I'm using the asp:ChangePassword control. I would like to disable the ability for the user to enter a new username but the default shows the current user's UserName and allows editing. Ideally, I would be able to find the child control in the ChangePassword control that is the UserName textbox and set Enable=false.
View 2 RepliesI have been able to set focus on the UserName TextBox of my Login control in the OnLoad event by performing the following.
[Code]....
I have tried replicating the above for my ChangePassword control however I get an exception stating that the object is null.
I have the DisplayUserName property set to true.
[code].....
i get all the error message in validation summary except one.the one is if i enter the wrong entry in old password textbox i am getting the error message in literal(ID=Failturetext).i want to show it in validation summary.is ther ary way to do this without the use of event "ChangePassword1_ChangePasswordError".
I would like to dynamically change the CancelDestinationPageURL and ContinueDestinationPageUrl at run-time.Firstly can I actually changes these at run-time and if so how what approach should i take?
View 2 RepliesI want to disable StepNextButton after it's clicked (to avoid multiclicking).
The problem with OnClientClick="this.disabled=true;" that it cancels the postback and doesn't continue to a next wizard step.
I have a web page which is using PasswordRecovery control.Its working fine but I have a scenario in which I have to disable Viewstate for the whole application.Now after disabling viewstate when I visit the webpage I have noticed that PasswordRecovery controls is not working (Every times when I submit the default button to go to step 2, the postback occur but not moving to step 2).
View 3 RepliesHow can I access to the CancelPushButton ?
This doesn't work ! it returns always null !!
var cancelButton = ChangeUserPassword.FindControl("CancelPushButton");
[Code]....
I'm trying to limit what a user can see based on the roles that the user is in. I need the username to figure out what role they are in. I cannot, for the life of me, figure out how to get the username out of this loginView control. I have tried drilling down into the controls of the loginView but can only ever get this:
[Code]....
What will happen if we follow below steps?
1) Open Login.aspx from our web site
2) Copy the address bar
3) Login it with User and Password
4) Open another Tab or another IE window paste the copied address and hit 'enter'
5) Login with another User Name
Now login with atleast 3 to 4 Users.
All Users should see same form but different contents.
Now, if we press refresh button then contents will get change but check wheather the Logged In User name is chaning or not.
I worked on VS 2010 default site.master.
Here, I already applied above process and when I do this my UserName (LoginName) control gets changed.
I ask the question here : http://forums.asp.net/t/1625117.aspx. And still I am doing R & D on it.
i have went with the standard membership method for validating and logging users into the application. i have added a column to the adpnet_Users table called customer_number.
once the user is logged in, i want to get the customer number for that user. what is the best / easiest / industry standard method of accomplishing this?
This may be very simple but I can not figure it out. I am using ASP.Net 3.5/Visual Studio 2010. I have placed a LoginName Control on the page and the login name is properly displaying. I am using forms Authentication and it is set up properly in the web config file. I simply want to insert the logged in username value into the database table so I can track who created the records. I am happy to be able to insert the UserID value. I assume the values are derived out of the aspnet_Users table. Hopefully someone can provide a way to do either. I am not a coder so giving me a quick try this answer won't help me much. I would need to really see the entire solution and code.
View 4 RepliesI have a CreateUserWizard control to be able to allow an anonymous user to create an account. Provided that all entered information is correct that the user enters, a new account is created for him/her. But also, when this user is created, I want to [b]also[/b] add the username to another table in my ASPNETDB database. How exactly can I "tap" into the event that creates a user and adds it to the appropriate tables (aspnet_Users, Members, etc.) and make it add the username to yet another table?
View 1 RepliesI have an ASP.Net application that uses the Membership Login Control. The thing is, we wanted to avoid giving our members more than they need to worry about, so we didn't want to have to make each a custom username. So the thing is, I want to make the Login Control display a DropDown List populated with a list of usernames as opposed to a text box.
View 7 RepliesHow to update username of current logged username?
View 10 RepliesI wanted to know how to add the feature- that user should be redirected to an error page where the error will be display, upon entery wrong username/password when trying to login through an asp.net login control?
1. how to redirect the user to an error page upon entering wrong username/password (from a login control which is placed on master page)?
2. how to pass the error to the error page so it can be displayed there?
how to make login control allow users to login by either username or email address
View 1 RepliesI'm not entirely sure if this is the right place to ask, but here goes.
I have a website that uses windows integrated authentication. This is great and the way i want it, BUT, i now have a single .aspx file in that site, that i would like anonymous access to.
I am running this on IIS 6 on a windows server 2003.
How do i go about doing this, if i even can do it? web.config, IIS console or do i need to make a new site for this one file alone?
I have a dropdownlist inside a DETAILSVIEW....now when i select one particular option. a textbox should open up and enable me to enter a value in it and when i click insert button of the detailsview..the value i entered in the textbox shud enter the database and not the value i selected in the dropdownlist...how do i go about it....also how do i access the ID of the control inside the detailsview.
View 2 RepliesI thought disabling ViewState for a server control would cause this control not to keep its state after a postback. I thought the same would happen if I disable ViewState for the whole page.
However, I tried to create an example to show this to a colleague and was puzzled when a textbox on a page would keep is state (in this case its Text property) after one or more postbacks, even when ViewState is disabled everywhere (both at Page level and Server Control level). Please see the code below:
[Code]....
I can keep pressing the Post back! button and every value typed on the textbox is still there after the postback(s). I'm using VS 2008.
After this example I now assume I don't understand ViewState as I thought I was.
I am using the ASP.NET membership provider controls (ChangePassword and PasswordRecovery) and they generally work just fine. Unfortunately they don't send any emails once the process is finished. I set up the SMTP server using the ASP.NET Configuration Website and it added the following lines to the web.config:
<system.net>
<mailSettings>
<smtp from="maildaemon@pagetailors.de">
<network host="pagetailors.de" password="XXXX" userName="XXXX" />
</smtp>
</mailSettings>
</system.net>
I also tried using the IP adress of the server instead of the domain. In addition to that I set the maildefinition properties on the used web controls:
<MailDefinition From="maildaemon@pagetailors.de"
Subject="Your new password">
</MailDefinition>
Once I finish changing or resetting the password, the controls shows the success message. It does not show any errors but the mails are not sent. I also checked the SMTP log files on the server (it's a MailEnable server) but couldn't even find an attempt to send these messages. I am using a custom email helper class which manually sends an email using the following settings:
public static void SendEmail(string from, string to, string subject, string body)
{
SmtpClient mailClient = new SmtpClient(ConfigReader.GetStringValue("MailServer"));
mailClient.Credentials = new NetworkCredential(ConfigReader.GetStringValue("MailUsername"),
ConfigReader.GetStringValue("MailPassword"));
MailMessage mailMessage = new MailMessage(from, to, subject, body);
mailClient.Send(mailMessage);
}
The values for mailserver, username and password read from the config file are the same as defined in the ASP.NET configuration tool. These mails are delivered successfully.
I am using a masterpage. On a accounts page I have a Usercontrol on this UserControl I have one more user control. If Account is closed I want to Disable all the controls on Accounts page ( including parent and child userControl - controls collection).
View 1 RepliesI have a popup extender that shows when an edit button in a grid is clicked. I am disabling the checkbox and submit button when a particular row is clicked with sone validation. When I close the popup and show again by pressing button on another row the controls are still disabled. Why are these controls properties set permanently on entering the if condition ?
button click event for button on the panel that pops up on a button press in grid
[Code]....
I am setting up membership and rolls for a small forum site that im working on. All this info is stored in the standard aspnetdb database. When a user is logged in and saves a post to the forum, their UserId is saved to a database in unique identifier format such as: b40e346d-0399-4bbb-90ee-c7c440726cfd. I want to set up a web service so that the name of the author of each post can be clicked on to retieve details about him or her. Rather than passing along the UserId of the author to the web service, I want to pass along the UserName and use that to retrieve the user's Id, which will in turn be used to query the database. I cant seem to find info on how to do this. I can find how to retrieve this kind of info for the current logged in user, but not any or all users in general.
View 5 Repliesi am using .net membership. How can i get username from email address?
View 3 RepliesI have two websites that run on two different servers and they both both have their own asp membership databases. One is http:// and one is https://. Is it possible to create a way that a user can access both websites while only entering username and password once? Or if the user logs onto the https site can I then redirect to the http site and auto authenticate?
View 3 Replies