 Replies

ELMAH Not Displaying Original Error Page In MVC3

Feb 4, 2011

[URL] Using the above url as a reference, I can see ELMAH should display the Original ASP.NET error page when the error originates from the View. I have created the following view to generate an error, but the only exception views are Raw/Source data in XML or in JSON.

@{
ViewBag.Title = "ViewError";
}
<h2>View Error</h2>
@{
throw new NullReferenceException();
}

Is it possible to view the Original ASP.NET error page in MVC3?

View 2 Replies

AJAX :: Accordion Control Showing Error - Error Rendering Control - AsssAn Unhandled Exception?

Feb 18, 2011

I am new to ASP.NET and AJAX

I want to use Accordion control in my page

but when i try to add that controlit is showing the error.

My code is

[code]....

View 1 Replies

Web Forms :: Redirect Parent Page To Error Page If Error Occurs In IFRAME Child Page

May 7, 2015

I have a data driven asp.net website with frames on the top, left, right and center screen.  If a page generates an error on any of the frames, I want to redirect the whole site back to the Default.aspx.  Currently, when a frame page errors in one of the frames, that frame gets the error pages.  Site is URL....  Is this something that can be handled?

View 1 Replies

State Management :: Error On Page And "Unknown Error - Code 0" In Error Message?

Dec 6, 2010

I have a serious problem with "Error on Page". The error message points to line number 939, char 13. In my code behind (C#) in line number 939 is only an obsolete method found which is no longer called. The aspx file has only 339 lines. What the heck is line number 939?The Webapplication allows a special user group to change some group memberships for members of another user group in Active Directory. The App handles 3internal DataViews derived from corresponding DataTables as DataSource for 3 GridViews and some other internal lists with objects (List<obj>).

It uses windows authentication to get current users credentials and his membership in the "Operators" group. This credentials will be passed-through to allow the process managing group memberships in active directory.After starting the App in browser it seems to work fine. But after an indeterminated time it doesn't longer respond. After each click on buttons (or link buttons) you only can see the message "Error on Page" in the browsers status bar below.I played with session timeout, storing the DataTables in session variables, without success.

Last week I found this article here: [URL]" and I addedEnableEventValidation="false" ViewStateEncryptionMode="Never"
to Page declaration. However, at some point the the server does not respond. Each time the worker process on webserver recycles it seems the application turn to wrong state. Might be important: All controls including GridViews are embedded in an AJAX UpdatePanel. How to get a better error message? Debugging is enabled and Custom Error handling On, Off or Remote Only brings the same result as described.

View 3 Replies

Forms Data Controls :: Add An Update Command To Page And Run The Page Getting Error Message - Server Error In '/MYApplication?

Feb 22, 2010

When I add an update command to my page and run the page I get this error message

Server Error in '/MYApplication.

Incorrect syntax near '-'.Must declare the scalar variable "@recnum".

Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near '-'.Must declare the scalar variable "@recnum".

Source Error:

[Code]....

Stack Trace: [Code]....

Version Information: Microsoft .NET Framework Version:2.0.50727.3082; ASP.NET Version:2.0.50727.3082

Here is my code

<asp:SqlDataSource
ID="SqlDataSource1"
runat="server"[code]....

View 4 Replies

MVC :: Error In Subview Master Page Not Show The Custom Error Page On Entire Page ?

Oct 28, 2010

I am showing Custom Error in my page.if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page.I am attching the Screen shot.Can any body help me out how to show the Error page on entire page if something happend in any where submaster or other page.Here is the code that I am using in web config file to show custom Error page..

[CODE]...

Here I know the issue what's going on.This issue is occurring because i am using AJAX to partially load the contents of the tabs after the initial page load so the error is occurring AFTER my master page has been loaded.What I need to do is provide a javascript function to handle the error after the ajax call has returned and redirect to the error page.How to write this Javascript and where Do I need to write this?

View 4 Replies

Web Forms :: Error On Clicking Link-Cant Redirect To Target Page-Error Page Is Shown?

Nov 30, 2010

my C# console appliccation code is shown below :-

[Code]....

In my application a mail message send to particular recipeeient with msg body contains a hyper link.. when the recipent click on this link,it will redirect to another form(InternalForm.aspx)... bt when clicking the link error is occured,whuy its happening???? In InternalForm.aspx,page load portion access the link content(badgeno).. page load portion code of InternalForm.aspx is shown below:-

[Code]....

View 7 Replies

Get A Custom Error Page To Mail The Error Message / Generate A Custom Error Page With The Error Message

Feb 7, 2011

I was wondering if someone could point me in the right direction:

How do I generate a custom error page with the error message and get it to mail me that error message?

Is there a good tutorial out there that someone could point me 2.

View 4 Replies

Web Forms :: Session_Start Executes Again After An Error Occurs (when Going To Custom Error Page)

Mar 7, 2011

I'm having a wicked time trying to redirect the different error scenarios to a custom error page. Basically, I have put some code in Application_Error in global.asax, and done the necessary web.config settings to use Custom Errors.

In global.asax on Application_Error, I stored the Server.GetLastError in Session. The reason I have to store it in Session is because (as far as I know) you lose the exception when using "ResponseRedirect". And the reason I have to use ResponseRedirect is because I am using an UpdatePanel with AJAX calls, and any exception during the AJAX call shows up as a JavaScript error, and doesn't get handled using the custom error page (see this post).

void Application_Error(object sender, EventArgs e){ ////must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { Session["LastException"] = Server.GetLastError(); } else { // (I think this happens when there are compile-time errors) Server.Transfer("~/Oops.aspx"); }}void Session_Start(object sender, EventArgs e){ //must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { //initialize the session (http://forums.asp.net/t/1405077.aspx) Session["LastException"] = ""; }}

View 3 Replies

MVC :: Display Friendly Error Message On Page Without Redirecting To Error.aspx

Mar 8, 2011

All the examples and websites i have looked at redirect a user to the error.aspx page when an error occurs. How do you just display a friendly error message on the page the user is viewing saying something like "Sorry unable to do whatever" I've tried using a try catch block on my class that executes a stored procedure and put another try catch on the controller, but this does not work and i still get the default error message (System.InvalidOperationException was unhandled by user code) My code is below:

[Code]....

So how can i just return ViewData["SqlError"] message in page.

View 7 Replies

Web Forms :: Want To Redirect To Error.aspx Page If Runtime Error Occurs?

Feb 4, 2010

I want to redirect to Error.aspx page if runtime error occurs.How to acomplish this task.

View 8 Replies

While Trying To Run The Login Page Received Error:Server Error In '/' Application?

Oct 2, 2010

created website in VS2008 with createuser and login page.I was able to run the createuser page, but while trying to run the login page i received error:Server Error in '/' application.resources not found.

View 1 Replies

Visual Studio :: Getting Error - 'page Load Error, Try Again' / How To Fix It

Jan 26, 2010

When I run a web program from visual studio .net 2008 then it output is displayed in Mozilla Firefox and a error is appear 'page load error, try again'. If I copy the url and paste it to the Internet explorer then it runs. How can I recover this problem and set Internet explorer as default browser for Visual studio .net 2008

View 3 Replies

Error On The Page When Making On Line But There Is No Error On Local

May 13, 2010

I am finding the following error on firefox:-

XML Parsing Error: no element foundLocation: [URL] Number 1, Column 1:where as on local there is no error the code contains: protected void Button1_Click(object sender, EventArgs e) { try { SqlConnection con = new SqlConnection(WebConfigurationManager.ConnectionStrings["PintooConnection"].ConnectionString); DataSet Ds = new DataSet(); SqlDataAdapter Da = new SqlDataAdapter("Select * from Emails", con); Da.Fill(Ds); for (int i = 0; i < Ds.Tables[0].Rows.Count; i++) { Label1.Text = Label1.Text + i.ToString() ++ Ds.Tables[0].Rows[i][1].ToString() + " <br />"; SqlConnection test = new SqlConnection(WebConfigurationManager.ConnectionStrings["PintooConnection"].ConnectionString); string qry = "Insert into test values ('" + Ds.Tables[0].Rows[i][1].ToString() + "','" + Ds.Tables[0].Rows[i][2].ToString() + "','" + Ds.Tables[0].Rows[i][3].ToString() + "','" + Ds.Tables[0].Rows[i][4].ToString() + "','" + Convert.ToDateTime(Ds.Tables[0].Rows[i][5].ToString()) + "')"; SqlCommand cmd = new SqlCommand(qry, con); con.Open(); cmd.ExecuteNonQuery(); con.Close(); cmd.Dispose(); } } catch (Exception ex) { Label1.Text = ex.ToString(); } }aspx code is here:
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="testforconnection.aspx.cs" Inherits="Admin_testforconnection" %><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" ><html xmlns=[URL]><head runat="server"> <title></title></head><body> <form id="form1" runat="server"> <div> <asp:Button ID="Button1" runat="server" Text="Button" onclick="Button1_Click" /> </div> <asp:Label ID="Label1" runat="server" Text=""></asp:Label> </form></body></html>I have also tried this<![CDATA[<% Response.ContentType = "text/HTML";>but the problem is same.</textarea></p>
<input type='hidden' name='ID[1]' value='178042' />
<input type='hidden' name='URL[1]' value=[URL] />
<input type='hidden' name='CAT[1]' value='ASP.NET' />
<input type='hidden' name='BOARD[1]' value='stackoverflow' />
<input type='hidden' name='P_DATE[1]' value='Jun 18 10 at 4:43' />
<input type='hidden' name='RANDOM[1]' value='oP15QfJ0c' />
<input type='hidden' name='REPLIES[1]' value='3' />
<input type='hidden' name='USER[1]' value='aziz' />
<p><input class=subject type='text' size='90' name='SUBJECT[1]' value='c# - How do you access the Source Error, Source File and Line Number of an exception to use in a custom error page?' /><select name='INDEXED[1]'><option value='1' selected>UPDATE</option><option value='2'>DELETE</option></select>Jun 18 10 at 4:43 - Replies: 3 CAT: ASP.NET<a target=_blank href="[URL]>View</a></p>
<p> <textarea rows=10 cols=100 name='POST[1]' onfocus='setSelRange(this, 0, 0)'/>Basically I want to take the following:

And make it match the styling of the rest of the application. I am creating a custom error page in my C# based project and I want it to be able to show the same information that is displayed in the ASP.NET default error page. From fiddling with reflector I can see that this is generated through HttpException.GetHtmlErrorMessage() but when I try to use this in my exception it returns null.

</textarea></p>.......................................

View 4 Replies

AJAX :: Exception Error With Slideshow Service

Feb 1, 2010

I have the following problem with a slideshow in Ajax. Hope I have put it in the right Ajax forum. Some info: I do use MS Access and in the 'autos table' i do have the following fields:

field 1: nummer (text field) - this is the name of the image
field 2: cat (integer) - this is the category of the cars
field 3: naam (text field) - this is the name of the car
field 4: model (text field - this is the model of the car

In my masterpage i do have a menu where you can make the choice of a certain category of cars. This is done by a call to: slideshow.aspx?cat=100 In Slideshow.aspx a panel is setup and also buttons to manipulate the found images. Also the AjaxToolkit:Slideshowextender is defined as follows:

<ajaxToolkit:SlideShowExtender ID="SlideShowExtender1" runat="server"
TargetControlID="Image1"
SlideShowServicePath="slideservice.asmx"
SlideShowServiceMethod="Getslides"
AutoPlay="true"
ImageTitleLabelID="Name"
ImageDescriptionLabelID="Desc"
NextButtonID="NextButton"
PlayButtonID="PlayButton"
PlayButtonText="Play"
StopButtonText="Stop"
PreviousButtonID="PrevButton"
PlayInterval="4000"
Loop="true"
ContextKey="catid" />
As you can see the contactkey is also defined.
Inside the codebehind of slideshow.aspx.vb their is a sub defined:
Partial Class Slideshow
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As EventArgs) Handles Me.Load
SlideShowExtender1.ContextKey = Request.QueryString("catid")
End Sub
End Class
The call from slideshow.aspx is to a slideservice.asmx which contains:
<%@ WebService Language="VB" CodeBehind="~/App_Code/SlideService.vb" %>
Here we call slideservice.vb.
The coding of the slideservice.vb file is:
Imports System.Web
Imports System.Web.Services
Imports System.Web.Services.Protocols
Imports System.Data.OleDb
Imports System.Web.UI.Page
<WebService(Namespace:="http://vancouver.com/")> _
<WebServiceBinding(ConformsTo:=WsiProfiles.BasicProfile1_1)> _
<Global.Microsoft.VisualBasic.CompilerServices.DesignerGenerated()> _
<System.Web.Script.Services.ScriptService()> _
Public Class SlideService
Inherits System.Web.Services.WebService
<WebMethod()> _
Public Function GetSlides(ByVal contextKey As String) As AjaxControlToolkit.Slide()
Dim strconn As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=|DataDirectory|Vancouver.mdb"
Dim cn As New OleDbConnection(strconn)
Dim SQLStr As String
SQLStr = "SELECT nummer, naam, model FROM Autos WHERE ((Autos.cat) = @catid)"
Try
cn.Open()
Dim cmd As New OleDbCommand(SQLStr, cn)
Dim sCatid As String = ""
' Give the value to sCatid from contextkey
If sCatid.Trim().Length = 0 Then sCatid = contextKey
cmd.Parameters.AddWithValue("@catid", sCatid)
Dim thisReader As OleDbDataReader = cmd.ExecuteReader()
Dim photoCounter As Integer
While thisReader.Read()
photoCounter = photoCounter + 1
End While
If (photoCounter > 0) Then
'we now know how many pictures there are in this category of the database
Dim MySlides(photoCounter - 1) As AjaxControlToolkit.Slide
'set up the command string
Dim photoLookupCmd As New OleDbCommand(SQLStr, cn)
'and add the parameters to it for the category
photoLookupCmd.Parameters.AddWithValue("@catid", sCatid)
thisReader = photoLookupCmd.ExecuteReader()
Dim i As Integer
For i = 0 To photoCounter - 1
thisReader.Read()
Dim number As String = thisReader.GetString(0)
Dim name As String = thisReader.GetString(1) + " - " + thisReader.GetString(2)
MySlides(i) = New AjaxControlToolkit.Slide(("pictures" + number + ".jpg"), name, "")
Next
thisReader.Close()
Return MySlides
Else
Dim MySlides(0) As AjaxControlToolkit.Slide
MySlides(0) = New AjaxControlToolkit.Slide("pictures99999.jpg", "sorry - not available", "pls. mail us to report")
thisReader.Close()
Return MySlides
End If
Catch x As Exception
Dim MySlides(0) As AjaxControlToolkit.Slide
MySlides(0) = New AjaxControlToolkit.Slide("pictures99999.jpg", "Exception error", "pls. mail us to report")
Return MySlides
Finally
cn.Close()
End Try
End Function
End Class

When i run the code i will get an exception error and when following the code in debug mode i do see that inside the first loop in FOR i = 0 to photocounter - 1 : The first loop gets the right info from the database inside Myslide(1) fields. Going into the second loop i will get after dim name as string .....

the program goes to catch x as exception. I did see that number was found correctly during the previuous line. During an other debug session i noticed that the Parameter.item has the following error (which I do not understand), saying: Overload resolution failed because no accessible 'Item´ accepts this number of arguments.

View 1 Replies

Event Causing Error But Can't Catch Exception

Apr 22, 2010

A developer has created a custom control in ASP.NET using VB.NET. The custom control uses a repeater. In certain scenarios, the rpt_ItemDataBound event is encountering a data error. My goal is rather than having the user see the yellow screen of death, give the user a friendlier error explaining exactly what the data error is. I figured I would be able to use a Try/Catch block as shown below throw the exception, however, it appears that the event has nowhere to be thrown to and stops executing at the "End Try" line.

Protected Sub rpt_ItemDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.RepeaterItemEventArgs) Handles rpt1.ItemDataBound, rpt2.ItemDataBound
Try
ProcessBadData...
Catch ex As Exception
Throw ex
End Try
End Sub

In VB.NET, I can find where the repeater's DataSource is being set, however, I can not find a DataBind event. how I can capture the exception in this ASCX control so I can report it to the user? Edit: The stack trace looks like this. There is another repeater within the repeater that is actually causing the error (rptOther) and I'm able to catch the error, but I can only throw it to the rpt_ItemDataBound. I can't figure out how rpt_ItemDataBound is getting called without a DataBind event.

at Company.WebForms.Control.rptOther_ItemDataBound(Object sender, RepeaterItemEventArgs e)
at System.Web.UI.WebControls.Repeater.OnItemDataBound(RepeaterItemEventArgs e)
at System.Web.UI.WebControls.Repeater.CreateItem(Int32 itemIndex, ListItemType itemType, Boolean dataBind, Object dataItem)
at System.Web.UI.WebControls.Repeater.CreateControlHierarchy(Boolean useDataSource)
at System.Web.UI.WebControls.Repeater.OnDataBinding(EventArgs e)
at System.Web.UI.WebControls.Repeater.DataBind()
at Company.WebForms.Control.rpt_ItemDataBound(Object sender, RepeaterItemEventArgs e)

View 1 Replies

Configuration :: Exception Handling And Webresource.axd Error?

Apr 30, 2010

I have introduced site wide exception handling on my site to catch unexpected errors. The event handler sends a message to me when such an exception occurs. But the problem is that any clicks on my site will cause an exception to be thrown with the message: "This is an invalid webresource request."

I googled for an answer and only found a couple of references to 1. setting a fixed machinekey (which for some reason didn't work for me, I got an error saying that the virtual directory wasn't set in IIS, and as far as I know I'm not using IIS at all, I'm using the local development environment and then deploy to a web host) or 2. using a robots.txt file to stop robots from accessing the axd files, but that doesn't help either because it's not robots that cause the problem, anyone clicking around on the page will cause this error. how to solve this problem properly? For now I have handled it by catching and ignoring this particular error by the text in the error message, which works but I would rather fix it so that this error doesn't occur at all.

[Code]....

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved