if i write:-SELECT Distinct TOP(10) Data,parentcategoryid.then it does not give me distinct.it gives me repeated values.i dont now what to do.but,if i write SELECT Distinct TOP(10) Data then it gives me disticnt valeus. what is the prob. and how to solve?
View 5 Replies
[Code]....
When I want to get the output values its okay but I also want returning a table as a result data.But Datareader has no rows.is it possible if I want a returning query result and multiple output values togather ?I wrote a test above.I can get output values as sqlparameters. But Datareader attached to a Gridview is empty.can you detect whats wrong here and it doesnt return a query result.So stored procedure is not standart or ı am doing something wrong.this doesnt raise any exception.but not returning any data.
[code]....
I have an asp.net site which includes a "search" page that queries an SQL table, then redirects the user to a "results" page where the results of the query are displayed. The parameters for the query are assembled into a string which is the SELECT statement. I've been asked to add additional functionality that requires a secondary search which takes place on the "results" page. How can I pass the parameters from the "search" page to the "results" page so that I can access those parameters in the code behind? Here's the first page code behind (I inherited most of this from another developer):
[Code]....
And the second page--it would be on line 51 that I would need to insert the parameters from the search above:
[Code]....
The drop down list is used to determine what search criteria will be used to find an invoice. I tried to set the Select method in the switch statement. I don't understand how to set the Select Method and the select parameters programmatically though . I tried a few different ways but can't make the compiler happy. My ODS is in scope in the code behind. I'm not able to access it's properties though. The BAL resides in a separate project that is a ClassLibrary. I also have a using statement for the ClassLibrary project in the code behind.
give me an example of how to do this?
Mark up:
[Code]....
[Code]....
[Code]....
[Code]....
I have a problem with SELECT COUNT query in ASP.net. I want to create CMS with articles which have categories (which have the option to be deleted). The problem is that I want to get the number of articles within the specified category so if there aren't any articles with the specified category I can proceed with the category deletion.I have the following code:
[Code]....
After I click the button "Obriši" (Delete) I receive the following error: "Must declare the scalar variable "@KategorijaID"." I understand that the problem is with parameter, but I don't know how to correct it to use it for both the "command" and "brisanje" SQLCommands.
I am trying to show a Gridview that lists information in a database based on a query. The query takes a parameter of a string, how do you define what this parameter is. An example of the screen I am stuck at is:http://static.asp.net/asp.net/images/dataaccess/07fig08cs.pngAn example of the code i want to use is:parameter for my object data source select query = OBDS_Query_ParameterOBDS_Query_Parameter = str;
Sorry Im not sure how to explain it...For instance if I have a query that GetAllProducts(String userName); How do i pass or define what userName is when using the data gridview. I am using an Object DataSource and linking the data Gridview to that. I can do this without the object data source and strictly melodramatically like this:
quartz_SongsTableAdapter songsAdapter = new quartz_SongsTableAdapter();
CurrentRole = "admin";
GridView1.DataSource = songsAdapter.GetSongForClient(CurrentRole);
GridView1.DataBind();
I'm creating a webpage with serveral web controls to set search parameters for querying an SQL table. My plan is to use a TableAdapter to hold the query. If the user decides not to use one, several, or any of the web controls to filter their search, I want the SELECT to execute without complaining that it doesn't have parameter values. Should my SQL query look like
[Code]....
I need to get a querystring in a select parameter
datasource.selectparameters.add("PostId", request.querystring("PostId"))
Something like that...but...i cant get the snytax right.
I have a DetailsView control with a SelectMethod and two select parameters wich one of the parameters is a control parameter, The parameters are not passed to objectDatasource's select method, the objectdatasource has been defined as follows:
<asp:ObjectDataSource ID="objCurrCompetitor" runat="server" SelectMethod="GetCompetitorByUserAndCompetition"
DeleteMethod="DeleteCompetitor"
TypeName="MZ.Competitions.BLL.Main.Competitor"
[code]...
I have SQLDataSource for my gridview. By default it works fine but i need to determine a few things before calling my procedure. By this i mean i need to determine a few things about the fields completed and set a flag to determine where the procedure will look.
I found a few examples online on passing parameters in code behind, but cant seem to get them to work. Here is what i tried and cant get results back. When i execute the procedure on the SQL side with the same parameter values, it works, so i know its returning results, so means my values are not being sent or im doing something really wrong. I have some of the lines commented out so the page can load and display for now.. but i need to get it working with custom parameters and flags.
Here is my SQLDataSource:
[Code]....
[Code]....
I have a need to add my page controls dynamically in code behind.
I do well, adding a dropdownlist, a SQL datasource to populate it, setting it to autopostback=true, and adding a gridview and its SQL datasource.
What I'm unsure about is how to programmatically refer to the SelectParameter, being a control (the DropDownList), and its selected item.
It seems like this would be fairly straight forward. I've got a gridview that loads up using one stored proc, but I've got a searchbox to filter the grid, and when the user enters some criteria I want to use a different proc to return the results. Something tells me I should be doing this with one procedure, but I can't seem to make that work either. When the form loads, my grid is populated. And if I leave my search criteria blank and search anyway, my grid is still populated correctly. But if I enter search creteria, I get diddley squat. What gives? Here is the relevent snippets.
[Code]....
Is it possible to select on page load or page pre load a different master page depending on a number of parameters?
A simple example would be if the device is mobile, use master page A, otherwise use master page b.
Can this be done?
I'm trying to allow my users to select a record from their list of attendees and edit it using a details view positioned below the GridView. The issue I'm having is when I run the code I get my error message and no data is displayed in the DetailsView. Error Message is:
DataBinding: 'System.Data.Common.DataRecordInternal' does not contain a property with the name '10002'.
[Code]....
suppose that i have a gridview and an objectdatasource in my webform
with that i want to include several search criteria
the problem is that i want theme dynamic
for example
i have a dropdownlit with customers list
the first item in the dropdownlist is "All customers" for example
if i select it no "customer select parameter" is created
otherwise i have a "customer select parameter" for the objectdatasource and it's value is the dropdownlist.selectedvalue
I want to have a dropdownlist in the footer row of a gridview. The dropdownlist must be populated with an stored procedure that receives a parameter and has a select. Is that posible?? I think yes but I having problems with the parameters.
[Code]....
The exception says incorrect sintax... but I've changed the procedure for something very simple to solve the problem like select 'hello' or select 1, 'hello' and I'm getting the same problem...
[code]....
Is ther a way I can tie DataSource to SqlDataSource on aspx page and pass select parameters?
I am trying to write a stored procedure that takes out a list of blog entries from a table (tblFeedEntry) as well as the amount of comments that each blog entry has gotten (tblFeedComments) but all I can get is the total amount of comments of all blog entries together, displayed on all entries. This is how my code looks today:
[Code]....
I am guessing that the problem is that the declared variable is not picking up the id of the blog entries, instead it picks up everything. The original select and the select in the declared variable are not connected. How do I connect them?
I am moving to the world of ASP.NET from an Access VBA / VB6 background and having read a few books on the subject I am still confused about communicating with SQL server in VB with ASP.NET.
As a very quick explination I am used to communicating with the server by passing strings containing the data I want to write (or read) such as:
[Code]....
I do not seem to be able to work out from ALAX, Dynamic Data, Bound Controls, DataViews, connecting to services with SOAP, DataSources and all of the other methods of database communication in ASP.NET which is the right system to do the simple reads and writes in SQL that I want to do.
At present I have a page with all of the controls on it required to collect a block of data I want to insert, it is all now fully validated but although I can build the SQL INSERT command in a string I cannot figure out how to fire it over to the local SQL Express server. Am I even doing this correctly or do I need to look at other controls?
how to write a select distinct column1 from another select ?
i mean SELECT distinct column1 from (SELECT column1,column2,column3 where column1 =1)
Is it possible to pass a parameter to a server report when using SQL Express 2008? For example, if I have the following query:SELECT xyz FROM abc WHERE Month = @UserSelectedMonthI want the user to be able to select the month using a drop-down and have the query accept that for @UserSelectedMonth.
View 6 RepliesI had an sqldatasource. I had set its parameter as follows
[Code]....
I'm using cursor to select a list of records in sql server 2005
There are 80+ columns in the result, the cursor parameters named as @pn1,@pn2,@pn3... @pn12. @pid1,@pid2,@pid3.... @pid12
[Code]....
The above code rotates the parameter ('@pn' + loop id) to get the cursor parameter value.
I have a stored procedure which handles a SELECT query on an SQL 2005 table. Works fine. Now I need to add a bunch of parameters to the query--these are all boolean, with checkbox web controls on the .aspx page to set the parameters true or false, and bit columns in the SQL table. These parameters need to be optional, so that parameter doesn't filter out any records unless it's checked. Here's the original sproc:
[Code]....
Can I just add on all those boolean parameters like so?
[Code]....
I've used a sql data source to execute an insert stored procedure into my sql database. This time though, I want to execute the sp from my code behind. BUT, I'm stuck on the parameters and how to pass in the ones for the insert, and return one parameter, which is the identity of the row just inserted. The error I'm getting is. I'm missing something, but I don't see what... I think it's with the input/output parameters...
Procedure or function 'sp_CloneIT' expects parameter '@ClonedMatterID', which was not supplied. My stored proc
[Code]....
