Fiddler Is Showing A Bunch Of 404 Errors To Embedded Dlls?
Dec 28, 2010
In the application, there is an HTML page that references a .dll (dllMain) using an <object> tag.
dllMain references several other dlls (dll1, dll2, and dll3).
When the web page is loaded, it loads just fine and everything works.
However, there is a bit of a delay in the load time, using fiddler I discovered that it is trying to find dll1, ddl2, and dll3 and failing, resulting in 404 errors... by watching the web page load while watching fiddler, it is clear the delay is from the 404 errors originating from trying to find these embedded dlls.
Is there any way to make the application stop probing for these embedded dlls? Clearly it doesnt need to since the application is working even though these aren't being found?
View 3 Replies
Similar Messages:
Apr 29, 2010
Im using the following code:
[code]....
To return a partial view and a form through JSON. It works as it should, but as soon as I get modelstate errors my ValidationSummary does not show. The JSON only return the default form but it does not highlight the validation errors or show the validation summary.
Am I missing something?
This is how I call the RenderPartialToString:
string partialView = RenderPartialToString(this.ControllerContext, "~/Areas/User/Views/Account/ChangeAccountDetails.ascx", new ViewDataDictionary(avd), new TempDataDictionary());
View 2 Replies
Apr 8, 2010
Imagine, a model like this:
[AddressValidation]
public AddressType[] Address { get; set; }
internal class AddressValidation : ValidationAttribute
{
public override bool IsValid(object value)
{
//Assume we are valid
var isValid = true;
//Cast to something useful
var addresses = (AddressType[])value;
var defaultAddresses = addresses.Count(a => a.AddressCode == AddressCodeEnum.@default);
if (defaultAddresses == 0)
{
ErrorMessage = "One address must be the default address";
isValid = false;
}
else if (defaultAddresses > 1)
{
ErrorMessage = "Only one address can be the default address";
isValid = false;
}
//Return the result
return isValid;
}
}
When the model is validated by the controller, any of the subordinate addresses are properly validated and any errors are returned as modelstate errors. However, the custom attribute's error is never added to modelstate, even though it validates false. It seems as if this should work, the validation is called and I can step through it - it just never gets added to modelstate.
View 1 Replies
Sep 30, 2010
I thought I had this working, but right now I'm confused. When I try to cause an error by re-using an email, it gives me the success message, even though nothing is added.
This is my CreateUserWizard
<asp:CreateUserWizard ID="CreateUserWizard1" OnCreatedUser="CreateUserWizard1_CreatedUser"
View 3 Replies
Oct 16, 2010
I'm new to c# and I seem to be having a problem with an error message. If my textbox is left empty my code will throw a format exception and display the message in a label. If I then add a number to the textbox it runs correctly but the error message remains.
[Code]....
View 5 Replies
Jun 9, 2010
I am developing a web application in which I am suddenly facing an issue. I have a webpage which contains many controls, one of the control is JQuery color picker. Now, I am upgrading my system with telerik controls. As part of this process, I replaced textbox(txtcolor) with radcolorpicker with a different id(colorPicker). Suddenly, my code behind file is not throwing any errors like 'unable to find txtColor'. It is running successfully without build errors. But, when I open the page, system is throwing runtime exception(txtColor not found) which is correct.
I tried to change other controls with asp.net controls, still the problem persists. So, I dont think it is anything to do with telerik.
View 1 Replies
Aug 5, 2010
Is it possible to edit HTTP request using fiddler so that my asp.net application hosted elsewhere return true for the following code block
HttpContext.Current.Request.Url.Host == "localhost"
View 1 Replies
Nov 16, 2010
Where can I see the total size of ViewState out of the total size of the Response (value in bytes in the Body column) in Fiddler 2?
View 5 Replies
Jul 18, 2010
I am using ASP.Net + .Net 3.5 + VSTS 2008 + IIS 7.0 + C# to develop a web application. I want to use Fiddler to debug (i.e. monitor request and response Http traffic) local traffic -- i.e. when I test web application inside VSTS 2008's built-in test ASP.Net web server. Is that feasible? If yes, how to monitor such traffic? For example, in VSTS 2008's built-in ASP.Net test web application server, the Url I want to monitor request traffic sent to [URL] and its response (i.e. when F5 is pressed in VSTS 2008).
BTW: I previously think Fiddler could only be used to monitor port 80 Http traffic, not sure whether port 1870 could be monitored?
View 3 Replies
Dec 4, 2015
Try to do the following .Have a service (MVC) that i run locally, so it goes like URL...The MVC looks like this:
Code:
[HttpPost]
public XElement MovieDetails([FromBody] MovieRequest MovieRequest)
{
return _movie.getMovieDetails(MovieRequest.movieid);
}
How do I call the movie id number from fiddler?I am trying it like this:
Or even like [{"MovieRequest":"1"}]
or <MovieRequest>000001</MovieRequest>
or <MovieRequest>000001<MovieRequest>
or <MovieId>000001</MovieId>
and i get this BS
View 6 Replies
May 6, 2010
So far I've been successfully using fiddler to sniff web service traffic from both test fixtures, console apps and web projects.
Today I noticed I am not able anymore to sniff that kind of traffic if I am running my web application (it's a ASP.NET website, hosted locally on IIS). I see all the local traffic but the web service traffic is just gone (the service is being hit as I do see the response debugging into the code).
I am still able to successfully sniff soap requests and responses from test fixtures or console apps in the same solution (exact same environment).If it was a windows (I am on Win7) security update or the likes it would never work I guess (unless it affects only traffic routed through IIS).
What should I be looking for that could cause the emergence this behavior?
NOTE: I can see local traffic, but not the SOAP request/responses to the web service which is not hosted locally anyway (it's a sandbox another team is providing)
EDIT: This bit of configuration did the trick (found on Rick Strahl's blog)
<system.net>
<defaultProxy>
<proxy [code].....
View 5 Replies
Jul 2, 2010
I have a C# web forms ASP.NET 4.0 web application that uses Routing for URLs for some reason custom errors defined in the system.web section of my web.config is entirely ignored and it will fall back the IIS errors.
This gets entirely ignored
[code]....
This would be a minor inconvenience except that by the fact it falls back to IIS native instead of my application it completely circumvents Elmah logging my 404 exceptions correctly.
View 3 Replies
Apr 7, 2010
I keep getting a Request format is invalid.
Here's the raw http that get's sent:
[code]....
View 1 Replies
May 7, 2015
"HTTP data inspector Fiddler." what is the use of this and give me any article for how to use fiddler to monitor wcf service in detail
View 1 Replies
Oct 7, 2010
I got an error and do not know how to fix it!
Fiddler has detected a protocol violation in session #2331.
Content-Length mismatch: Response Header claimed 1939 bytes, but server sent 1983 bytes.
View 1 Replies
Apr 28, 2010
I want to port an existing, legacy, ecommerce website from ASP to ASP.NET.What approaches do I have ?is there a way to run an ASP file with an ASP.NET engine ?are there tools to automatically convert ASP to ASP.NET and do they work on complex websites
View 3 Replies
May 16, 2010
In my ListView control, I display a whole bunch of details for students. One of the fields -- Status -- returns a boolean value. I don't want to display True or False. I'd rather display something more meaningful in English. How do I display "Approved" or "Declined" instead of simple True or False for the following?
[Code]....
View 2 Replies
Mar 15, 2011
I've already heard of http://www.codeproject.com/KB/audio-video/avifilewrapper.aspx
...but I just can't get it to work with ASP.NETI've perused the source about a hundred times looking for anything that might suggest it's incompatible with .NET 3.5 or not going to work with my other frameworks.
View 1 Replies
Sep 15, 2010
If I want to update 1000 records at a time in the database what is the best approach.
View 6 Replies
Jan 19, 2011
I used to work in the IT field, but because of an accident and meds I have lost a bunch of my memory. So, I'm in need of relational database help..I've got a web site I want to put up that will sell books. I'll be using SQL server 2008. I'll be using Pay Pal's Cart, etc, so I just have to put up some buttons on the web site, but I need to track, display, etc, the books and properties about the books such as Authors, Paper back or hard cover, first edition, or something else, etc,..I have a table for books obviously, but I'm wondering if I should break out the Authors out of that table? I mean I don't see why except that if I end up with some books that have the same author then there names will be stored more than once, but I will be doing a lot more queries than inserts. I've got Customers, Book Types which is if the book is a hard cover, softcover, first edition, etc,. I will relate the Books to the Book Types of course, but again, should I have an authors table? Hope this makes sense.. I am using Visual Studio 2008 Pro, and want to do my relations there, so I thought I'd do so in the IDE if possible? I can't remember, but I thought it was possible?
View 6 Replies
Aug 8, 2015
I am trying to create a button to enable / disable a bunch of code.I would like to use the same button. In the first ''click'' i would like to enable the code (i.e. Play sound file) and in the second "click" to disable the code (i.e. Stop sound file)How can I do that?
View 6 Replies
Dec 21, 2010
When I build my program, if there's one error that prevents it from running, instead of just getting the one error I'll get around 50 additional errors in addition to the real one such as:
Error 27 Validation (XHTML 1.0 Transitional): This name contains uppercase characters, which is not allowed.
Is there any way to not show these?
View 2 Replies
Feb 22, 2011
I have some dedicated servers running ASP.NET applications over internet. All servers are fully trusted (all belongs to the same company) and need to communicate to each other in a secure way. They are not part of a domain or work group and should not be.Each server acts as both client and server of some WCF services. These services are few (1-2 per server) and light (a little data is transferred on each call).
I can use self-signed SSL certificates or X509. I'm looking for some way to make sure nobody from internet can call a WCF service on a server. New server would be added in the future.I read about WCF but now I'm confused, is it good idea to use self-signed SSL certificates or not (non self-signed is not an option at the moment), which binding to use, which security mode to use, which authentication method to use
View 2 Replies
Sep 30, 2010
I'm trying to delete a bunch of records in mysql. The record info to delete (userid, name) is stored in an arraylist. It seems to only delete the first record and gives an error ("Transaction has already been rolled back or is not pending.") afterwards. I have the transaction commit inside the loop which I think is the issue but not sure how to go further if I bring it outside of the loop. Here's the relevant bits of the code.
try
{
ArrayList alist = new ArrayList();
//alist gets populated with data like (12345,robot)(23456,car) here.
MySqlConnection conn2 = new MySqlConnection(query_connection);
conn2.Open();
MySqlCommand command2 = conn2.CreateCommand();
MySqlTransaction mytransaction;
mytransaction = conn2.BeginTransaction();
command2.Transaction = mytransaction;
for (int i = 0; i < alist.Count; i++)
{
string[] s = alist[i].ToString().Split(',');
try
{
command2.CommandText = "DELETE from users_settings WHERE UserID=" + s[0].ToString();
command2.ExecuteNonQuery();
command2.CommandText = "DELETE from users WHERE ID=" + s[0].ToString();
command2.ExecuteNonQuery();
mytransaction.Commit();
}
catch (Exception e){
mytransaction.Rollback();
}
}
}
catch(Exception e){
}
View 1 Replies
Jan 25, 2011
I currently have an asp.net page which a loggd in user goes to and theres a bunch of dynamically generated links to zip files that he or she owns and can downloads.Currently they click download and I have no way of knowing if it completes succesfully etc so can't log it. I do log the attempt.Is there are good download manager or solution I can use so they will have progress bars on the site, they can queue multiple ones up and most importantly I can track failed and successful downloads.
View 1 Replies
