Web Forms :: Assign Properties For Button Control At Runtime?
Dec 5, 2010
I have a button in a details view that I want to change the properties of at run time. When the user clicks the edit button the details view goes into edit mode. I also want the edit button to turn into an update(or save) button so the use can click it to persist the changes done in edit mode. I've had to create a new instance of the button which I can do. I've done that with the cast below, I assume this is a good way to do this. I'm now having difficulty assigning the properties. I tried this but get a "Object Reference not set to an instance of an object" error. I thought I was working with an instance of the object in the code below, but the compiler doesn't agree. How do I set the text, and other properties for my button instance?
[Code]....
View 9 Replies
Similar Messages:
Jul 24, 2010
I am generating dynamic textboxes with the ids as follows table row 1:
no1,name1,addressline11,addressline21,city,pin,communicationAddress1(here the row count I am appending at last to the control id's)table row 2: no2,name2,addressline12,addressline22,city,pin,communicationaddress2
table row 3: no3,name3,addressline13,addressline23,city,pin,communicationaddress3 and so on....
A new will be created when user hits enter key in the last textbox i.e., communicationaddress.For validations I have used java script. Now my requirement is when user types the address line the content of the textbox should be copied to communication address.
communication address = addressline1+addressline2+city+pin
so in theabove four textboxes when the user hits the keys the matter appending to the communication address with ',' seperated. I acheived this through key press event in java script..................
View 3 Replies
Jul 27, 2010
I have a table created during runtime, how can I set its properties such as border width, width, v-align and etc?
View 6 Replies
Jun 22, 2010
I have a GridView containing records from a table which can be deleted or updated. If you want to edit a row, it should display the update and cancel buttons so that you can keep or cancel the current edit (I hide update and cancel as default). I am using the following asp for the button column of the GridView:
<asp:TemplateField visible ="true" >
<HeaderTemplate>
<div id = "header">Maintain</div>
[code]...
View 1 Replies
Feb 16, 2011
I am a ASP.Net Web Forms developer and new in MVC. I observed that MVC reccommend not to have code behind file. In Web Forms, we handle events in code behind then change properties of various controls there. How to do the same in MVC? For example, if I have to change back color of a label on click of a button then how to do this in MVC?
View 4 Replies
Apr 22, 2010
I have a ASP.Net page that has a gridview control. This gridView control has a checkbox controls. I would like to assign a boolean value from a database field to the Checked property- Checked='<%# Bind("RESULTS") %>'.
When page loads,I get error - Specified cast is invalid!
The code is as follows...
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataSourceID="dsResults"
BackColor="White" BorderColor="#CCCCCC" BorderStyle="None" BorderWidth="1px"
CellPadding="3" OnRowUpdated="GridView1_RowUpdated">
<Columns>
<asp:TemplateField HeaderText="COMPLIANT" SortExpression="RESULTS">
<EditItemTemplate>
<asp:CheckBox ID="CheckBox2" runat="server" Checked='<%# Bind("RESULTS") %>' />
</EditItemTemplate>
<ItemTemplate>
<asp:CheckBox ID="CheckBox1" runat="server" Checked='<%# Bind("RESULTS") %>'
Enabled="False" />
</ItemTemplate>
</asp:TemplateField>
Note: If a constant value is passed at design time it works fine. But i want to assign the value at runtime using Bind.
Environment details: VS 2008, ASP.NET 2.0 and .Net Framework 3.0 & C# language.
I tried returning values like 0s and 1s, Ys and Ns and True and False from a database field. But i still get the above mentioned error.
I tried retreving the value in OnRowDataBound event using Eval, since Bind is not available in code behind. But it would make the field readonly and i cannot edit and update the Results field.
Even though there is a value returned by the query why does the Checkbox does not assign the value using <%# Bind("Results") %> to Checked property instead throws error - Specified cast is invalid.
how i can edit and update Checkbox.
where did the Bind method of ASP.Net 1.x is moved? How can i use Bind in code behind of ASP.Net 2.0?When i type DataBinder the intellisense shows Eval and other stuff but i don't see Bind that would solve the problem of two- way binding.
View 16 Replies
Jan 20, 2011
I am developing an application using ASP.Net MVC 2. I have different modules and every module have different styles. My design goal is to use single master page and assign CSS at runtime based on the module selected by the user.
View 4 Replies
Sep 29, 2010
In my controller have a FormViewModel which inherits from a domain class declared in dbml. In the constructor of the FormViewModel I want to do a shorthand assignment to the inherited class properties with the passed in object (ie thisPerson) without iterating through each property of the inherited class and assigning its value with corresponding property in the passing in object. Should I use super, base, this, or something else?
[code]....
View 1 Replies
Jan 27, 2011
How can i assign value to an gridview extender control properties during runtime in aspx.cs page ???
View 1 Replies
Aug 25, 2010
i want to send one html page with email. the contents of label in it will get change.can any one tell me,how to assign text to label in vb.net code at runtime.
View 4 Replies
Nov 3, 2010
My UI layer calls my business layer which populates a DTO. I need to display properties from the DTO on my ASPX page. Should I create public variables on the code behind page for each of the DTO properties and reference like <%=PublicPropertyName%> OR is it ok to set the DTO instance to public and reference the properties directly like <%=dtoInstance.propertyName%>
Additionally, would it be better if I just created Literal and Label controls for every item on the ASPX page and just populate them from the code behind only?
View 2 Replies
Mar 11, 2011
I want to add an item at runtime to my global settings on an ASP.Net web application. It seems that the Properties.Settings.Default.Properties object is read-only, or at least it's Attributes are so I was trying to write directly into the web.config file. This works correctly but the stuff I found was just dropping my info into the AppSettings section, when I need it to be in the ApplicationName.Properties.Settings so it is made available through the Default.Properties object.
The code I have basically goes like this:
Configuration config = WebConfigurationManager.OpenWebConfiguration("/");
config.AppSettings.Add(mySettingName, myValue);
config.Save();
Which is fine and dandy, except that - obviously enough - my setting turns up in the <appSettings> section of the file. Is there a way I can use the Configuration object to access the ApplicationSettings/ApplicationName.Properties.Settings part of the configuration file? If so how? If not is there another way to write values into my application settings from code?
View 1 Replies
Nov 2, 2010
I am working with crystal reports. I created a button on crystal report viewer toolbar using the following code protected void Page_Init(object sender,
EventArgs e)
{
Control ts = CrystalReportViewer1.Controls[2];
if (ts.ToString().Contains("ViewerToolbar"))
{
ImageButton BtnExport =
new
ImageButton();
BtnExport.ID = "BtnExport";
BtnExport.ImageUrl = "images/pdf.png";
BtnExport.Click += BtnExport_Click;
ts.Controls.Add(BtnExport);
}
UpdatePanel UpdatePanel1 =
new
UpdatePanel
();
System.Web.UI PostBackTrigger trigger =
new System.Web.UI.PostBackTrigger ();
trigger.ControlID = "BtnExport";
UpdatePanel1.Triggers.Add(trigger);
}
My problem is whenever I click the button to export the report, it shows an error like below: Microsoft JScript runtime error: Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled.
Details: Error parsing near .....
View 7 Replies
Jul 2, 2010
I have a very simple setup, single mycontrol.ascx with assoicated mycontrol.ascx.designer.vb and mycontrol.ascx.vb file. mycontrol.ascx embeds a single reference to a custom control: "MyMenu":
<mM:myMenu id="myMenu1" runat="server" />
This has created a protected reference in the mycontrol.ascx.designer.vb file:Protected WithEvents myMenu1 As Global.CustomControls.MyMenuNow, when I breakpoint the Page_Load() event of mycontrol.ascx, and inspect the members returned from the type via:
Me.GetType().GetMembers()
I cannot any reference to myMenu1. If I look at the control with intellisence, the property is accessible:
Me.myMenu1 Can anyone explain exactly what I'm missing and what I need to do to access designer created properties at runtime through reflection?
View 2 Replies
Feb 20, 2010
I hav a small problem, idont know how to express it. So i am using images for this purpose
First Page
Second page
As Shown above i have to had a first page with each button for each row and when someone clicks on that button, he should be redirected to another page with a reference of that row giving the complete details of that row. Hope u all understood, the problem, now how to give the reference of the row to the button is my problem hope u all understand. By seeing my points u can understand that i am a beginner, so pls kindly explain me in detail.
View 3 Replies
Jun 11, 2010
I tried to assign the value of button text through the following syntax where MyValue is the public variable with the value "Checkout" in the code behind.
[Code]....
But it turned out that it displayed <%=MyValue%> instead of "Checkout". Yes of course I can still assign button text value in the code behind but just don't know if there is any other solutions to it.
View 5 Replies
Nov 26, 2010
I need to access a control inside a repeater and change its properties. To enable it or not. I got an erorr message Object reference not set to an instance of an object. Here is my code inside a method. protected void
rptCAP_ItemDataBound(object sender, RepeaterItemEventArgs e)
{
LinkButton lnDel = (LinkButton)rptCap.FindControl("lnkDelete");
lnkDel.Enabled = false; //<<<<< this is where the error occur
}
The name of the repeater control is id="rptCAP"
View 3 Replies
Jun 6, 2010
how to move a button at runtime. I need to slide it to the left under certain conditions. I am using vb in code behind and really need to do it here.
View 10 Replies
Apr 14, 2010
how to assign the dynamicData into href={0} when user click on the Pass button?
<asp:HyperLink
id="test"
onclick="btnTest_Click"
runat="server"
href="{0}">Pass</asp:HyperLink>
code:
HyperLink test = e.Item.FindControl("test") as HyperLink;
test.Text = string.Format(HttpUtility.HtmlEncode(dynamicData));
View 6 Replies
Oct 8, 2010
I have added a few WebUserControl's to a form and I want to check their properties values in a code behind (vb) when a user click a button.I tried unsuccessfully to get a reference to these controls using the TypeOf and GetType functions...How do I get a reference to the webUserControls ?
View 5 Replies
Mar 25, 2011
Can I put multiple fields value into the text properties of a link button? My below codes doesn't work. I would like to display "000001-1", "000001" being the job_id and "1" being the job_seq and separated by a dash.
[Code]....
View 2 Replies
Mar 8, 2011
i have an image button that i draw with its data in the runtime and i want in the event og onclick of it, apopup model appears to confirm delete or update that row. the problem is here that i made alot of searches but all i found was in the design time.
View 6 Replies
Mar 3, 2010
I am using an AdRotator Control which bind with SQLDatasource and it working fine My query is how to assign a CompanyName which is field in my SQL Table on the Tooltip property of the AdRotator Control.
Below is code i have applied just wanted for tooltip
<asp:Timer ID="Timer1" Interval="3000" runat="server" />
<asp:UpdatePanel id="UpdatePanel1" runat="server">
<contenttemplate>
<asp:AdRotator ID="AdRotator2"
runat="server"
DataSourceID="SqlAdsRightImage"
ImageUrlField="ImageUrl"
NavigateUrlField = "NavigateUrl"
AlternateTextField = "AlternateText"
ToolTip = ? />
</contenttemplate>
<triggers>
<asp:AsyncPostBackTrigger ControlID="Timer1" EventName="Tick"></asp:AsyncPostBackTrigger>
</triggers>
</asp:UpdatePanel>
<asp:SqlDataSource ID="SqlAdsRightImage" runat="server" ConnectionString="<%$ ConnectionStrings:sportcal2007ConnectionString %>"
SelectCommand="sp_AdsRightImage" SelectCommandType="StoredProcedure">
<SelectParameters>
<asp:Parameter Direction="ReturnValue" Name="RETURN_VALUE" Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
View 3 Replies
Aug 23, 2010
When i do the following i am getting object ref not set to instance of an object: there is value in string variable would like to assign to a label.
lblFilename.Text = strFilename
View 5 Replies
Feb 23, 2010
how can i assign month to a calendar control?
View 3 Replies
